High Performance Class-D Speaker Amplifier Series 7W+7W Class-D Speaker Amplifier for Analog Input No.09075EAT07 BD5427MUV ●Overview BD5427MUV is a 7W + 7W stereo class-D power amplifier IC, developed for space-saving and low heat-generation applications such as low-profile TV sets. The IC employs state-of-the-art Bipolar, CMOS, and DMOS (BCD) process technology that eliminates turn-on resistance in the output power stage and internal loss due to line resistances up to an ultimate level. With this technology, the IC has achieved high efficiency of 80% (7W + 7W output with 8Ω load), which is the top class in the industry. The IC, in addition, employs a compact back-surface heat radiation type power package to achieve low power consumption and low heat generation and eliminates necessity of installing an external radiator, up to a total output of 14W. This product satisfies both needs for drastic downsizing, low-profile structures and powerful, high-quality playback of the sound system. ●Features 1) A high efficiency of 80% (7W + 7W output with 8Ω load), which is the highest grade in the industry and low heat-generation. 2) Driving a lowest rating load of 6Ω is allowed. 3) Pop noise upon turning power on/off and power interruption has been reduced. 4) High-quality audio muting is implemented by soft-switching technology. 5) High-reliability design provided with built-in protection circuits against high temperatures, against VCC shorting and GND shorting, against reduced-voltage, and against applying DC voltage to speaker. 6) A master/slave function allowing synchronization of multiple devices reduces beat noises. 7) Adjustment of internal PWM sampling clock frequencies (250kHz to 400kHz) allows easy protective measures against unwanted radio emission to AM radio band. 8) A compact back-surface heat radiation type power package is employed. VQFN048V7070 7.0mm × 7.0mm × 1.0mm, pitch 0.5mm www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 1/15 2009.06 - Rev.A Technical Note BD5427MUV ●Absolute Maximum Ratings A circuit must be designed and evaluated not to exceed absolute maximum rating in any cases and even momentarily, to prevent reduction in functional performances and thermal destruction of a semiconductor product and secure useful life and reliability. The following values assume Ta =25℃. For latest values, refer to delivery specifications. Item Symbol Supply voltage Power dissipation Rating VCC Pd Unit Conditions +20 V Pin 2, 14, 15, 22, 23, 38, 39, 46, 47 (Note 1, 2) 3.28 W (Note 3) 4.8 W (Note 4) Input voltage for signal pin VIN -0.2 ~ +7.2 V Pin 6, 7 (Note 1) Input voltage for control pin VCONT -0.2 ~ Vcc+0.2 V Pin 28, 32 (Note 1) Input voltage for clock pin VOSC -0.2 ~ +7.2 V Pin 31 (Note 1) Operating temperature range Topr -40 ~ +85 ℃ Storage temperature range Tstg -55 ~ +150 ℃ Maximum junction temperature Tjmax +150 ℃ (Note 1) A voltage that can be applied with reference to GND (pins 5, 18, 19, 42, and 43) (Note 2) Pd and Tjmax=150℃ must not be exceeded. (Note 3) 114.3mm × 76.2mm × 1.6mm FR4 2-layer glass epoxy board (Copper Area 5505mm2) installed. If used under Ta=25℃ or higher, reduce 26.2mW for increase of every 1℃. The board is provided with thermal via. (Note 4) 114.3mm × 76.2mm × 1.6mm FR4 4-layer glass epoxy board (Copper Area 5505mm2) installed. If