EPseries - Products of TDK

F E R R I T E S
March 2014
Mn-Zn
Ferrite Cores for Telecommunication
EP series
(2/13)
F E R R I T E S
REMINDERS FOR USING THESE PRODUCTS
Please be sure to read this manual thoroughly before using the products.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment,
home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment,
industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality
require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person
or property.
When using the products for specific purposes, please first make confirmations in areas such as safety, reliability, and quality.
Please understand that we are not in a position to be held responsible for any damage or the like caused by any use exceeding the range
or conditions of this specification sheet or by any use in the specific applications.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When using this product in general-purpose standard applications, you are kindly requested to take into consideration securing protection
circuit/equipment or providing backup circuits, etc to ensure higher safety.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(3/13)
F E R R I T E S
Ferrite Cores for Telecommunication
Product compatible with RoHS directive
Halogen-free
Overview of the EP Series
FEATURES
In the EP Cores, there is a single cubic space where a transformer should be mounted, enabling an optimum dimensional ratio to be
calculated. Apart from the attaching terminal side, the cores entirely cover the coils.
Further, the coil cross-sections are made round, to improved the low-frequency characteristics of the core, and increase the effective
volume.
APPLICATION
Transformers and coils for communication devices
PART NUMBER CONSTRUCTION
H5A
EP10
Material
Size of EP core
H5A
H5C3
EP7
EP10
EP13
EP17
EP20
-
Z
AL-value
(Z: without air gap)
RANGE OF USE AND STORAGE TEMPERATURE
Temperature range
Operating
temperature
(°C)
–30 to +105
Storage
temperature
(°C)
–30 to +85
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(4/13)
F E R R I T E S
Mn-Zn EP series Part No.: H5AEP7-Z
SHAPES AND DIMENSIONS
3.75 +0
– 0.1
6.5 +0
–0.3
2.5 +0.2
–0
3.4 +0
– 0.2
7.4±0.2
1.8max.
9.2±0.2
4.6
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic
path length
C1
(mm–1)
1.52
Electrical characteristics
Effective
core volume
ℓe
(mm)
Effective
crosssectional
area
Ae
(mm2)
Minimum
Crosscrosssectional
sectional area winding area
of core
Acp min.
Acw
2
(mm )
(mm2)
Weigh
Ve
(mm3)
Crosssectional
center pole
area
Acp
(mm2)
15.7
10.3
(g/set)
(nH/N2)min.
162
8.55
8.04
1.4
1100
10.7
AL-value
Effective
permeability
(Pe)
1331
Measuring conditions
Coil:ø0.13mm, 2UEW, 100Ts
Frequency:1kHz
Current level: 0.5mA
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(5/13)
F E R R I T E S
Mn-Zn EP series Part No.: H5C3EP7-Z
SHAPES AND DIMENSIONS
3.75 +0
– 0.1
6.5 +0
–0.3
2.5 +0.2
–0
3.4 +0
– 0.2
7.4±0.2
1.8max.
9.2±0.2
4.6
Dimensions in mm
Effective parameter
Core factor
Effective
magnetic
path length
C1
Electrical characteristics
Effective
cross-sectional
area
Ae
Effective
core volume
Cross-sectional Minimum crosscenter pole area sectional area
Acp
Acp min.
Cross-sectional
winding area
of core
Acw
Weigh
AL-value
(mm–1)
ℓe
(mm)
(mm2)
Ve
(mm3)
(mm2)
(mm2)
(mm2)
(g/set)
(nH/N2)min.
1.52
15.7
10.3
162
8.55
8.04
10.7
1.4
4200
Effective
permeability
(Pe)
5080
Measuring conditions
Coil:ø0.13mm, 2UEW, 100Ts
Frequency:10kHz
Current level: 0.5mA
Voltage: 10mV
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(6/13)
F E R R I T E S
Mn-Zn EP series Part No.: H5AEP10-Z
SHAPES AND DIMENSIONS
7.85 +0
–0.4
1.95max.
0.6
3.45 +0
– 0.3
3.6
9.4±0.2
11.5±0.3
5.83
+0
5.2 – 0.2
+0.2
–0
Dimensions in mm
Effective parameter
Core factor
Effective
magnetic
path length
C1
Electrical characteristics
Effective
cross-sectional
area
Ae
Effective
core volume
Cross-sectional Minimum crosscenter pole area sectional area
Acp
Acp min.
