Middle Power Class-D Speaker Amplifiers Analog Input / BTL Output Class-D Speaker Amplifier BD5427EFS No.10075EBT06 ●Description BD5427EFS is a 7W + 7W stereo class-D power amplifier IC, developed for space-saving and low heat-generation applications such as low-profile TV sets. The IC employs state-of-the-art Bipolar, CMOS, and DMOS (BCD) process technology that eliminates turn-on resistance in the output power stage and internal loss due to line resistances up to an ultimate level. With this technology, the IC has achieved high efficiency of 80% (7W + 7W output with 8Ω load). The IC,in addition, employs a compact back-surface heat radiation type power package to achieve low power consumption and low heat generation and eliminates necessity of installing an external radiator, up to a total output of 14W. This product satisfies both needs for drastic downsizing, low-profile structures and powerful, high-quality playback of the sound system. ●Features 1) A high efficiency of 80% (7W + 7W output with 8Ω load), which is the highest grade in the industry and low heat-generation. 2) Driving a lowest rating load of 6Ω is allowed. 3) Pop noise upon turning power on/off and power interruption has been reduced. 4) High-quality audio muting is implemented by soft-switching technology. 5) High-reliability design provided with built-in protection circuits against high temperatures, against VCC shorting and GND shorting, against reduced-voltage, and against applying DC voltage to speaker. 6) A master/slave function allowing synchronization of multiple devices reduces beat noises. 7) Adjustment of internal PWM sampling clock frequencies (250kHz to 400kHz) allows easy protective measures against unwanted radio emission to AM radio band. 8) A compact back-surface heat radiation type power package is employed. HTSSOP-A44(5mm × 7.5mm × 1.0mm, pitch 0.8mm ●Absolute Maximum Ratings A circuit must be designed and evaluated not to exceed absolute maximum rating in any cases and even momentarily, to prevent reduction in functional performances and thermal destruction of a semiconductor product and secure useful life and reliability. The following values assume Ta =25℃. For latest values, refer to delivery specifications. Parameter Supply voltage Symbol Ratings Unit Conditions VCC +20 V Pin 7, 8, 15, 16, 29, 30, 37, 38, 40 (Note 1, 2) 2.0 W (Note 3) 4.5 W (Note 4) Power dissipation Pd Input voltage for signal pin VIN -0.2 to +7.2 V Pin 1, 44 (Note 1) Input voltage for control pin VCONT -0.2 to Vcc+0.2 V Pin 20, 24 (Note 1) Input voltage for clock pin VOSC -0.2 to +7.2 V Pin 23 (Note 1) Operating temperature range Topr -40 to +85 ℃ Storage temperature range Tstg -55 to +150 ℃ Tjmax +150 ℃ Maximum junction temperature (Note 1) A voltage that can be applied with reference to GND (pins 11, 12, 33, 34, and 43) (Note 2) Pd and Tjmax=150℃must not be exceeded. (Note 3) 70mm × 70mm × 1.6mm FR4 One-sided glass epoxy board (Back copper foil 0%) installed. If used under Ta=25℃or higher, reduce 16mW for increase of every 1℃. The board is provided with thermal via. (Note 4) 70mm × 70mm × 1.6mm FR4 Both-sided glass epoxy board (Back copper foil 100%) installed. If used under Ta=25℃or higher, reduce 36mW for increase of every 1℃. The board is provided with thermal via. www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 1/15 2010.05 - Rev.B Technical Note BD5427EFS ●Operating Conditions The following values assume Ta =25℃. Check for latest values in delivery