P OWE R T RAN S FO R M E R CHASSIS MOUNT : Isolation N-67A Electrical Specifications (@25°C) 1. Maximum Power: 150 VA 2. Input Voltage: Parallel: 115V@50/60Hz Series:230V@50/60Hz 3. Output Voltage: 115V + 5% 4. Full Secondary Load: 1.3 Amps RMS 5. Voltage Regulation: 5 % TYP @ full load to no load Description: The N-67A is power transformer for isolating equipment from direct connection to the power line. It is constructed with nonconcentrically wound coils. The primary and secondary are wound on separate arbors, then assembled on a laminate core side-by-side separated by insulation. This prevents electrical connection under normal or overload conditions between the primary and secondary windings. A Safety: PRIMARY These units are designed with 1500V isolation between winding to winding and between winding and core. Materials and construction are rated for Class B insulation system. D B Dimensions: F LEADS Unit: In inches A B C D E F 3.875 3.281 3.875 2.50 3.00 2.00 Weight: 7.0 Lbs. Mounting Holes: .375 x .187” Connections: 10.0±1” leads, 0.250±0.062” Skin & Tin Schematic: BLK E BLK/YEL RED C BLK/RED RED BLK/GRN WHT SHIELD INPUT - Series: BLK to BLK/GRN, JUMPER BLK/YEL to BLK/RED Parallel: BLK to BLK/YEL, JUMPER BLK to BLK/RED and BLK/YEL to BLK/GRN OUTPUT: RED to RED SHIELD: WHT RoHS Compliance: As of manufacturing date February 2005, all standard products meet the requirements of 2011/65/EU, known as the RoHS initiative. SH LEAD SEC LEAD S * Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version. Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 460 Harley Knox Blvd. Perris, California 92571 Publish Date: December 4, 2013