www.yageo.com Electronic Components for Automotive Applications About Yageo Founded in 1977, the Yageo Corporation has become a world-class provider of passive component services with capabilities on a global scale, including production and sales facilities in Asia, Europe and the Americas. Yageo currently ranks as the world No.1 in chip-resistors, No. 3 in MLCCs and No. 4 in ferrite products, with a strong global presence: 21 sales offices in 15 countries, 9 production sites, 8 JIT logistic hubs, and 2 R&D centers worldwide. Ferroxcube and Vitrohm, who produce ferrites and leaded resistors, are also a part of the Yageo group. We support our customers with extensive literature including datasheets, brochures and application notes, which are also available electronically on our website at: www.yageo.com Table of contents Introduction..............................................................3 Applications..............................................................4 Component Solutions..........................................6 Recommended Products....................................8 Comparison for Automotive Grade vs Commercial Grade ........................................... 12 Product Information - Chip Resistors....... 14 Product Information - MLCCs...................... 16 Product Information - Wireless Components.................................... 18 2 Introduction Gear Up for Automotive Applications Electronic Components for Automotive Applications As the leading service provider of global passive components, Yageo is pleased to bring you this brochure to offer you a full range of products to fulfill your automotive application requirements. The brochure includes thick film automotivegrade chip resistors, automotive-grade MLCCs, antennas and other related products. Compared to other applications, the requirements of the automotive industry for application and specificatoin components are stricter, especially for things such as high reliability, resistance to high temperature and high humidity. Yageo's AC Series for the automotive industry is designed to fulfill customer expectations and demonstrate Yageo's commitment to the industry. Requirements for Automotive Applications Introduction • Narrow Specifications and Cpk Monitoring • 100% AOI for Pattern Matching and Defect Detection • AEC-Q200 Stress Test Qualified • Production Part Approval Process (PPAP) Support • Quality Management ISO/TS 16949 Certified Convenience Environment Safety & Security (Infotainment & Comfort) (Emission Control) (Body Control & Power System) •Electric Cars •Hybrid •Battery Management System (BMS) •DC/DC Converter •Electric Power Steering •Fuel Control •Engine Control Unit (ECU) •Power Seat Control •Body & Motor Control for Power •Electronic Toll Collection (ETC) •Vehicle Information and Communication System (VICS) •Bluetooth Communication •GPS/Navigation •Audio/Video •Air Conditioner Control System •PAS (Parking Assist System) •Automatic Cruise Control Windows, Doors and Mirrors •Keyless Entry System •Lighting Control •Tire Pressure Monitoring System (TPMS) •ABS, Airbag System 3 Applications Product Line Chip Resistors SR 0402~2512 PT 0402~2512 RL 0402~2512 PA 2512 PE 