specifications. Parameter Symbol Ratings Unit Conditions Supply voltage VCC +10 to +16.5 V Pin 7, 8, 15, 16, 29, 30, 37, 38, 40 Load resistance RL 6 to 16 Ω (Note 5) (Note 5) Pd should not be exceeded. ●Electrical Characteristics Except otherwise specified Ta = 25℃, VCC = 12V, fIN = 1kHz, Rg = 0Ω, RL = 8Ω,MUTEX="H", MS="L" For latest values, refer to delivery specifications. Parameter Symbol Limits Unit Conditions Circuit current 1 (Sampling mode) ICC1 25 mA With no signal Circuit current 2 (Muting mode) ICC2 10 mA MUTEX = “L” “H” level input voltage VIH 2.3 to 12 V MUTEX, MS “L” level input voltage VIL 0 to 0.8 V MUTEX, MS Voltage gain GV 28 dB PO = 1W Maximum output power 1 (Note 6) PO 7 W THD+N = 10% Total harmonic distortion (Note 6) THD 0.1 % PO = 1W, BW=20Hz to 20kHz Crosstalk CT 85 dB PO = 1W, Rg = 0Ω, BW = IHF-A Output noise voltage (Sampling mode) VNO 80 µVrms Rg = 0Ω, BW = IHF-A Residual noise voltage (Muting mode) VNOM 1 µVrms Rg = 0Ω, BW = IHF-A, MUTEX = “L” Internal sampling clock frequency FOSC 250 kHz Whole circuit Control circuit Audio circuit MS = “L” (In master operation) (Note 6) The rated values of items above indicate average performances of the device, which largely depend on circuit layouts, components, and power supplies. The reference values are those applicable to the device and components directly installed on a board specified by us. www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 2/15 2010.05 - Rev.B Technical Note BD5427EFS ●Electrical characteristic curves (Reference data) (1) Under Stereo Operation(RL=8Ω) 100 6kHz 1 0.1 100Hz 0.01 1 0.1 1kHz 0.01 0.001 Vcc=12V RL=8Ω Po=1W BW=20～20kHz 10 THD+N (%) 10 THD+N (%) 100 Vcc=12V RL=8Ω BW=20～20kHz 0.1 1 0.01 10 10 100 100 100000 Fig. 2 THD+N － Frequency 0 40 35 Vcc=12V RL=8Ω Po=1W BW=20～20kHz -20 30 25 CROSSTALK (dB) VOLTAGE GAIN (dB) 10000 FREQUENCY (Hz) OUTPUT POWER (W) Fig. 1 THD+N － Output power Vcc=12V RL=8Ω Po=1W L=33μ H C=0.47μF Cｇ=0.1μF 20 15 10 5 0 -40 -60 -80 -100 10 100 1000 10000 10 100000 100 Fig. 3 Voltage gain - Frequency 20 OUTPUT POWER (W) Vcc=12V RL=8Ω fin=1kHz BW=20～20kHz -40 -60 -80 -100 0.001 0.01 0.1 1 10 100 15 10 5 0 8 Crosstalk - Output power www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 100000 RL=8Ω fin=1kHz THD=10% OUTPUT POWER (W) Fig. 5 10000 Fig. 4 Crosstalk - Frequency 0 -20 1000 FREQUENCY (Hz) FREQUENCY (Hz) CROSSTALK (dB) 1000 Fig. 6 3/15 10 12 14 VCC (V) 16 18 Output power - Power supply voltage 2010.05 - Rev.B Technical Note BD5427EFS 100 90 80 70 60 50 40 30 20 10 0 EFFICIENCY (%) EFFICIENCY (%) ●Electrical characteristic curves (Reference data) – Continued . Vcc=10V RL=8Ω fin=1kHz 0 5 10 15 100 90 80 70 60 50 40 30 20 10 0 20 Vcc=12V RL=8Ω fin=1kHz 0 5 OUTPUT POWER (W/ch) Fig. 8 Efficiency - Output power Vcc=16.5V RL=8Ω fin=1kHz Vcc=16.5V Vcc=12V 2 ICC (A) EFFICIENCY (%) 20 3 Vcc=10V 1 RL=8Ω fin=1kHz 0 0 5 10 OUTPUT POWER (W/ch) 0 15 100 90 80 70 60 50 40 30 20 10 0 5 10 15 20 25 30 35 40 TOTAL OUTPUT POWER (W) Fig. 9 Efficiency - Output power Fig. 10 Current consumption - Output power 0 RL=8Ω 無信号時signal Without Vcc=12V RL=8Ω Without signal 無信号時 BW=20～20kHz -20 NOISE FFT (dBV) ICC (mA) 15 OUTPUT POWER (W/ch) Fig. 7 Efficiency - Output power 100 90 80 70 60 50 40 30 20 10 0 10 Sampling Mute -40 -60 -80 -100 -120 -140 8 10 12 14 VCC (V) 16 10 18 www.rohm.com 1000 10000 100000 FREQUENCY (Hz) Fig. 11 Current consumption - Power supply voltage © 2010 ROHM Co., Ltd. All rights reserved. 