Formosa MS Axial Leaded Super Fast Rectifiers SF51G THRU SF58G List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Taping & bulk specifications for AXIAL devices.................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 1 DS-222410 Issued Date Revised Date 2008/02/10 2010/05/10 Revision C Page. 6 Formosa MS Axial Leaded Super Fast Rectifiers SF51G THRU SF58G 5.0A Axial Leaded Super Fast Rectifiers-50-600V Package outline DO-201AD Features • Low reverse leakage current • Low forward drop down voltage & high current capability • High surge current capability • Super fast switching speed for high efficiency • Glass passivated chip junction • High Reliability • Lead-free parts for green partner, meet RoHS 1.0(25.4) MIN. .220(5.6) .197(5.0) DIA. requirements • Suffix "-H" indicates Halgon free parts, ex. SF51G-H. .375(9.5) .285(7.2) Mechanical data • • • Epoxy : UL94-V0 rated flame retardant 1.0(25.4) MIN. .052(1.3) Case : Molded plastic, DO-201AD .048(1.2) DIA. Lead : Axial leads, solderable per MIL-STD-202, Method 208 guranteed • • • Polarity: Color band denotes cathode end Dimensions in inches and (millimeters) Mounting Position : Any Weight : Approximated 1.10 gram Maximum ratings and Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) CONDITIONS O Forward rectified current Ambient temperature = 55 C Forward surge current 8.3ms single half sine-wave (JEDEC methode) V R = V RRM T J = 25 OC Reverse current Junction to ambient f=1MHz and applied 4V DC reverse voltage Storage temperature IO 5.0 A I FSM 150 A V RMS*2 (V) *3 VR (V) SF51G 50 35 50 SF52G 100 70 100 SF53G 150 105 150 SF54G 200 140 200 SF55G 300 210 300 SF56G 400 280 400 SF57G 500 350 500 SF58G 600 420 600 *4 VF (V) TYP. 5.0 Operating temperature T J, ( OC) *5 t rr (ns) µA 100 R θJA 30 CJ 80 T STG *1 V RRM (V) SYMBOLS UNIT MIN. IR V R = V RRM T J = 125 OC Thermal resistance Diode junction capacitance MAX. Symbol °C/W pF O +175 -65 C *1 Repetitive peak reverse voltage *2 RMS voltage 0.95 *3 Continuous reverse voltage 35 -55 to +150 1.25 *4 Maximum forward voltage@I F=5.0A *5 Maximum Reverse recovery time, note 1 1.70 Note 1. Reverse recovery time test condition, I F =0.5A, I R =1.0A, I RR =0.25A http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 2 DS-222410 Issued Date Revised Date 2008/02/10 2010/05/10 Revision C Page. 6 Rating and characteristic curves (SF51G THRU SF58G) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 50W NONINDUCTIVE trr 10W NONINDUCTIVE ( ) D.U.T. 0 PULSE GENERATOR (NOTE 2) ( ) 1W NONINDUCTIVE | | | | | | | | +0.5A (+) 25Vdc (approx.) AVERAGE FORWARD CURRENT,(A) FIG.1- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC -0.25A (+) OSCILLISCOPE (NOTE 1) -1.0A NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 1cm 2. Rise Time= 10ns max., Source Impedance= 50 ohms. SET TIME BASE FOR 6.0 5.0 4.0 3.0 Single Phase Half Wave 60Hz 2.0 Resistive Or Inductive Load 0.375"(9.5mm) Lead Length 1.0 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE,(°C) 50 / 10ns / cm FIG.4-TYPICAL REVERSE FIG. 3 - TYPICAL FORWARD CHARACTERISTICS CHARACTERISTICS 8G F5 57 SF G -S 55 G -S F5 6G 10 REVERSE LEAKAGE CURRENT, (uA) SF 51 G -S F5 4G INSTANTANEOUS