0402~2512 Wireless Components AC 0402~1210 ANT / BPF / LPF / BLN / DPX AA 0201~2512 Electronic Toll Collection (ETC) V V V Vehicle Information and communication System (VICS) V V V 2.4/5 GHz Chip Antenna Bluetooth Communication V V Bluetooth Chip Antenna GPS/Navigation V V GPS/Glonass Chip & Patch Antennas Audio/Video V V Air Conditioner Control System V V PAS (Parking Assist System) V V Automatic Cruise Control V V Size / Series AT 0402~1206 MLCCs AC 0201~2512 Electronic Components for Automotive Applications Automotive Application Matrix Convenience (Infotainment & Comfort) V V V V V V V Applications V Environment (Emission Control) Battery Management System (BMS) V V V V V V DC/DC Converter V V V V V V Electric Power Steering V V Fuel Control V V Engine Control Unit (ECU) V V Power Seat Control V Body & Motor Control for Power Windows, Doors and Mirrors V V Keyless Entry System V V Lighting Control V V V V Safety & Security (Body Control & Power System) 4 V V V V V V V V V V V V V V V V V V Tire Pressure Monitoring System (TPMS) ABS, Airbag System V V Short Range Chip Antennas V V V V V V Short Range Chip Antennas V 5 Component Solutions HID Lighting The main error amplif ier and it s external associated resistors and capacitors will determine where the peak of the power curve occurs as well as the shape of the frequency response of the ballast. 35W DC lamp + Yageo solution for HID lighting control Resistors AC series: AC0402~AC1206 (1Ω-1MΩ) AA series: AA0402~AA2512 (1Ω-10MΩ) PT series: PT0402~PT2512 (100mΩ-910mΩ) RL series: RL0603~RL2512 (10mΩ-910mΩ) Capacitors AC series: AC0402~AC1210 (10pF-2.2μF) C2 R4 C31 50V + C3 C28 + + + R24 VDC + C30 25V + C1 + R30 C4 400V 35V C32 R1 R3 C6 250V + C7 250V R2 (current sensor) R21 R26 R22 LAMP C5 R27 R25 R20 (current sensor) Interior Lighting Applications Power supply for interior lighting applications Interior lighting applications include cluster or instrument backlighting, dome or map reading lights, courtesy lights at doors or in the trunk, and display backlighting. IN OUT C1 V5 REG LEDs C2 Yageo solution for interior lighting Resistors AA series: AA0402~AA2512 (1Ω-10MΩ) PA series: PA1206~PA2512 (1mΩ-100mΩ) PE series: PE0603~PE2512 (1mΩ-100mΩ) Capacitors AC series: AC0402~AC1210 (10pF-2.2μF) 6 Control (IC) + R1 (current sensor) PWM DIMMING EN GND CS Automotive Protected Circuit Electronic Components for Automotive Applications The automotive electrical system makes up of large current electromotor, relay, solenoid, lighting and switch. So it is easy to engender the peak signal and noise. Protected circuit R7 (current sensor) INPUT OUTPUT R5 R1 R6 C1 R8 87 6 Vcc SENSE GATE 1 R2 ON Control (IC) FB TIMER GNDP WRGD 54 C3 CL R9 R10 R3 2 R4 3 C2 Component Solutions Yageo solution for automotive protected circuit Resistors AC series: AC0402~AC1206 (1Ω-1MΩ) AA series: AA0402~AA2512 (1Ω-10MΩ) AT series: AT0402~AT1206 (10Ω-1MΩ) RL series: RL0603~RL2512 (10mΩ-910mΩ) Capacitors AC series: AC0402~AC1210 (10pF-2.2μF) Automotive Current Mode PWM Control Circuit • In order to prevent output leakage current from activating the power switch, the output should be shunted to ground with a resistor. • Timing and by p a ss c ap acit or s should