Cross-sectional
winding area
of core
Acw
Weigh
AL-value
(mm–1)
ℓe
(mm)
(mm2)
Ve
(mm3)
(mm2)
(mm2)
(mm2)
(g/set)
(nH/N2)min.
1.7
19.2
11.3
217
8.55
7.79
22.6
2.8
1080
Effective
permeability
(Pe)
1461
Measuring conditions
Coil:ø0.20mm, 2UEW, 100Ts
Frequency:1kHz
Current level: 0.5mA
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(7/13)
F E R R I T E S
Mn-Zn EP series Part No.: H5C3EP10-Z
SHAPES AND DIMENSIONS
7.85 +0
–0.4
1.95max.
0.6
3.45 +0
– 0.3
3.6
9.4±0.2
11.5±0.3
5.83
+0
5.2 – 0.2
+0.2
–0
Dimensions in mm
Effective parameter
Core factor
Effective
magnetic
path length
C1
Electrical characteristics
Effective
cross-sectional
area
Ae
Effective
core volume
Cross-sectional Minimum crosscenter pole area sectional area
Acp
Acp min.
Cross-sectional
winding area
of core
Acw
Weigh
AL-value
(mm–1)
ℓe
(mm)
(mm2)
Ve
(mm3)
(mm2)
(mm2)
(mm2)
(g/set)
(nH/N2)min.
1.7
19.2
11.3
217
8.55
7.79
22.6
2.8
3850
Effective
permeability
(Pe)
5208
Measuring conditions
Coil:ø0.20mm, 2UEW, 100Ts
Frequency:10kHz
Current level: 0.5mA
Voltage: 10mV
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(8/13)
F E R R I T E S
Mn-Zn EP series Part No.: H5AEP13-Z
SHAPES AND DIMENSIONS
6.5 +0
– 0.15
+0
9.0 –0.4
+0.2
4.5 –0
4.5 +0
– 0.3
10.0±0.3
2.5max.
12.5±0.3
6.43
Dimensions in mm
Effective parameter
Core factor
Effective
magnetic
path length
C1
Electrical characteristics
Effective
cross-sectional
area
Ae
Effective
core volume
Cross-sectional Minimum crosscenter pole area sectional area
Acp
Acp min.
Cross-sectional
winding area
of core
Acw
Weigh
AL-value
(mm–1)
ℓe
(mm)
(mm2)
Ve
(mm3)
(mm2)
(mm2)
(mm2)
(g/set)
(nH/N2)min.
1.24
24.2
19.5
472
14.9
13.9
26
5.1
1700
Effective
permeability
(Pe)
1677
Measuring conditions
Coil:ø0.20mm, 2UEW, 100Ts
Frequency:1kHz
Current level: 0.5mA
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(9/13)
F E R R I T E S
Mn-Zn EP series Part No.: H5C3EP13-Z
SHAPES AND DIMENSIONS
6.5 +0
– 0.15
+0
9.0 –0.4
+0.2
4.5 –0
4.5 +0
– 0.3
10.0±0.3
2.5max.
12.5±0.3
6.43
Dimensions in mm
Effective parameter
Core factor
Effective
magnetic
path length
C1
Electrical characteristics
Effective
cross-sectional
area
Ae
Effective
core volume
Cross-sectional Minimum crosscenter pole area sectional area
Acp
Acp min.
Cross-sectional
winding area
of core
Acw
Weigh
AL-value
(mm–1)
ℓe
(mm)
(mm2)
Ve
(mm3)
(mm2)
(mm2)
(mm2)
(g/set)
(nH/N2)min.
1.24
24.2
19.5
472
14.9
13.9
26
5.1
5600
Effective
permeability
(Pe)
5526
Measuring conditions
Coil:ø0.20mm, 2UEW, 100Ts
Frequency:10kHz
Current level: 0.5mA
Voltage: 10mV
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(10/13)
F E R R I T E S
Mn-Zn EP series Part No.: H5AEP17-Z
SHAPES AND DIMENSIONS
8.5 +0
– 0.2
11.25 +0
–0.5
5.5 +0.3
–0
+0
5.85 – 0.35
12.0±0.4
3.45max.