100 Fig. 12 FFT of Output Noise Voltage 4/15 2010.05 - Rev.B Technical Note BD5427EFS ●Electrical characteristic curves (Reference data) – Continued . MUTEX Pin 20 Vcc=12V 1 0 V/div RL = 8 Ω MUTEX Pin 20 1 0 V/div RL = 8 Ω Po=500 m W TM Pin 2 6 fi n = 5 0 0 H z 5 V/div Vcc=12V 2 V/div Po=500 m W TM Pin 26 5 V / div 2 V / div Speaker output Speaker output fi n = 5 0 0 H z 1 0 m s e c/ div 1 0 m s e c/ div Fig. 13 Wave form when Releasing Soft-mute Fig. 14 Wave form when Activating Soft-mute VCCA VCCA VHOLD Pin 27 5V/div VHOLD Pin 27 TM Pin 26 5V/div Vcc=12V RL =8 Ω Po=500mW TM fin=3kHz Pin 26 2V/div Speaker output 5V/div 2V/div 2msec/div Fig. 15 Wave form on Instantaneous Power Interruption (20msec / div) www.rohm.com Vcc=12V RL =8 Ω Po=500mW fin=3kHz Speaker output 20msec/div © 2010 ROHM Co., Ltd. All rights reserved. 5V/div 5/15 Fig. 16 Wave form on Instantaneous Power Interruption (2msec / div) 2010.05 - Rev.B Technical Note BD5427EFS ●Electrical characteristic curves (Reference data) (2) Under Stereo Operation(RL=6Ω) . OUTPUT POWER (W) 25 RL=6Ω fin=1kHz THD=10% 20 15 10 5 0 8 10 12 14 VCC (V) 16 18 100 90 80 70 60 50 40 30 20 10 0 EFFICIENCY (%) EFFICIENCY (%) Fig. 17 Output power - Power supply voltage Vcc=10V RL=6Ω fin=1kHz 0 5 10 15 OUTPUT POWER (W/ch) 100 90 80 70 60 50 40 30 20 10 0 20 0 5 10 15 OUTPUT POWER (W/ch) 20 Fig. 19 Efficiency - Output power 4 3 Vcc=16.5V Vcc=12V ICC (A) EFFICIENCY (%) Fig. 18 Efficiency - Output power 100 90 80 70 60 50 40 30 20 10 0 Vcc=12V RL=6Ω fin=1kHz Vcc=16.5V RL=6Ω fin=1kHz 2 Vcc=10V RL=6Ω fin=1kHz 1 0 0 5 10 15 OUTPUT POWER (W/ch) 20 0 5 10 15 20 25 30 35 40 TOTAL OUTPUT POWER (W) Fig. 20 Efficiency - Output power Fig. 21 Current consumption - Output power Dotted lines of the graphs indicate continuous output power to be obtained on musical signal source or by installing additional heat sinks. www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 6/15 2010.05 - Rev.B 0.08 ± 0.05 0.85 ± 0.05 1.0 MAX 0.75 ± 0.1 0.95 ± 0.2 0.85 Fig. 23 © 2010 ROHM Co., Ltd. All rights reserved. www.rohm.com Fig. 22 44 (6.0) 1 1PIN MARK 7/15 12 13 GNDP1 OUT1N BD5427EFS 20 M U TEX M ute Control ERROR W A RNING N.C. 22 N.C. N.C. 21 N.C. 19 18 W ARNING ERROR 17 Output DC V ol tage Protection Output Short Protection H igh Temperature Protection Under V ol tage Protection Protections & Logic DRI VER 1N BSP1N DRI VER 1P 16 PW M 2 DRI VER 2N V CCP1N 15 11 GNDP1 V CCP1N 10 OU T1P 14 9 OU T1P OUT1N 8 V CCP1P PW M 1 DRI VER 2P (5.0) 5 N.C. N.C. 7 4 N.C. N.C. V CCP1P 3 N.C. 6 N.C. 2 N.C. BSP1P N.C. 1 IN1 Clock Control Ramp Generator Sof t M ute Power-off Detector 23 OSC 24 M S 25 ROSC 26 TM 27 V HOL D 28 BSP2N 29 V CCP2N 30 V CCP2N 31 OUT2N 32 OUT2N 33 GNDP2 34 GNDP2 35 OUT2P 36 OUT2P 37 V CCP2P 38 V CCP2P 39 BSP2P 40 V CCA 41 FIL P FIL P V CCA 42 FIL A 43 GND A FIL A GND A 44 IN2 BD5427EFS Technical Note ●Pin Assignment Top View Pin Assignment Diagram ●Outer Dimensions and Inscriptions (MAX 18.85 include BURR) 18.5 ± 0.1 TYPE 23 22 Lot No. 0.8 (Unit: mm) Outer Dimensions and Inscriptions of HTSSOP-A44 Package 2010.05 - Rev.B Technical Note BD5427EFS ●Explanation of Pin Functions (Provided pin voltages are typical values.) No. Symbol Pin voltage Pin description Internal equalizing circuit 40 1 44 IN1 IN2 3.5V ch1 Analog signal input pin ch2 Analog signal input pin 20k 1/44 Input audio signal via a capacitor. 