be connected to GND pin in a single point ground. PWM control circuit VPR C1 GND Yageo solution for current mode control circuit Resistors AC series: AC0402~AC1206 (1Ω-1MΩ) AA series: AA0402~AA2512 (1Ω-10MΩ) AT series: AT0402~AT1206 (10Ω-1MΩ) PT series: PT0402~PT2512 (100mΩ-910mΩ) PE series: PE0603~PE2512 (1mΩ-100mΩ) Capacitors AC series: AC0402~AC1210 (10pF-2.2μF) C2 C3 R1 R2 R3 Vcc VREF C10 R5 PVcc VOUT C8 C7 Vcc Vcc - GND R4 C12 SENSE OSC COMP GNDP GND VF8 C13 C5 vc C9 C8 C4 R8 R7 C11 C14 R6 R9 (current sensor) 7 Recommended Products Automotive Grade Chip Resistors: AC Series Features • EIA0201 to 2512 case sizes • 100% AOI at screen printing • Stable process control including narrow specifications and Cpk monitor • 100% AOI after plating • ESD withstands max. voltage of 2KV • Humidity resistance of 1% (1,000 hours @ +85°C, 85% RH, applied 10% of operating power) • Moisture sensitivity level: MSL1 • Soldering profiles according to J-STD-020D • Halogen free epoxy • RoHS compliant Automotive Anti-Sulfurated Chip Resistors: AA Series Features • EIA0201 to 2512 case sizes • Superior resistance against sulfur containing atmosphere (105°C 750hours) • Soldering profiles according to J-STD-020D • AEC-Q200-qualified • Moisture sensitivity level: MSL1 • 100% AOI after plating • Halogen free epoxy • RoHS compliant Automotive Thin Film Chip Resistors: AT Series Features • EIA0402 to 1206 case sizes • Sulfur-resistant (ASTM B809-95 Standard) • Higher pulse load performance, especially for higher ohmic values (> 33k ohm) • AEC-Q200-qualified • Moisture sensitivity level: MSL 1 • Halogen free epoxy • RoHS compliant • 100% AOI after plating Thick Film Low Ohmic Chip Resistors: RL / PT Series Features • Excellent performance at current sensing applications • PT series: excellent T.C.R. and high rated power Applications • Current sensing • Over current protection 8 Features Applications • EIA0402 to 2512 case sizes • Low assembly costs • Circuits requiring high pulse • Ideal for blocking surge voltage in power supplies • Excellent performance at pulse loading Electronic Components for Automotive Applications Surge Chip Resistors: SR Series • High reliability and stability Current Sensors - low T. C. R. Chip Resistors: PR / PA / PE Series Features • Original trimless design significantly improves current detection, making them ideal for large current fast switching circuits • Resistive element composed of a special alloy, resulting in a superior resistance-temperature coefficient Recommended Products • Ultra-low resistance down to 0.0005 Ω • The unique chip structure minimizes thermal stress during temperature cycling, resulting in greater reliability Applications • Ideal for a variety of applications, including current control circuits, over current protect circuits, and battery charge detection Automotive Grade MLCCs: AC Series Features • EIA 0402 to 1812 & array 0508 to 0612 case sizes • DC voltage ratings of 6.3V to 630V • Capacitance offerings ranging from 10pF up to 1μF • High thermal stability • High ripple current capability • Negligible capacitance change with respect to temperature from -55°C to +125°C • Non-polar device, minimizing installation concerns 9 Recommended