18.0±0.4
7.75
Dimensions in mm
Effective parameter
Core factor
Effective
magnetic
path length
C1
Electrical characteristics
Effective
cross-sectional
area
Ae
Effective
core volume
Cross-sectional Minimum crosscenter pole area sectional area
Acp
Acp min.
Cross-sectional
winding area
of core
Acw
Weigh
AL-value
(mm–1)
ℓe
(mm)
(mm2)
Ve
(mm3)
(mm2)
(mm2)
(mm2)
(g/set)
(nH/N2)min.
0.84
28.5
33.9
966
25.3
23.8
33.8
11.8
2500
Effective
permeability
(Pe)
1672
Measuring conditions
Coil:ø0.20mm, 2UEW, 100Ts
Frequency:1kHz
Current level: 0.5mA
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(11/13)
F E R R I T E S
Mn-Zn EP series Part No.: H5C2EP17-Z
SHAPES AND DIMENSIONS
8.5 +0
– 0.2
11.25 +0
–0.5
5.5 +0.3
–0
+0
5.85 – 0.35
12.0±0.4
3.45max.
18.0±0.4
7.75
Dimensions in mm
Effective parameter
Core factor
Effective
magnetic
path length
C1
Electrical characteristics
Effective
cross-sectional
area
Ae
Effective
core volume
Cross-sectional Minimum crosscenter pole area sectional area
Acp
Acp min.
Cross-sectional
winding area
of core
Acw
Weigh
AL-value
(mm–1)
ℓe
(mm)
(mm2)
Ve
(mm3)
(mm2)
(mm2)
(mm2)
(g/set)
(nH/N2)min.
0.84
28.5
33.9
966
25.3
23.8
33.8
11.8
8000
Effective
permeability
(Pe)
5350
Measuring conditions
Coil:ø0.20mm, 2UEW, 100Ts
Frequency:1kHz
Current level: 0.5mA
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(12/13)
F E R R I T E S
Mn-Zn EP series Part No.: H5AEP20-Z
SHAPES AND DIMENSIONS
10.8 +0
– 0.2
15.3 +0
–0.7
7.0 +0.3
–0
+0
9.0 – 0.5
16.5±0.4
4.7max.
24.0±0.5
10.45
Dimensions in mm
Effective parameter
Core factor
Effective
magnetic
path length
C1
Electrical characteristics
Effective
cross-sectional
area
Ae
Effective
core volume
Cross-sectional Minimum crosscenter pole area sectional area
Acp
Acp min.
Cross-sectional Weigh
winding area
of core
Acw
AL-value
(mm–1)
ℓe
(mm)
(mm2)
Ve
(mm3)
(mm2)
(mm2)
(mm2)
(g/set)
(nH/N2)min.
0.508
39.8
78
312
60.1
56.7
55.4
27.6
4200
Effective
permeability
(Pe)
1698
Measuring conditions
Coil:ø0.35mm, 2UEW, 100Ts
Frequency:1kHz
Current level: 0.5mA
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm
(13/13)
F E R R I T E S
Mn-Zn EP series Part No.: H5C2EP20-Z
SHAPES AND DIMENSIONS
10.8 +0
– 0.2
15.3 +0
–0.7
7.0 +0.3
–0
+0
9.0 – 0.5
16.5±0.4
4.7max.
24.0±0.5
10.45
Dimensions in mm
Effective parameter
Core factor
Effective
magnetic
path length
C1
Electrical characteristics
Effective
cross-sectional
area
Ae
Effective
core volume
Cross-sectional Minimum crosscenter pole area sectional area
Acp
Acp min.
Cross-sectional
winding area
of core
Acw
Weigh
AL-value
(mm–1)
ℓe
(mm)
(mm2)
Ve
(mm3)
(mm2)
(mm2)
(mm2)
(g/set)
(nH/N2)min.
0.508
39.8
78
312
60.1
56.7
55.4
27.6
13500
Effective
permeability
(Pe)
5457
Measuring conditions
Coil:ø0.35mm, 2UEW, 100Ts
Frequency:1kHz
Current level: 0.5mA
• All specifications are subject to change without notice.
001-01 / 20140319 / ferrite_mz_tl_ep_en.fm