used under Ta=25℃ or higher, reduce 38.4mW for increase of every 1℃. The board is provided with thermal via. ●Operating Conditions The following values assume Ta =25℃. Check for latest values in delivery specifications. Symbol Rating Unit Item Conditions Supply voltage VCC +10~+16.5 V Pin 2, 14, 15, 22, 23, 38, 39, 46, 47 Load resistance RL 6 ~ 16 Ω (Note 5) (Note 5) Pd should not be exceeded. ●Electrical Characteristics Except otherwise specified Ta = 25℃, VCC = 12V, fIN = 1kHz, Rg = 0Ω, RL = 8Ω、MUTEX="H", MS="L" For latest values, refer to delivery specifications. Representative Symbol Unit Conditions Item value Whole circuit Circuit current 1 (Sampling mode) ICC1 25 mA With no signal Circuit current 2 (Muting mode) ICC2 10 mA MUTEX = “L” “H” level input voltage VIH 2.3~12 V MUTEX, MS “L” level input voltage VIL 0~0.8 V MUTEX, MS GV 28 dB PO = 1W Control circuit Audio circuit Voltage gain Maximum output power (Note 6) PO 7 W THD+N = 10% Total harmonic distortion (Note 6) THD 0.1 % PO = 1W, BW=20Hz~20kHz CT 85 dB PO = 1W, Rg = 0Ω, BW = IHF-A Output noise voltage (Sampling mode) VNO 80 µVrms Rg = 0Ω, BW = IHF-A Residual noise voltage (Muting mode) VNOM 1 µVrms Rg = 0Ω, BW = IHF-A, MUTEX = “L” Internal sampling clock frequency FOSC 250 kHz Crosstalk MS = “L” (In master operation) (Note 6) The rated values of items above indicate average performances of the device, which largely depend on circuit layouts, components, and power supplies. The reference values are those applicable to the device and components directly installed on a board specified by us. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 2/15 2009.06 - Rev.A Technical Note BD5427MUV ●Electrical characteristic curves (Reference data) (1) Under Stereo Operation(RL=8Ω) 100 6kHz 1 100Hz 0.01 0.001 0.01 1 0.1 1kHz 0.1 Vcc=12V RL=8Ω Po=1W BW=20~20kHz 10 THD+N (%) 10 THD+N (%) 100 Vcc=12V RL=8Ω BW=20~20kHz 0.1 1 OUTPUT POWER (W) 0.01 10 10 100 10000 100000 Fig. 2 THD+N - Frequency 0 40 35 Vcc=12V RL=8Ω Po=1W BW=20~20kHz -20 25 CROSSTALK (dB) 30 Vcc=12V RL=8Ω Po=1W L=33µH C=0.47µF Cg=0.1µF 20 15 10 5 0 -40 -60 -80 -100 10 100 1000 10000 10 100000 100 Fig. 3 Voltage gain - Frequency Fig. 4 20 0 -40 OUTPUT POWER (W) Vcc=12V RL=8Ω fin=1kHz BW=20~20kHz -20 -60 -80 -100 0.001 0.01 0.1 1 10 100 Fig. 5 Crosstalk - Output power www.rohm.com 10000 100000 Crosstalk - Frequency RL=8Ω fin=1kHz THD=10% 15 10 5 0 8 OUTPUT POWER (W) © 2009 ROHM Co., Ltd. All rights reserved. 1000 FREQUENCY (Hz) FREQUENCY (Hz) CROSSTALK (dB) 1000 FREQUENCY (Hz) Fig. 1 THD+N - Output power VOLTAGE GAIN (dB) 100 10 12 14 VCC (V) 16 18 Fig. 6 Output power - Power supply voltage 3/15 2009.06 - Rev.A Technical Note BD5427MUV 100 90 80 70 60 50 40 30 20 10 0 Vcc=10V RL=8Ω fin=1kHz 0 5 10 OUTPUT POWER (W/ch) Fig. 7 Efficiency - Output power 100 90 80 70 60 50 40 30 20 10 0 100 90 80 70 60 50 40 30 20 10 0 15 Vcc=12V RL=8Ω fin=1kHz 0 5 10 OUTPUT POWER (W/ch) Fig. 8 Efficiency - Output power Vcc=16.5V 2 Vcc=12V Vcc=10V 1 Vcc=16.5V RL=8Ω fin=1kHz RL=8Ω fin=1kHz 0 0 5 10 0 15 5 Fig. 9 Efficiency - Output power 100 90 80 70 60 50 40 30 20 10 0 10 15 20 25 30 35 40 TOTAL OUTPUT POWER (W) OUTPUT POWER (W/ch) Fig. 10 Current consumption - Output power 0 RL=8Ω 無信号時 Without signal Vcc=12V RL=8Ω Without signal 無信号時 BW=20~20kHz -20 NOISE FFT (dBV) ICC (mA) 15 3 ICC (A) EFFICIENCY (%) EFFICIENCY (%) EFFICIENCY (%) ●Electrical characteristic curves (Reference data) – Continued Sampling Mute -40 -60 -80 -100 -120 -140 8 10 12 14 VCC (V) 16 10 18 www.rohm.com 1000 10000 100000 FREQUENCY (Hz) Fig. 11 Current consumption - Power supply voltage © 2009 ROHM Co., Ltd. All rights reserved. 