V846ME24-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Direct Broadcast • Up/Down Converters £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] • Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 3100 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -89 Harmonic Suppression (2nd) -20 Tuning Voltage 1 Max Units 3500 MHz dBc/Hz -18 dBc 12 Vdc MHz/V 62 Tuning Sensitivity (avg.) 6 dBm Input Capacitance 50 pF Pushing 10 MHz/V Pulling (12 dB Return Loss, Any Phase) 10 MHz 80 °C Max Units Power Output 0 Load Impedance Operating Temperature Range 50 -30 Package Style Power Supply Requirements 3 MINI-14H-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 22 Vdc 27 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V846ME24-LF Rev A1 Tuning Curve, typ. 3700 FREQUENCY (MHz) 3600 3500 3400 80 °C 25 °C 3300 3200 -30 °C 3100 3000 2900 2800 0 1 2 3 4 5 6 7 8 9 10 11 12 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 10 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1 0 2859 2954 3028 3093 3154 3213 3270 3328 3388 3448 3512 3578 3646 FREQUENCY (MHz) 80 °C 25 °C -30 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B