43 6 7, 8 BSP1P VCCP1P - Vcc ch1 positive bootstrap pin Connect a capacitor ch1 positive power system power supply pin 7 ,8 6 9,1 0 9, 10 OUT1P Vcc to 0V 11, 12 GNDP1 0V ch1 positive PWM signal output pin Connect with output LPF. 1 1 ,1 2 ch1 power system GND pin 1 5 ,1 6 13, 14 OUT1N Vcc to 0V ch1 negative PWM signal output pin Connect with output LPF 17 1 3 ,1 4 15, 16 17 VCCP1N BSP1N Vcc - www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. ch1 negative power system power supply pin ch1 negative bootstrap pin Connect a capacitor. 8/15 1 1 ,1 2 2010.05 - Rev.B Technical Note BD5427EFS ●Explanation of Pin Functions - continued No. Symbol Pin voltage Pin description Internal equalizing circuit 40 Warning output pin 18 WARNING H: 5V L: 0V Pin to notify operation warning. H: Under warning L: Normal operation 2k 18 Connect a resister. 43 40 Error output pin 19 ERROR H: 5V L: 0V A pin for notifying operation errors. H: Error L: Normal operation 2k 19 Connect a resister. 43 40 120k Audio mute control pin MUTEX - H: Mute off L: Mute on 80k 20 20 43 2, 3 4, 5 21, 22 N.C. - N.C. pin Nothing is connected with IC internal circuit. 40 Sampling clock signal input/output pin 23 OSC - When using two or more sampling clocks, connect via a capacitor. 23 43 www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 9/15 2010.05 - Rev.B Technical Note BD5427EFS ●Explanation of Pin Functions - continued No. Symbol Pin voltage Pin description Internal equalizing circuit 40 Master/Slave switching pin MS - 120k 24 80k 24 Switching of master/slave functions on a sampling clock signal. H: Slave operation L: Master operation 43 40 Internal PWM sampling clock frequency setting pin ROSC 5.6V 25 Usually the pin is used open. To adjust an internal sampling clock frequency, connect a resister. 32k 25 43 40 Audio muting constant setting pin 26 TM 0 to 5V 26 Connect a capacitor. 43 40 VHOLD 0.68×Vcc Connect a capacitor. To adjust a detecting voltage, connect a resister. 27 390k 27 180k Instantaneous power interruption detecting voltage setting pin 43 www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 10/15 2010.05 - Rev.B Technical Note BD5427EFS ●Explanation of Pin Functions - continued No. Symbol Pin voltage 28 BSP2N - Pin description ch2 negative bootstrap pin Connect a capacitor. Internal equalizing circuit 29,30 28 29, 30 VCCP2N Vcc 31, 32 OUT2N Vcc to 0V ch2 negative power system power supply pin 31,32 ch2 negative PWM signal output pin Connect an output LPF. 33, 34 GNDP2 0V 35, 36 OUT2P Vcc to 0V ch2 power system GND pin 33,34 ch2 positive PWM signal output pin 37,38 Connect an output LPF. 39 37, 38 VCCP2P Vcc ch2 positive power system power supply pin 35,36 ch2 positive bootstrap pin 39 BSP2P Connect a capacitor. 33,34 40 VCCA Vcc Analog system power pin 40 41 FILP Vcc+35 12 PWM system bias pin 41 Connect a capacitor. 43 40 Analog signal system bias pin 42 FILA 3.5V 42 Connect a capacitor. 43 43 GNDA 0V www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. Analog system power supply pin 11/15 2010.05 - Rev.B SP ch1 L9 © 2010 ROHM Co., Ltd. All rights reserved. www.rohm.com Fig. 24 C8 C9 C7 C13 C10 12/15 C15 C17 M ute Control Output DC V ol tage Protection Clock Control Ramp Generator 23 24 C23 25 OPEN 26 27 C26 C27 GN DP CLK I /O GNDD N.C. 22 N.C. Output Short Protection High Temperature Protection Under V ol tage Protection Soft M ute V CCP L31 L35 M A STER SL A VE INPUT ch-2 C31 N.C. 21 N.C. 20 19 ERROR C42 R19 Power-off Detector C29 18 Protections & Logi c 28 W ARNING 17 DRI VER 1N 29 DRI VER 1P 16 DRI VER 2N 30 DRI VER 2P 15 31 C37 M UTE C6 14 32 33 34 35 36 