100 4/15 Fig. 12 FFT of Output Noise Voltage 2009.06 - Rev.A Technical Note BD5427MUV ●Electrical characteristic curves (Reference data) – Continued MUTEX Pin 28 10V/div TM Pin 34 5V/div MUTEX Vcc=12V Pin 28 RL =8 Ω Po=500m W fin=500Hz TM Pin 34 2V/div Speaker output 10V/div 5V/div Vcc=12V RL =8 Ω Po=500mW fin=500Hz 2V/div Speaker output 10msec/div 10msec/div Fig. 13 Wave form when Releasing Soft-mute Fig. 14 Wave form when Activating Soft-mute VCCA VCCA VHOLD Pin 35 5V/div VHOLD Pin 35 TM Pin 34 5V/div Speaker output 2V/div 5V/div 2V/div 2msec/div Fig. 15 Wave form on Instantaneous Power Interruption (20msec / div) www.rohm.com Vcc=12V RL =8 Ω Po=500mW fin=3kHz Speaker output 20msec/div © 2009 ROHM Co., Ltd. All rights reserved. 5V/div Vcc=12V RL =8 Ω Po=500m W TM fin=3kHz Pin 34 5/15 Fig. 16 Wave form on Instantaneous Power Interruption (2msec / div) 2009.06 - Rev.A Technical Note BD5427MUV ●Electrical characteristic curves (Reference data) (2) Under Stereo Operation(RL=6Ω) OUTPUT POWER (W) 25 RL=6Ω fin=1kHz THD=10% 20 15 10 5 0 8 10 12 14 VCC (V) 16 18 Vcc=10V RL=6Ω fin=1kHz 0 5 10 15 OUTPUT POWER (W/ch) Fig. 18 EFFICIENCY (%) EFFICIENCY (%) 100 90 80 70 60 50 40 30 20 10 0 100 90 80 70 60 50 40 30 20 10 0 20 Vcc=12V RL=6Ω fin=1kHz 0 5 10 15 OUTPUT POWER (W/ch) Efficiency - Output power 100 90 80 70 60 50 40 30 20 10 0 Fig. 19 20 Efficiency - Output power 4 3 Vcc=16.5V Vcc=12V ICC (A) EFFICIENCY (%) Fig. 17 Output power - Power supply voltage Vcc=16.5V RL=6Ω fin=1kHz 2 Vcc=10V RL=6Ω fin=1kHz 1 0 0 5 10 15 OUTPUT POWER (W/ch) Fig. 20 20 0 5 10 15 20 25 30 35 40 TOTAL OUTPUT POWER (W) Efficiency - Output power Fig. 21 Current consumption - Output power Dotted lines of the graphs indicate continuous output power to be obtained on musical signal source or by installing additional heat sinks. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 6/15 2009.06 - Rev.A Technical Note BD5427MUV ●Pin Assignment IN1 IN2 GNDA FILA FILP VCCA BSP2P 6 5 4 3 2 1 N.C. 13 N.C. FILP Power Limit FILA 10 VCCA N.C. 7 N.C. 11 GNDA N.C. 8 N.C. N.C. 9 N.C. N.C. 12 N.C. BSP1P Top View N.C. 48 N.C. VCCP1P 14 VCCP1P 15 OUT1P 16 OUT1P 17 GNDP1 18 43 GNDP2 GNDP1 19 42 GNDP2 OUT1N 20 OUT1N 21 VCCP1N 22 VCCP1N 23 46 VCCP2P PWM1 PWM2 DRIVER 1P 45 OUT2P DRIVER 2P DRIVER 1N 44 OUT2P 41 OUT2N DRIVER 2N Protections & Logic 40 OUT2N Under Voltage Protection High Temperature Protection 39 VCCP2N Output Short Protection Output DC Voltage Protection Ramp Generator SOFT MUTE Power-Off Detector 28 29 30 31 32 33 34 35 36 ERROR MUTEX N.C. N.C. OSC MS ROSC TM VHOLD BSP2N Mute Control Clock Control 27 24 N.C. ERROR 26 WARNING 25 WARNING 38 VCCP2N BSP1N N.C. 47 VCCP2P N.C. 37 N.C. N.C. N.C. Fig. 22 Pin Assignment Diagram ●Outer Dimensions and Inscriptions Type BD5427 Lot No. Fig. 23 Outer Dimensions and Inscriptions of VQFN048V7070 Package www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 7/15 2009.06 - Rev.A Technical Note BD5427MUV ●Explanation of Pin Functions (Provided pin voltages are typical values.) No. Symbol Pin voltage 2 VCCA Vcc Internal equalizing circuit Pin description Analog system power pin 2 3 FILP Vcc+35 12 PWM system bias pin 3 Connect a capacitor. 