V804ME04-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Earthstations • PCN Basestations • Satellite Modems £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2300 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -97 Harmonic Suppression (2nd) -16 Tuning Voltage 1.5 Max Units 2500 MHz dBc/Hz -13 dBc 10.5 Vdc MHz/V 47 Tuning Sensitivity (avg.) 13 dBm Input Capacitance 50 pF Pushing 3 MHz/V Pulling (14 dB Return Loss, Any Phase) 30 MHz 85 °C Max Units Power Output 7 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 10 MINI-14H Min Typ Supply Voltage (Vcc, nom.) 10 Supply Current (Icc) 16 Vdc 21 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V804ME04-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 2680 2640 2600 2560 2520 2480 2440 2400 2360 2320 2280 2240 2200 2160 2120 2080 2040 2000 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 16 15 14 13 12 11 0.030 MIN. CUTBACK FROM LIVE PADS 10 9 8 7 6 2047 2126 2183 2242 2298 2348 2395 2442 2488 2534 2581 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B