Products GPS/Glonass Antennas Features Applications • Support GPS & GLONASS system • High radiation efficiency • Navigation device • Telematics box • Pin-solder process • Frequency: 1575/1602 MHz • Fleet management Cellular WWAN Antennas Features Applications • Compact Size • High radiation efficiency • Global cellular network devices • Telematics • Multi-band coverage • Reflow process compatible • Cellular broadband access • M2M module Features Applications • Compact size • Omni-directional radiation • Smart meter • Industrial remote control • Tape & reel automatic mounting • Reflow process compatible • ISM band equipment Short Range Antennas 2.4 GHz Bluetooth/WiFi Antennas 10 Features Applications • Compact size • Omni-directional radiation • 2.4 GHz WiFi device • Bluetooth gadget • Tape & reel automatic mounting • Reflow process compatible • ZigBee device • ISM band equipment Electronic Components for Automotive Applications E Cores Features •Materials: 3C90, 3C92, 3C94, 3C95, 3C96, 3C97, 3F35, 3F36 •Available in a wide variety of sizes Applications •Power converters •Small signal applications •EMI suppression Toroids (Ring Cores) Recommended Products Features •Flame retardant in accordance with UL94V-2 •Materials: 3E27, 3E5, 3E6, 3E10, 3E12, 4A11 Applications •EMC chokes for suppressing RF interference PQ Cores Features •Materials: 3C90, 3C92, 3C94, 3C95, 3C96, 3C97, 3F35, 3F36 •Available in a wide variety of sizes Applications •General purpose transformers •Power conversion Custom Shapes Features •Standard materials •Standard manufacturing process •Design in support to optimize cost and reliability 11 Comparison for Automotive Grade vs Commercial Grade Chip Resistors Automotive Grade vs Commercial Grade Items Documentation Automotive Grade Commercial Grade PPAP with AEC-Q200 test report Standard reliability test report AEC-Q200 IEC 60115-8 / MIL-STD-202G a. 100% AOI at screen printing b. 100% AOI after plating c. Enlarge sampling size Standard control Yes No AC Series RC Series Qualification Criteria Process Control Dedicated Production Machines Chip Resistors Qualification Tests Qualification Tests 1 000 hours at 70 ±5°C applied RCWV 1.5 hours on, 0.5 hours off, still air required Life 1 000 hours at 125°C applied RCWV 1.5 hours on, 0.5 hours off High temperature exposure 1 000 hours at maximum operating temperature depending on specification 1 000 hours at maximum operating temperature depending on specification, unpowered Moisture resistance Each temperature / humidity cycle is defined as 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25°C / 65°C 95% R.H. Each temperature / humidity cycle is defined as 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25°C / 65°C 95% R.H Biased humidity 1 000 hours; + 85°C 85% R.H.; 10% of operating power Measured at 24 ±2 hours after test On request Thermal shock LCT / UCT, number of cycles required is 300 Maximum transfer time is 20 seconds LCT / UCT, number of cycles required is 300 Maximum transfer time is 20 seconds Wetting Electrical test not required. Magnification 50X Lead-free solder bath at 245 ±3°C Dipping time: 3 ±0.5 seconds Electrical test not required. Magnification 50X Lead-free solder bath at 