5 2 Analog signal system bias pin 4 FILA 3.5V 4 Connect a capacitor. 5 5 GNDA 0V Analog system GND pin 2 6 7 IN2 IN1 3.5V ch2 Analog signal input pin ch1 Analog signal input pin 6/7 20k Input audio signal via a capacitor. 5 www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 8/15 2009.06 - Rev.A Technical Note BD5427MUV ●Explanation of Pin Functions - Continued No. Symbol Pin voltage 12 BSP1P - Internal equalizing circuit Pin description 1 4,1 5 ch1 positive bootstrap pin Connect a capacitor. 12 14, 15 VCCP1P Vcc 16, 17 OUT1P Vcc~0V ch1 positive power system power supply pin 1 6,1 7 ch1 positive PWM signal output pin Connect with output LPF. 1 8 ,1 9 18, 19 GNDP1 0V ch1 power system GND pin 2 2 ,2 3 20, 21 OUT1N Vcc~0V ch1 negative PWM signal output pin Connect with output LPF. 25 2 0 ,2 1 22, 23 VCCP1N Vcc 25 BSP1N - ch1 negative power system power supply pin ch1 negative bootstrap pin Connect a capacitor 1 8 ,1 9 2 Warning output pin 26 WARNING H: 5V L: 0V Pin to notify operation warning. H: Under warning L: Normal operation 2k 26 Connect a resister. 5 2 Error output pin 27 ERROR H: 5V L: 0V A pin for notifying operation errors. H: Error L: Normal operation 2k 27 Connect a resister. 5 www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 9/15 2009.06 - Rev.A Technical Note BD5427MUV ●Explanation of Pin Functions - Continued No. Symbol Pin voltage Internal equalizing circuit Pin description 2 Audio mute control pin MUTEX - H: Mute off L: Mute on 80k 28 120k 28 5 8, 9 10, 11 13, 24 29, 30 37, 48 N.C. - N.C. pin Nothing is connected with IC internal circuit. Sampling clock signal input/output pin 31 OSC - When using two or more sampling clocks, connect via a capacitor. 2 Master/Slave switching pin MS - 120k Switching of master/slave functions on a sampling clock signal. H: Slave operation L: Master operation 32 80k 32 5 2 Internal PWM sampling clock frequency setting pin 33 ROSC 5.6V 20k 6/7 Usually the pin is used open. To adjust an internal sampling clock frequency, connect a resister. 5 www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 10/15 2009.06 - Rev.A Technical Note BD5427MUV ●Explanation of Pin Functions - Continued No. Symbol Pin voltage Pin description Internal equalizing circuit 2 Audio muting constant setting pin 34 TM 34 0~5V Connect a capacitor. 5 180k 2 Instantaneous power interruption detecting voltage setting pin VHOLD 0.68×Vcc 35 Connect a capacitor. To adjust a detecting voltage, connect a resister. 390k 35 5 36 BSP2N - ch2 negative bootstrap pin Connect a capacitor. 3 8 ,3 9 36 38, 39 VCCP2N Vcc 40, 41 OUT2N Vcc~0V ch2 negative power system power supply pin 4 0 ,4 1 ch2 negative PWM signal output pin Connect an output LPF. 4 2 ,4 3 42, 43 GNDP2 0V cch2 power system GND pin 4 6 ,4 7 44, 45 OUT2P Vcc~0V ch2 positive PWM signal output pin Connect an output LPF. 1 4 4 ,4 5 46, 47 VCCP2P Vcc 1 BSP2P - www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. ch2 positive power system power supply pin ch2 positive bootstrap pin Connect a capacitor. 