Formosa MS Super Fast Recovery Rectifiers SF1005CT THRU SF1060CT List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Tube packing.................................................................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 1 DS-222439 Issued Date 2009/08/10 Revised Date Revision Page. 2014/03/14 D 6 Formosa MS Super Fast Recovery Rectifiers SF1005CT THRU SF1060CT 10A Super Fast Recovery Rectifiers - 50V-600V Package outline TO-220AB Features • Dual rectifier construction, positive centetap, offer 5.0A 0.419(10.66) 0.387(9.85) half wave and 10.0A full wave rectification • High surge current capability. • Super fast recovery time for switching mode application. • Low power loss . • Glass passivated chip junctions. • Lead-free parts meet environmental standards of MIL-STD-19500/228 • Suffix "-H" indicates Halogen-free parts, ex. SF1005CT-H. 0.196(5.00) 0.163(4.16) 0.054(1.39) 0.045(1.15) 0.269(6.85) 0.226(5.75) 0.624(15.87) 0.548(13.93) 0.139(3.55) MIN 1 2 3 0.177(4.50)MAX 0.038(0.96) 0.019(0.50) 0.50(12.70)MIN Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : JEDEC TO-220AB molded plastic body over 0.1(2.54) 0.025(0.65)MAX passivated chip PIN 1 PIN 3 • Lead : Axial leads, solderable per MIL-STD-202, PIN 2 Dimensions in inches and (millimeters) Method 208 guranteed • Polarity: As marked • Mounting Position : Any • Weight : Approximated 2.10gram Maximum ratings and Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) CONDITIONS Forward rectified current See Fig.1 Forward surge current 8.3ms single half sine-wave (JEDEC methode) V R = V RRM T J = 25 OC Reverse current *1 V RRM (V) A I FSM 100 A T STG V RMS*2 (V) *3 VR (V) 50 100 *4 VF (V) SF1005CT 50 35 SF1010CT 100 70 SF1020CT 200 140 200 SF1040CT 400 280 400 1.25 SF1060CT 600 420 600 1.70 TYP. 5.0 *5 t rr (ns) Operating temperature T J, ( OC) µA 250 RθJC Junction to case Storage temperature SYMBOLS UNIT 10.0 MIN. IR V R = V RRM T J = 125 OC Thermal resistance MAX. IO Symbol O 2.5 O +175 -65 C/W C *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage 0.95 35 -55 to +150 *4 Maximum forward voltage@I F=5.0A *5 Maximum Reverse Recovery Time, note 1 Note: 1. Reverse recovery time test condition, I F =0.5A, I R =1.0A, I RR =0.25A http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 2 DS-222439 Issued Date 2009/08/10 Revised Date Revision Page. 2014/03/14 D 6 Rating and characteristic curves (SF1005CT THRU SF1060CT) FIG.2-TYPICAL FORWARD CHARACTERISTICS FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE V~ 20 0V 100 6 4 2 0 0 20 40 60 80 100 120 140 160 180 200 CASE TEMPERATURE,(°C) 0V 60 8 10 1.0 0.1 FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT o TJ=25 C Pulse Width 300us 1% Duty Cycle .01 8.3ms Single Half 100 0 .2 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE,(V) Sine Wave JEDEC method 75 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 50 25 0 1 5 50 10 100 REVERSE LEAKAGE CURRENT, (uA) PEAK FORWARD SURGE CURRENT,(A) 125 TJ=25°C 40 0V 50 10 INSTANTANEOUS FORWARD CURRENT,(A) AVERAGE FORWARD CURRENT,(A) 12 NUMBER OF CYCLES AT 60Hz FIG.5- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS Tj=125°C trr 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) 0 PULSE GENERATOR -0.25A (NOTE 2) (+) 25Vdc (approx.) D.U.T. ( ) 1W NONINDUCTIVE | | | | | | | | +0.5A PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) (+) OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 3 DS-222439 Issued Date 2009/08/10 Revised Date Revision Page. 2014/03/14 D 6 Formosa MS Super Fast Recovery Rectifiers SF1005CT THRU SF1060CT Pinning information Pin Pin1 Pin2 Pin3 Simplified outline anode cathode anode 1 2 Symbol PIN 1 PIN 3 3 PIN 2 Marking Type number Marking code SF1005CT SF1010CT SF1020CT SF1040CT SF1060CT SF1005CT SF1010CT SF1020CT SF1040CT SF1060CT Tube packing PACKAGE TO-220AB TUBE (pcs) 50 TUBE SIZE (m/m) 535*32*7.0 BOX (pcs) INNER BOX (m/m) 2000 550*167*75 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 CARTON SIZE (m/m) 570*345*170 CARTON (pcs) 8,000 APPROX. GROSS WEIGHT (kg) 23.0 Document ID Page 4 DS-222439 Issued Date 2009/08/10 Revised Date Revision Page. 2014/03/14 D 6 Formosa MS Super Fast Recovery Rectifiers SF1005CT THRU SF1060CT Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 5 DS-222439 Issued Date 2009/08/10 Revised Date Revision Page. 2014/03/14 D 6 Formosa MS Super Fast Recovery Rectifiers SF1005CT THRU SF1060CT High reliability test capabilities Item Test Conditions Reference O 1. Solder Resistance at 260 ± 5 C for 10 ± 2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 OC for 5 sec. MIL-STD-202F METHOD-208 3. High Temperature Reverse Bias V R=80% rate at T J=150 OC for 168 hrs. MIL-STD-750D METHOD-1038 4. Forward Operation Life Rated average rectifier current at T A=25 OC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. MIL-STD-750D METHOD-1036 5. Intermittent Operation Life 6. Pressure Cooker JESD22-A102 15P SIG at T A=121 OC for 4 hrs. MIL-STD-750D METHOD-1051 7. Temperature Cycling -55 OC to +125 OC dwelled for 30 min. and transferred for 5min. total 10 cycles. 8. Forward Surge 8.3ms single half sine-wave , one surge. MIL-STD-750D METHOD-4066-2 9. Humidity at T A=85 OC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 10. High Temperature Storage Life at 175 OC for 1000 hrs. MIL-STD-750D METHOD-1031 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 6 DS-222439 Issued Date 2009/08/10 Revised Date Revision Page. 2014/03/14 D 6