245 ±3°C Dipping time: 3 ±0.5 seconds Resistance to soldering heat Lead-free solder, 260°C, 10 seconds immersion time Lead-free solder, 260°C, 10 seconds immersion time 2.5 times RCWV or maximum overload voltage whichever is less for 5 seconds at room temperature 2.5 times RCWV or maximum overload voltage whichever is less for 5 seconds at room temperature Solderability Short time overload Note: Detailed tests and requirements, please refer to specific data sheets of Yageo automotive chip resistor series. 12 Electronic Components for Automotive Applications MLCC Automotive Grade vs Commercial Grade Item Automotive Grade Commercial Grade PPAP with AEC-Q200 test report Standard reliability test report Qualification Criteria AEC-Q200 IEC 60384 Process Control 100% AOI Standard control Yes No Documentation Dedicated Production Machine MLCC Qualification Tests AC Series CC Series High Temperature Exposure Unpowered; 1,000 hours at T = 150°C Temperature Cycling 1,000 cycles (-55°C to +125°C) Measurement at 24±2 hours after test conclusion Thermal Shock Rapid change of temperature test: NP0/X7R: -55 °C to +125 °C; 300 cycles 15 minutes at lower category temperature; 15 minutes at upper category temperature N/A Moisture Resistance T = 24 hrs/per cycle; 10 continuous cycles unpowered N/A Biased Humidity 1,000 hours at 85°C/85% R.H., with Ur Mechanical Shock Three shocks in each direction shall be applied along the three mutually perpendicular axes of the test specimen (18 shocks) N/A Vibration 5 g’s for 20 minutes, 12 cycles each of 3 orientations N/A ESD Solderability (Steam Aging) Board Flex Beam Load (Body Strength) N/A 5 cycles (-55°C to +125°C) Measurement at 24±2 hours after test conclusion 500 hours at 40°C/95% R.H., with Ur Level Confirmed N/A Guaranteed N/A Class 1: 3 mm, Class 2: 2 mm 1 mm ≤ 0805 Thickness > 0.5mm: 20N Thickness ≤ 0.5mm: 8N ≥ 1206 Thickness > 1.25 mm: 54N Thickness ≤ 1.25 mm: 15N Comparison for Automotive Grade vs Commercial Grade Qualification Tests N/A 13 Product Information - Chip Resistors Electrical characteristics Type unit: mm Power Operating MWV RCOV DWV Temp. range P70 T. C. R. ( ppm/°C) 1Ω≤ R ≤10Ω -100/350 10Ω< R ≤10MΩ ±200 Jumper criteria (unit: A) IRated IMax. 0.5 1.0 100V IRated IMax. 1.0 2.0 150V 100V IRated IMax. 1.0 2.0 150V 300V 300V IRated IMax. 2.0 5.0 200V 400V 500V IRated IMax. 2.0 10.0 AA1210 1/2W 200V 500V 500V IRated IMax. 2.0 10.0 AA1218 200V 500V 500V IRated IMax. 6.0 10.0 AA2010 3/4W 200V 500V 500V IRated IMax. 2.0 10.0 AA2512 200V 500V 500V IRated IMax. 2.0 10.0 25V 50V 50V IRated IMax. 0.5 1.0 AC0402 1/16W 50V 100V 100V IRated IMax. 1.0 2.0 AC0603 1/10W 50V 100V 100V IRated IMax. 1.0 2.0 AC0805 1/8W 150V 300V 300V IRated IMax. 2.0 5.0 AC1206 1/4W 200V 400V 500V IRated IMax. 2.0 10.0 AC1210 1/2W 200V 500V 500V IRated IMax. 2.0 10.0 AC1218 200V 500V 500V IRated IMax. 6.0 10.0 AC2010 3/4W 200V 500V 500V IRated IMax. 2.0 10.0 AC2512 200V 500V 500V IRated IMax. 2.0 10.0 50V 100V 100V AA0201 1/20W -55°C to 125°C 25V 50V 50V AA0402 1/16W 50V 100V AA0603 1/10W 75V AA0805 1/8W AA1206 1/4W -55°C to 155°C 1W 1W AC0201 1/20W -55°C to 125°C -55°C to 155°C 1W 1W AT0402 1/16W AT0603 1/10W AT0805 1/8W AT1206 1/4W 14 Resistance range & tolerance -55°C to 155°C 75V 150V 100V 150V 300V 300V 200V 400V 500V E24 ±5% E24/E96 ±0.5%, ±1% 1 Ω to 10 MΩ Jumper < 0.05Ω 1 Ω≤ R ≤10 Ω ±200 10 Ω< R ≤10MΩ ±100 1Ω≤ R ≤10Ω -100/350 10Ω< R ≤10MΩ ±200 1Ω ≤ R ≤ 10MΩ Jumper < 0.05Ω E24 ±5% E24/E96 ±0.5%, ±1% 1Ω≤ R ≤10Ω ±200 10Ω< R ≤10MΩ ±100 1Ω ≤ R ≤ 1MΩ Jumper < 0.05Ω 1Ω ≤ R ≤10MΩ Jumper < 0.05Ω 10~100KΩ E-24/E96 ±0.1%, ±0.25% ±0.5%, ±1% 10~300KΩ 10~1MΩ ±25 ±50 --- --- --- --- --- --- --- --- Electronic Components for Automotive Applications Packing quantities 178mm / Ø7” reel 330mm / Ø13” reel Embossed Paper Paper 10 000 --- --- 50 000 8mm 10 000 --- 20 000 50 000 0603 8mm 5 000 --- 10 000 20 000 0805 8mm 5 000 --- 10 000 20 000 1206 8mm 5 000 --- 10 000 20 000 1210 8mm 5 000 --- --- 20 000 1218 12mm --- 4 000 --- --- 2010 12mm --- 4 000 --- --- 2512 12mm --- 4 000 --- --- Tape width Paper 0201 8mm 0402 Product Information - Chip Resistors 254mm / Ø10” reel Size code Explanation of ordering code AC 060 3 J R ▬ 07 100K Series name (code 1-2) AC = Automotive grade chip resistors Size code (code 3-6) (inch / metric) 0201 = 0.6 x 0.3 0402 = 1.0 x 0.5 0603 = 1.6 x 0.8 0805 = 2.0 x 1.25 1206 = 3.2 x 1.6 1210 = 3.2 x 2.6 1218 = 3.2 x 4.5 2010 = 5.0 x 2.5 2512 = 6.35 x 3.2 Tolerance (code 7) D = ±0.5% F = ±1% J = ±5% (for jumper ordering) L Default code (code 17) Resistance (code 12-16) 0R = Jumper 10R = 10Ω 100R= 100Ω 100K= 100KΩ Taping reel (code 10-11) 07 = 7 inch Dia. reel 10 = 10 inch Dia. reel 13 = 13 inch Dia. reel T. C. R. (code 9) “―” = Based on spec. Packing style (code 8 ) R = Paper tape reel K = Embossed plastic tape reel 15 Product Information - MLCCs Electrical Characteristics Type AC0402 AC0603 AC0805 AC1206 TC Operating Temp Range Capacitance Range Voltage Range Tolerance NPO -55°C to 125°C 0.47pF~220pF 50 V ±5% X7R -55°C to 125°C 100pF~100nF 10V~50V ±10%, ±20% NPO -55°C to 125°C 0.47pF~680pF 50V~250V ±5% X7R -55°C to 125°C 100pF~220nF 10V~100V ±10%, ±20% NPO -55°C to 125°C 0.47pF~1nF 50V~630V ±5% X7R -55°C to 125°C 150pF~1μF 10V~500V ±10%, ±20% NPO -55°C to 125°C 0.47pF~2.7nF 50V~630V ±5% X7R -55°C to 125°C 220pF~1μF 6.3V~630V ±10%, ±20% NPO -55°C to 125°C 47pF~2.7nF 50V~500V ±5% X7R -55°C to 125°C 2.2nF~1μF 6.3V~500V ±10%, ±20% AC1812 X7R -55°C to 125°C 2.2nF~1μF 50V~100V ±10%, ±20% AC0508 (Array) NPO -55°C to 125°C 10pF~100pF 50 V ±5%, ±10% X7R -55°C to 125°C 1.0nF~10nF 16V~50V ±10%, ±20% AC0612 (Array) NPO -55°C to 125°C 10pF~470pF 50 V ±5%, ±10% X7R -55°C to 125°C 220pF~47nF 16V~50V ±10%, ±20% AC1210 Thickness classes and packing quantities 0402 0.5 ±0.05 / ±0.15 / ±0.20 10 000 --- 50 000 --- 0603 0.8 ±0.1 / ±0.2 4 000 --- 15 000 --- 0.6 ±0.1 4 000 --- 20 000 --- 1206 1812 Paper Blister Paper Blister 0.85 4 000 --- 15 000 --- 1.25 ±0.2 --- 3 000 --- 10 000 0.6 ±0.1 4 000 --- 20 000 --- 0.85 ±0.1 4 000 --- 15 000 --- 1.15 ±0.1 --- 3 000 --- 10 000 1.25 ±0.2 --- 3 000 --- 10 000 1.6 ±0.2 --- 2 000 --- 10 000 --- 4 000 --- 10 000 --- 3 000 --- --- 0.85 ±0.1 1210 16 330mm / Ø13” reel Thickness classification (mm) 0805 Tape width 180mm / Ø7” reel Size code 1.25 ±0.2 8 mm 1.6 --- 2 000 --- --- 0.85 --- 2 000 --- --- 1.15 --- 1 000 --- --- 1.25 --- 1 000 --- --- 1.6 --- 1 000 --- --- 4 000 --- --- --- 4 000 --- --- --- 0.6 0508 (Array) 0.8 0612 (Array) 0.8 0.6 Dimensions Metric L1 W L2 / L3 min L2 / L3 max L4 min 0402 1005M 1.0 ±0.05 0.5 ±0.05 0.15 0.30 0.40 0603 1608M 1.6 ±0.10 0.8 ±0.10 0.20 0.60 0.40 0805 2012M 2.0 ±0.20 1.25 ±0.20 0.25 0.75 0.55 1206 3216M 3.2 ±0.30 1.6 ±0.20 0.25 0.75 1.40 1210 3225M 3.2 ±0.30 2.5 ±0.20 0.25 0.75 1.40 W L2 L4 L1 L3 B 1812 3245M 4.5 ±0.40 3.2 ±0.30 0.25 0.75 2.20 Inch-based Metric L W A B P 0508 (Array) 1220M 2.0 ±0.15 1.25 ±0.15 0.28 ±0.10 0.2 ±0.10 0.5 ±0.10 0612 (Array) 1632M 3.2 ±0.15 1.6 ±0.15 0.4 ±0.10 0.3 ±0.20 0.8 ±0.10 W L A P T Electronic Components for Automotive Applications Inch-based Product Information - MLCCs Explanation of ordering code AC 0402 K R X7R 8 B B 102 Series name (code 1-2) AC = Automotive grade capacitors Size code (code 3-6) 0402 0603 0805 1206 1210 1812 0508(Array) 0612(Array) Capacitance tolerance (code 7) J = ±5% K = ±10% M=±20% Packing style (code 8) R = Paper / PE tape reel Ø7 inch P = Paper / PE tape reel Ø13 inch K = Embossed plastic tape reel Ø7 inch F = Embossed plastic tape reel Ø13 inch TC material (code 9-11) NP0 X7R Capacitance value (code 15-17) 102 = 1 000 pF (2 significant digits+number of zeros; the 3rd digit signifies the multiplying factor, and letter R is decimal point) 0=x1 1 1 = x 10 2 2 = x 10 3 3 = x 10 4 4 = x 10 5 5 = x 10 6 6 = x 10 7 7 = x 10 X X R = Special capacitance (X X: capacitance before decimal point) Process code (code 14) N = NP0 B = X7R Termination (code 13) B = Ni-Barrier Rated voltage (code 12) A = 200 V 5 = 6.3 V = 500 V B 6= 10 V = 250 V Y 7 = 16 V 8 = 25 V = 630 V Z 9 = 50 V 0 = 100 V 17 Product Information - Wireless Components Product Series Cellular WWAN 2.4 GHz GPS GPS+Glonass Active GPS Active GPS+Glonass ISM Bands 18 Part Number Part Number Frequency range (new) (old) (MHz) Gain Size Assembly ANT2112A010B0918A CAN4313284109181B 824~960/ 1710~1990 0~1 dBi 21*12*0.5 SMD (mm) ANT3505B000TWPENA CAN4313449009181B 824~960 /1710~2170 2.9 dBi 35*5*6 SMD ANTX100P001BWPEN3 - 824~960/ 1710~2170 4.2 dBi 50*20*0.55 I-PEX dia 1.13, 100mm ANT1204F001R2400A CAN4311059012451K 2400~2500 6.66 dBi 12*4*2 SMD ANT3216LL00R2400A CAN4311712002453K 2400~2500 5 dBi 3.2*1.6*1.3 SMD ANT3216A063R2400A CAN4311212632453K 2400~2500 1.69 dBi 3.2*1.6*0.5 SMD ANT2012LL13R2400A CAN4311714132454K 2400~2500 2.72 dBi 2.0*1.2*1 SMD ANTX200P001B24003 - 2400~2500 4.8 dBi 18.4*7.5*0.55 I-PEX dia 1.13, 200mm ANT1515B00BT1575A CAN43134230B1581B 1575 1.5 dBic 15*15*4 SMD ANT1818B00FT1575A CAN43134240F1581B 1575 4 dBic 18*18*4 Pin Solder ANT2525B00BT1575A CAN43134250B1581B 1575 5.5 dBic 25*25*4 SMD ANT1818B00BT1516A CAN43134240B1561B 1575 / 1602 1.89 / 2.59 dBi 18*18*4 SMD ANT1818B00DT1516A CAN43134240D1561B 1575 / 1602 2.65 / 2.79 dBi 18*18*4 Pin Solder ANT2525B00BT1516A CAN43134250B1561B 1575 / 1602 3.44 / 4.10 dBi 25*25*4 SMD ANT2525B00DT1516A CAN43134250D1561B 1575 / 1602 3.5 / 3.8 dBi 25*25*4 Pin Solder ANT1212JB27B1575A CAN4313322271581B 1575 25 dB 12*12*6.5 Connector ANT1818JB30B1575A CAN4313324301581B 1575 25 dB 18*18*7.1 Connector ANT2525JB08B1575A CAN4313325081581B 1575 16 dB 25*25*7.5 Connector ANT1606JB12B1575A CAN4313346121581B 1575 20 dB 20*6*6.4 Connector ANT8010JLC1B1516A