37 38 39 40 41 FIL P V CCA C40 13 12 11 10 PW M 2 C39 9 8 7 N.C. PW M 1 C41 C38 ERROR OU TPUT 5 N.C. N.C. 42 43 FI L A GND A C44 V CCA R18 4 N.C. N.C. N.C. 44 C35 W ARNING OU TPU T 3 N.C. 6 2 N.C. 1 C43 GNDP V CCP C1 GNDA L13 INPU T ch-1 SP ch2 BD5427EFS Technical Note ●Application Circuit Diagram ・Vcc=10V to 16.5V C32 C28 Circuit Diagram of Stereo Operation with 8Ω Load 2010.05 - Rev.B Technical Note BD5427EFS able 1 BOM List of Stereo Operation with 8Ω Load No. Item Part Number Vendor mm inch Rated voltage Tolerance Temperature characteristics Quantity Reference - - - - 1 IC1 IC BD5427EFS 2 C GRM219B31E684KA88D MURATA 2012 0805 0.68µF 25V ±10% ±10% 4 C6, C17, C28, C39 3 C GRM188R11H104KA93 MURATA 1608 0603 0.1µF 50V ±10% ±10% 5 C7, C15, C29, C37, C40 4 C GRM21BB11H104KA01 MURATA 2012 0805 0.1µF 50V ±10% ±10% 4 C9, C13, C31, C35 5 C 25ST225M3216 Rubycon 3225 1210 2.2µF 25V ±20% ±5% 2 C1, C44 6 C 50ST474M3225 Rubycon 3225 1210 0.47µF 50V ±20% ±5% 2 C10, C32 7 C GRM21BB31E335KA75 MURATA 2012 0805 3.3µF 25V ±10% ±10% 1 C27 8 C GRM188B11E104KA MURATA 1608 0603 0.1µF 25V ±10% ±10% 2 C23, C26 9 C GRM21BB11C105KA MURATA 2012 0805 1µF 16V ±10% ±10% 1 C41 10 C GRM21BB31C106KE15 MURATA 2012 0805 10µF 16V ±10% ±10% 1 C42 11 C 25SVPD10M SANYO 6666 2626 10µF 25V ±20% ±25% 3 C8, C38, C43 12 R MCR01MZPF1003 ROHM 1005 0402 100kΩ 50V ±1% ±200ppm/℃ 2 R18, R19 Part Number Vendor Value Tolerance DC Resistance Rated DC Current Quantity 33µH×2 ±20% 52mΩmax. 2.0A max. 2 13 L 7G09B-330M SAGAMI www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. HTSSOP-A44 Value 1 No. Item ROHM Configuration Configuration mm 10×9×10 13/15 Reference L9, L13, L31, L35 2010.05 - Rev.B Technical Note BD5427EFS ●Notes on Usage 1. About absolute maximum ratings If an applied voltage or an operating temperature exceeds an absolute maximum rating, it may cause destruction of a device. A result of destruction, whether it is short mode or open mode, is not predictable. Therefore, provide a physical safety measure such as fuse, against a special mode that may violate conditions of absolute maximum ratings. 2. About power supply line As return of current regenerated by back EMF of output coil happens, take steps such as putting capacitor between power supply and GND as a electric pathway for the regenerated current. Be sure that there is no problem with each property such as emptied capacity at lower temperature regarding electrolytic capacitor to decide capacity value. If the connected power supply does not have sufficient current absorption capacity, regenerative current will cause the voltage on the power supply line to rise, which combined with the product and its peripheral circuitry may exceed the absolute maximum ratings. It is recommended to implement a physical safety measure such as the insertion of a voltage clamp diode between the power supply and GND pins. 3. Potential of GND (11, 12, 33, 34, and 43 pins) Potential of the GND terminal must be the lowest under any operating conditions. 