FORWARD CURRENT, AMPERES 100 SF 1.0 0.1 Tj=25 °C PULSE WIDTH-300 us 2% DUTY CYCLE 0.01 0.4 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.6-TYPICAL JUNCTION CAPACITANCE 150 TJ=25 C 140 JUNCTION CAPACITANCE,(pF) PEAK FORWARD SURGE CURRENT,(A) FIG.5-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 8.3ms Single Half Sine Wave 125 JEDEC method 100 75 50 25 120 100 80 60 40 20 0 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 .01 .05 .1 .5 1 5 10 50 REVERSE VOLTAGE,(V) Document ID Page 3 DS-222410 Issued Date Revised Date 2008/02/10 2010/05/10 Revision C Page. 6 100 Formosa MS Axial Leaded Super Fast Rectifiers SF51G THRU SF58G Pinning information Pin Pin1 Pin2 Simplified outline cathode anode Symbol 1 2 1 2 Marking Type number SF51G SF52G SF53G SF54G SF55G SF56G SF57G SF58G Marking code SF51G SF52G SF53G SF54G SF55G SF56G SF57G SF58G Taping & bulk specifications for AXIAL devices 52.4mm 17mm DIA. 55mm Max. A 17mm DIA. 72mm DIA. 71mm Max. 355mm OFF Center both sids 1.0mm Max OFF Alignment 1.2mm 6.3mm REEL PACKING DEVICE Q'TY 1 COMPONENT CARTON Q'TY 2 APPROX. CASE (PCS / REEL) SPACING SIZE (PCS / CARTON) CROSS "A" in FIG. A (m/m) 10 mm 380 * 340 * 370 TYPE DO-201AD 1,200 WEIGHT(kg) 4,800 9.1 AMMO PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS (m/m) (m/m) TYPE DO-201AD 1,200 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 260 * 83 * 160 440 * 270 * 340 WEIGHT(kg) 12,000 Document ID Page 4 DS-222410 17.0 Issued Date Revised Date 2008/02/10 2010/05/10 Revision C Page. 6 Formosa MS Axial Leaded Super Fast Rectifiers SF51G THRU SF58G BULK PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS TYPE (m/m) DO-201AD 500 WEIGHT(kg) (m/m) 305 * 73 * 40 347 * 320 * 271 12,000 16.4 Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 5 DS-222410 Issued Date Revised Date 2008/02/10 2010/05/10 Revision C Page. 6 Formosa MS Axial Leaded Super Fast Rectifiers SF51G THRU SF58G High reliability test capabilities Item Test Conditions Reference o 1. Solder Resistance at 260±5 C for 10±2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 oC for 5 sec. MIL-STD-202F METHOD-208 3. Pull Test 2.0kg in axial lead direction for 10 sec. I F=I O 4. Bend Lead 5. High Temperature Reverse Bias 6. Forward Operation Life 7. Intermittent Operation Life 8. Pressure Cooker MIL-STD-202F METHOD-211A 2.0kg weight applied to each lead bending arc 90 o±5 o for 3 times MIL-STD-202F METHOD-211A V R=80% rate at T J=150 oC for 168 hrs. MIL-STD-750D METHOD-1038 Rated average rectifier current at T A=25 oC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min, on and off for 500 cycles. MIL-STD-750D METHOD-1036 JESD22-A102 15P SIG at T A=121 oC for 4 hrs. MIL-STD-750D METHOD-1051 9. Temperature Cycling -55 oC to +125 oC dwelled for 30 min. and transferred for 5min. total 10 cycles. 10. Forward Surge 8.3ms single half sine-wave one surge. MIL-STD-750D METHOD-4066-2 11. Humidity at T A=85 oC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 12. High Temperature Storage Life at 175 oC for 1000 hrs. MIL-STD-750D METHOD-1031 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 6 DS-222410 Issued Date Revised Date 2008/02/10 2010/05/10 Revision C Page. 6