CAN4313981C11561B 1575 / 1602 20/20 dB 22*6*1.9 Connector ANT1204LL05R0915A CAN4311759050911K 915 3.32 12*4*1.6 SMD ANT1204LL08R0870A CAN4311759080871K 870 0.5 12*4*1.6 SMD ANT7020LL05R0870A CAN4311772050872K 870 N/A 7.0*2.0*0.7 SMD ANT1204LL20R0433A CAN4311759200431K 433 0.83 12*4*1.2 SMD ANT1204LL20R0315A CAN4311759200311K 315 N/A 12*4*1.2 SMD ANT2405F001R0169A CAN4311050010162K 169 N/A 24*5*1.2 SMD SDARS ANT2020B00FT2300A CAN43134200F2301B 2320~2345 N/A 20*20*4 Pin Solder FM ANT2405F001R0098A CAN4311050010882K 88~108 N/A 24*5*1.6 SMD Electronic Components for Automotive Applications Explanation of ordering code Ordering example : ANT3216A063R2400A ANT 3216 A Product Type (code 1) ANT: Antenna BPF: Band-Pass Filter LPF: Low-Pass Filter BLN: Balun BLF: Balun Filter DPX: Diplexer 3216: 3.2 x 1.6 mm 2012: 2.0 x 1.2 mm 2520: 2.5 x 2.0 mm Factory Control Code / Cable Type (code 7) Frequency Band (MHz)(code 6) 2400: 2.4 – 2.5 GHz; 2455: 2.4&5 GHz 1575: GPS; 1516: GPS+Glonass 0433: 433 MHz 0870: 868 MHz 0918: 900/1800 MHz WQUD: 850/900/1800/1900 MHz WPEN: 850/900/1800/1900/2100 MHz Product Information - Wireless Components (1) Size (mm) - SMD (LTCC) (code 2) 063 R 2400 A (2) Connector - Cable length (mm) Stand-alone (code 2) Ex: X100 – IPEX connector, 100 mm cable length X: IPEX, M: MMCX, S: SMA, Z: Stripped 100: 100 mm cable length Packing Style (code 5) R: Tape & Reel T: Tray B: Bulk Type (code 3) L, F, A: Chip antenna / Filter / Balun B: Bulk antenna P: PCB X: FPCB S: Metal E: External J: Integrated antenna Serial No. (code 4) 19 YAGEO - A GLOBAL COMPANY HQ Taipei, Taiwan Tel. +886 2 6629 9999 Fax. +886 2 6628 8886 Mail: [email protected] China and ASIA EUROPE NORTH AMERICA Suzhou, China Singapore Munich, Germany San Jose, U.S.A. Tel. +86 512 6825 5568 Fax. +86 512 6825 5386 Mail: [email protected] Tel. +65 6244 7800 Fax. +65 6244 4943 Mail: [email protected] Tel. +49 8990 7784 380 Fax. +49 8990 7784 379 Mail: [email protected] Tel. +1 408 240 6200 Fax. +1 408 240 6201 Mail: [email protected] Qingdao, China Kuala Lumpur, Malaysia Milan, Italy Mexico Tel. +86 532 8797 0533 Fax. +86 532 8797 0533 Mail: [email protected] Tel. +60 3 8063 8864 Fax. +60 3 8063 7376 Mail: [email protected] Tel. +39 02 6129 1017 Fax. +39 02 6601 7490 Mail: [email protected] Tel. +52 33 31330631 Fax. +1 408 240 6201 Mail: [email protected] Dongguan, China Penang, Malaysia Roermond, Benelux Tel. +86 769 8772 0275 Fax. +86 769 8791 0053 Mail: [email protected] Tel. +60 4 3973049 Fax. +60 4 3973050 Mail: [email protected] Tel. +31 475 385 555 Fax. +31 475 385 589 Mail: [email protected] Tokyo, Japan Szombathely, Hungary Tel. +81 3 6809 3972 Fax. +81 3 6809 3982 Mail: [email protected] Tel. +36 94 517 702 Fax. +36 94 517 701 Mail: [email protected] Seongnam, Korea Moscow, Russian Federation Tel. +82 31 712 4797 Fax. +82 31 712 5866 Mail: [email protected] Tel. +7 965 408 1811 Fax. +7 498 610 0707 Mail: [email protected] For a complete listing of all Yageo sales offices, distributors, and representatives, please visit "contact us" at www.yageo.com © YAGEO Corporation All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. Printed in Taiwan Document order number:YL 100 00138 Date of release: April 2014