Westcor Product Part Numbering System FlatPAC-EN (500W @ 115/230 Vac FLx1-x2 x3-xxx (-x4) e.g. FL4-04-264 425W for EN61000-3-2) PFC MicroS PSx1-x2 x3-xxx e.g. PS3-03-501 (600W @ 230 Vac) (500W @ 115 Vac) PFC Micro PCx1-x2 x3-xxx e.g. PC6-06-501 (800W @ 230 Vac) (500 @ 115 Vac) PFC Mini (1,500W@ 230 Vac) PMx1-x2 x3-xxx(-LL) e.g. PM4-22-501 (800W @ 115 Vac) PFC MegaPAC (1,600W @ 230 Vac) (1,200 W @ 115 Vac) x1 # of outputs x2 # of 1st Gen modules x3 # of 2nd Gen modules x4 E= Extended Temp Range xxx # assigned by Westcor x1 # of outputs x3 # of 2nd Gen modules xxx # assigned by Westcor x1 # of outputs x3 # of 2nd Gen modules xxx # assigned by Westcor x1 LL = Low Leakage x2 # of 1st Gen modules x2 # of 1st Gen modules # of outputs x2 # of 1st Gen modules x3 # of 2nd Gen modules LL Low Leakage xxx # assigned by Westcor # of outputs xB # of modules # assigned by Westcor 2nd Gen module used 7 LL PFC chassis Low Leakage MPx A -7x B xxx (-LL) xA e.g. MP5-78143 xxx MX MXxA-7xBxxx (2,400W @ 230 Vac with 2nd Gen) e.g. MX4-74143 PFC MegaPAC-EL MPx A -7x B xxx-EL xA # of outputs xB # of modules (1,600W @ 230 Vac) (1,200W @ 115 Vac) e.g. MP6-76143-EL MXx A -7x B xxx-EL xxx MX # assigned by Westcor 2nd Gen module used 7 -EL PFC chassis Extended length (2,400W @ 230 Vac e.g. MX4-74152-EL A/R MegaPAC MPx A -9x B xxx xA # of outputs xB # of modules (1,600W @ 230 Vac) (1,200W @ 115 Vac) e.g.. MP5-98143 xxx # assigned by Westcor 9 Autoranging chassis Mini MegaPAC MMx A -1x B xxx xA # of outputs xB # of modules (1,000W @ 115 or 230) e.g. MM4-14112 xxx # assigned by Westcor 1 Mini MegaPAC chassis xA # of outputs xB # of modules xxx xG=2 # assigned by Westcor 1st Gen in slot 1 4kW chassis 2nd Gen in slot 1 xH=2 1st Gen in slot 10 4 xG=3 xH=3 -EL Extended length chassis xA # of outputs xB # of modules xxx xG=2 # assigned by Westcor 1st Gen in slot 1 4 xG=3 4kW chassis 2nd Gen in slot 1 xH=2 1st Gen in slot 10 xH=3 2nd Gen in slot 10 -EL Extended length chassis for use with QPACs 4kW MegaPAC (Using 1st Gen) MPxA-4xBxxx-xGxH(-EL) (2,000W@3 Phase) e.g. MP10-410008-22(-EL) (1,200W@1 Phase) 4kW MegaPAC (Using 2nd Gen) MXxA-4xBxxx-xGxH(-EL) (4,000W/3 Phase ) e.g. MX10-410008-32(-EL) (1,500W/1 Phase) Vicor 800-735-6200 Westcor Division 408-522-5280 2nd Gen in slot 10 vicorpower.com Rev. 8/2003 ConverterPAC Numbering System (Slide-in assemblies for MegaPAC Family) Cx D V_x E Ax F C ConverterPAC type* xE Current out (to 1 decimal point) e.g. M15V_10ADF D15V_6A7A-12V_8A3AT V xD Volt. Voltage out A xF Amps Option (s ) * ConverterPACs with 1st Gen modules M - ModuPAC LD - DualQPAC J - JuniorPAC LJ - Junior QPAC D - DualPAC R - RamPAC ConverterPAC Options D DC OK or Power Good F Full 50-110% output adjustment P Preload R RAM external1 ConverterPAC features and options available Designator Type D M ModuPAC X D DualPAC NA B BatPAC NA J JuniorPAC X R RamPAC N/A L QPAC X LD DualQPAC X LJ Junior QPAC X PF FinPAC X XM UniPAC X XL QPAC (XL) X PFL FinQPAC X L - QPAC B - BatPAC ConverterPACs with 2nd Gen module PF - FinPAC (Maxi)/ 375 Vin XM - UniPAC (Maxi)/ 300 Vin XL - QPAC (Maxi)/ 300 Vin PFL - FinQPAC (Maxi)/375 Vin S T V1 Trimpot removed for BatPAC adjustment 90-110 output adjustment "VXI" low noise (150 mV or less) 24V outputs V2 V3 "VXI" low noise (50 mV or less) for outputs < 24V 1% ripple or less for outputs >24V F X X NA X X X NA X X X X X R X X NA X NA NA NA NA NA NA NA NA T X X NA X X X NA X X X X X V X X NA X NA NA NA NA NA NA NA NA 1 When using an external RAM, components such as autosense resistors and local sense jumpers must be removed before turning on the supply. In addition, in order to insure proper operation, sense pins must be connected either locally or remotely after the RAM's output. For further information,contact Applications Engineering. Note: All ConverterPACs have Autosense except the QPAC (XL). ConverterPACs are NOT used in the LoPAC Family i.e. PFC Mini, PFC Micro, PFC MicroS and FlatPAC-EN. Product Notes MegaPAC Family Features • Power Factor Corrected (PFC) (some) • Field and user configurable outputs • General Shutdown/Sequencing (Enable/Disable) • Input power fail (AC OK) • Low Noise EL products feature 10mV p-p or less LoPAC Family Features • Power Factor Corrected (PFC) • Factory configured to user’s output needs • General Shutdown/Sequencing (Enable/Disable) • Input power fail (AC OK) • High power densities (> 8 Watts/inch3) FlatPAC-EN • EN 61000-3-2 harmonic current compliance • Output power to 500 W (425@ for EN compliance) • Power Density > 7W/in3 • RS-232 Microcontroller interface •Rugged: Meets MIL-STD-810E, Cat. 10 Vicor 800-735-6200 Westcor Division Note: The FlatPAC-EN is the only Westcor power supply that does not have an internal fan. 408-522-5280 vicorpower.com Rev. 8/2003