4. About thermal design Perform thermal design with sufficient margins, in consideration of maximum power dissipation Pd under actual operating conditions. This product has an exposed frame on the back of the package, and it is assumed that the frame is used with measures to improve efficiency of heat dissipation. In addition to front surface of board, provide a heat dissipation pattern as widely as possible on the back also. A class-D power amplifier has heat dissipation efficiency far higher than that of conventional analog power amplifier and generates less heat. However, extra attention must be paid in thermal design so that a power dissipation Pdiss should not exceed the maximum power dissipation Pd. Tjmax - Ta Tjmax: Maximum temperature junction = 150[℃] W Pd Maximum power dissipation θ ja Ta: Operating ambient temperature [℃] θja: Package thermal resistance [℃/W] 1 Po: Output power [W] P diss P O 1 W Power dissipation η η: Efficiency 5. About operations in strong electric field Note that the device may malfunction in a strong electric field. 6. Thermal shutdown (TSD) circuit This product is provided with a built-in thermal shutdown circuit. When the thermal shutdown circuit operates, the output transistors are placed under open status. The thermal shutdown circuit is primarily intended to shut down the IC avoiding thermal runaway under abnormal conditions with a chip temperature exceeding Tjmax = 150℃, and is not intended to protect and secure an electrical appliance. Accordingly, do not use this circuit function to protect a customer's electrical appliance. 7. About shorting between pins and installation failure Be careful about direction and displacement of an LSI when installing it onto the board. Faulty installation may destroy the LSI when the device is energized. In addition, a foreign matter getting in between LSI pins, pins and power supply, and pins and GND may cause shorting and destruction of the LSI. 8. About power supply startup and shutdown When starting up a power supply, be sure to place the MUTEX pin (pin 20) at “L” level. When shutting down a power supply also, be sure to place the pin at “L” level. Those processes reduce pop noises generated upon turning on and off the power supply. In addition, all power supply pins must be started up and shut down at the same time. 9. About WARNING output pin (pin 18) and ERROR output pin (pin 19) A WARNING flag is output from the WARNING output pin upon operation of the high-temperature protection function and under-voltage protection function. And an ERROR flag is output from the ERROR output pin upon operation of VCC/GND shorting protection function and speaker DC voltage applying protection function. These flags are the function which the condition of this product is shown in. The use which aimed at the protection except for this product is prohibition. 10. About N.C. pins (pins 2, 3, 4, 5, 21 and 22) The N.C. (Non connection) pins are not connected with an internal circuit. Leave the pins open or connect them to GND. www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 14/15 2010.05 - Rev.B Technical Note BD5427EFS ●Ordering part number B D 5 Part No. 4 2 7 Part No. E F - S Package EFS:HTSSOP-44 E 2 Packaging and forming specification E2: Embossed tape and reel HTSSOP-A44 <Tape and Reel information> 18.5±0.1 (MAX 18.85 include BURR) (6.0) 0.85 0.5±0.15 (5.0) 1 1.0±0.2 23 7.5±0.1 9.5±0.2 44 +6° 4° −4° Tape Embossed carrier tape (with dry pack) Quantity 1500pcs Direction of feed E2 The direction is the 1pin of product is at the upper left when you hold ( reel on the left hand and you pull out the tape on the right hand ) 22 1PIN MARK +0.05 0.17 -0.03 1.0MAX S 0.08±0.05 0.85±0.05 0.08 S 0.8 +0.05 0.37 -0.04 0.08 M 1pin Reel (Unit : mm) www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 15/15 Direction of feed ∗ Order quantity needs to be multiple of the minimum quantity. 2010.05 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A