ZMDI’s ZSSC3026 Sensor Signal Conditioner offers features well suited to consumer applications: Highly integrated CMOS IC developed for correction of resistive bridge sensors and optimized for high-resolution applications, such as mobile altimeter modules Small die size and very low current consumption – well-suited for mobile and consumer applications Digital compensation of individual sensor offset; 1st and 2nd order compensation of sensor gain; digital compensation of 1st and 2nd order temperature gain and offset drift Fully programmable gain amplifier for optimizing sensor signals: gain range 14 to 72 (linear) Flexible, programmable analog front-end design; up to 16-bit scalable, charge-balancing twosegment analog-to-digital converter (ADC); integrated 18-bit calibration math DSP Internal auto-compensated temperature sensor; temperature resolution: <0.003K/LSB Current consumption: 900µA (operating mode); Sleep State current: 50nA (typical) Typical sensor elements can achieve accuracy of better than ±0.10% FSO @ -40 to 110°C Operation temperatures depending on part number: –40°C to +85°C; –40°C to +110°C Costs minimized via one-pass calibration; no external trimming components required Digital output of corrected measurement values via I2C™ (≤3.4MHz) or SPI (≤ 20MHz) interface (I2C™ is a trademark of NXP) Die for wafer bonding, bumped die for Flip Chip, PQFN24 For more information about consumer and mobile uses for the ZSSC3026 and other ZMDI products, view our Global Product Brochure by clicking here Typical ZMDI Consumer Applications In consumer electronics, ZMDI reduces energy consumption by enabling precise sensor measurements through ZMDI’s complete line of low power sensor signal conditioner IC Smart Phone Mobile Navigation Barometric Altitude Measurement Devices Home Appliances Office Equipment Contact ZMDI to inquire about consumer and mobile applications specific to the ZSSC3026 by clicking HERE.