11/15 4 2 ,4 3 2009.06 - Rev.A Technical Note BD5427MUV ●Application Circuit Diagram VCCP1 C12 0.68μF N.C. V CC A C3 1μF 3 2 1 V CC A 4 0.1μF C5 + 2.2μF C2 10μF 5 FIL P N.C. GND A N.C. 6 C4 10μF N.C. 7 FIL A 8 SP INPUT 2 ch N.C. 9 GNDA N.C. 10 C6 N.C. 11 C7 N.C. 12 N.C. 2.2μF SP INPUT 1 ch ・Vcc=10V~16.5V 13 N.C. N.C. 48 14 C15 10μF + C17 0.47μF SP 1 ch (8 Ω ) GNDP 1 L16 33μH C14 0.1μF 15 PWM 1 C22 0.1μF DRIVER 2P 44 43 19 42 DRIVER 1N 40 Under Voltage Protection High Temperature Protection 22 C44 0.1μF C40 0.1μF C38 0.1μF Power-Off Detector 34 35 + C39 10μF C41 0.47μF GNDP 2 SP 2 ch (8 Ω ) 33μH L40 N.C. 37 N.C. 36 3.3μF C35 C34 C36 0.68μF GNDD SL A VE M AS TER 0.1μF SOFT MUTE 33 OPEN 32 38 Ramp Generator Clo ck Con t rol C AREER I / O R27 100kΩ 31 0.1μF 30 C31 N.C. 29 N.C. N.C. N.C. ERROR 28 MUTEX WARNING OUT PUT GNDD 27 GNDD 26 R26 100kΩ 25 ERROR OUTPUT N.C. Mute Control 23 N.C. 24 VCCP2 39 Output Short Protection Output DC Voltage Protection WARNING C25 0.68μF L44 33μH 41 DRIVER 2N Protections & Logic 21 C46 0.1μF 45 18 20 33μH L20 46 PWM 2 DRIVER 1P 17 C20 0.1μF C1 0.68μF 47 16 C16 0.1μF N.C. Fig. 24 Circuit Diagram of Stereo Operation with 8Ω Load www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 12/15 2009.06 - Rev.A Technical Note BD5427MUV Table 1 BOM List of Stereo Operation with 8Ω Load Configuration No. Item Part Number Vendor mm ROHM Value Rated voltage Tolerance Temperature characteristics Quantity - - - - 1 inch VQFN048V7070 Reference 1 IC BD5427MUV 2 C GRM219B31E684KA88 MURATA 2012 0805 0.68µF 25V ±10% ±10% 4 C1, C12, C25, C36 3 C GRM188R11H104KA93 MURATA 1608 0603 0.1µF 50V ±15% ±15% 5 C5, C14, C22, C38, C46 4 C GRM21BB11H104KA01 MURATA 2012 0805 0.1µF 50V ±10% ±10% 4 C16, C20, C40, C44 5 C 25ST225M3225 Rubycon 3225 1210 2.2µF 25V ±20% ±5% 2 C6, C7 6 C 50ST474M3225 Rubycon 3225 1210 0.47µF 50V ±20% ±5% 2 C17, C41 7 C GRM21BB31E335KA75 MURATA 2012 0805 3.3µF 25V ±10% ±10% 1 C35 8 C GRM188B11E104KA01 MURATA 1608 0603 0.1µF 25V ±10% ±10% 2 C31, C34 9 C GRM21BB11C105KA01 MURATA 2012 0805 1µF 16V ±10% ±10% 1 C3 10 C GRM21BB31C106KE15 MURATA 2012 0805 10µF 16V ±10% ±10% 1 C4 11 C 25SVPD10M SANYO 6666 2626 10µF 25V ±20% ±25% 3 C2, C15, C39 12 R MCR01MZPF1003 ROHM 1005 0402 100kΩ 50V ±1% ±200ppm/℃ 2 R26, R27 No. Item Part Number Vendor Value Tolerance DC Resistance Rated DC Current Quantity 13 L 33µH×2 ±20% 52mΩmax. 2.0A max. 2 Configuration 7G09B-330M SAGAMI www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. mm 10×9×10 13/15 IC1 Reference L16, L20, L40, L44 2009.06 - Rev.A Technical Note BD5427MUV ●Ordering part number 1. About absolute maximum ratings If an applied voltage or an operating temperature exceeds an absolute maximum rating, it may cause destruction of a device. A result of destruction, whether it is short mode or open mode, is not predictable. Therefore, provide a physical safety measure such as fuse, against a special mode that may violate conditions of absolute maximum ratings. 2. About power supply line As return of current regenerated by back EMF of output coil happens, take steps such as putting capacitor between power supply and GND as a electric pathway for the regenerated current. Be sure that there is no problem with each property such as emptied capacity at lower temperature regarding electrolytic capacitor to decide capacity value. If the connected power supply does not have sufficient current absorption capacity, regenerative current will cause the voltage on the power supply line to rise, which combined with the product and its peripheral circuitry may exceed the absolute maximum ratings. It is recommended to implement a physical safety measure such as the insertion of a voltage clamp diode between the power supply and GND pins. 3. Potential of GND (5, 18, 39, 42, and 43 pins) Potential of the GND terminal must be the lowest under any operating conditions. 