VER : A_1 update : 2015.09.11 AC -DC Medical Power Module MTC30 SERIES 30 Watts KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC Regulated Output and Low Ripple and Noise <0.15W No Load Input Power Isolation Class II CE, CB, UL, cUL Approval 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Single Output ) Max Output Wattage (W) Voltage MTC30-5S 25W (Note 1) Frequency (Hz) Input Output Protection Isolation Environment Physical MTC30-12S 30W MTC30-15S 30W MTC30-24S 30W 90-264 VAC or 120-370 VDC 47-440 Hz Current (Full load) 650 mA max. (115 VAC) / 400 mA max. (230 VAC) Inrush current (<2ms,Cold Start) 30 A max. (115 VAC) / 60 A max. (230 VAC) Leakage Current < 0.1mA / 264 VAC (Touch Current) No Load Input Power (<240 VAC) <0.15W External Fuse (recommend) 3.15 A slow blow type Voltage (V.DC.) 5V Voltage Accuracy ±2% Current (mA) max 5000 Line Regulation (LL-HL) (typ.) ±0.5% Load Regulation (10-100%) (typ.) ±1% 12V 15V 24V 2500 2000 1250 Maximum Capacitive Load (at 230 VAC) 6800uF 1600uF 1200uF 470uF Ripple & Noise (max.) 100mVp-p 150mVp-p 150mVp-p 240mVp-p Efficiency (at 230 VAC) 84% 89% 86% 86% Hold-up Time 10 ms min. Over Power Protection Hiccup technique, auto-recovery Over Voltage Protection Zener diode clamp (Note 2) Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Input-Output (V.AC) 4000V Operating Temperature -40°C…+80°C Storage Temperature -40°C…+90°C Temperature Coefficient ±0.05%/°C Altitude During Operation 5000m Humidity up to 95% RH MTBF >250,000 h @ 25°C (MIL-HDBK-217F) Atmospheric Pressure 70 kPa to 106 kPa Dimension (L x W x H) 2.52 x 1.77 x 0.92 Inches Case Material Plastic resin (flammability to UL 94V-0) Weight 130 g Cooling Method Free air convection http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 ( 64.0 x 45.0 x 23.5 mm ) Tolerance 0.5 mm -1- VER : A_1 update : 2015.09.11 AC -DC Medical Power Module MTC30 SERIES 30 Watts ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. Safety ( Single Output ) Approval Conducted and radiated EMI EMC MTC30-5S MTC30-12S MTC30-15S MTC30-24S cUL / UL Standard: UL 60950-1, CAN/CSA C22.2 No. 60950-1-07 ANSI/AAMI ES60601-1 (2005 + C1:09 + A2:10), CAN/CSA-C22.2 No. 60601-1 (2008), 2 x MOPP CB Standard: IEC 60950-1:2005 (2nd Edition) + Am 1:2009 + Am 2:2013 IEC 60601-1:2005 (3rd Edition) + CORR. 1 (2006) + CORR. 2 (2007) + AM1 (2012) or IEC 60601-1 (2012 reprint), 2 x MOPP EN55011 class B ESD EN61000-4-2 air ± 8kV , Contact ± 4kV Radiated Immunity EN61000-4-3 10V/m Fast Transient EN61000-4-4 ± 2kV Surge EN61000-4-5 ±1kV Conducted Immunity EN61000-4-6 10Vrms PFMF EN61000-4-8 30A/m Dips EN61000-4-11 30% 10ms Interruption EN61000-4-11 >95% 5000ms NOTE 1. This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 3. Safety approvals cover frequency 47-63 Hz. 4. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 5. It's recommended to add Varistor 14S471K at L / N input side in parallel. 6. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw MECHANICAL DIMENSION ( Top View ) http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 PIN# Single 1 AC IN (N) 2 AC IN (L) 3 -DC OUT 4 NO PIN 5 +DC OUT -2- VER : A_1 update : 2015.09.11 AC -DC Medical Power Module MTC30 SERIES 30 Watts DERATING BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -3-