4. About thermal design Perform thermal design with sufficient margins, in consideration of maximum power dissipation Pd under actual operating conditions. This product has an exposed frame on the back of the package, and it is assumed that the frame is used with measures to improve efficiency of heat dissipation. In addition to front surface of board, provide a heat dissipation pattern as widely as possible on the back also. A class-D power amplifier has heat dissipation efficiency far higher than that of conventional analog power amplifier and generates less heat. However, extra attention must be paid in thermal design so that a power dissipation Pdiss should not exceed the maximum power dissipation Pd. T jmax - Ta Tjmax: Maximum temperature junction = 150[℃] Pd 〔W〕 Maximum power dissipation Ta: Operating ambient temperature [℃] θja θja: Package thermal resistance [℃/W] 1 Po: Output power [W] diss O P P 1 〔W〕 Power dissipation η η: Efficiency 5. About operations in strong electric field Note that the device may malfunction in a strong electric field. 6. Thermal shutdown (TSD) circuit This product is provided with a built-in thermal shutdown circuit. When the thermal shutdown circuit operates, the output transistors are placed under open status. The thermal shutdown circuit is primarily intended to shut down the IC avoiding thermal runaway under abnormal conditions with a chip temperature exceeding Tjmax = 150℃, and is not intended to protect and secure an electrical appliance. Accordingly, do not use this circuit function to protect a customer's electrical appliance. 7. About shorting between pins and installation failure Be careful about direction and displacement of an LSI when installing it onto the board. Faulty installation may destroy the LSI when the device is energized. In addition, a foreign matter getting in between LSI pins, pins and power supply, and pins and GND may cause shorting and destruction of the LSI. 8. About power supply startup and shutdown When starting up a power supply, be sure to place the MUTEX pin (pin 28) at “L” level. When shutting down a power supply also, be sure to place the pin at “L” level. Those processes reduce pop noises generated upon turning on and off the power supply. In addition, all power supply pins must be started up and shut down at the same time. 9. About WARNING output pin (pin 26) and ERROR output pin (pin 27) A WARNING flag is output from the WARNING output pin upon operation of the high-temperature protection function and under-voltage protection function. And an ERROR flag is output from the ERROR output pin upon operation of VCC/GND shorting protection function and speaker DC voltage applying protection function. These flags are the function which the condition of this product is shown in. The use which aimed at the protection except for this product is prohibition. 10. About N.C. pins (pins 8, 9, 10, 11, 13, 24, 29, 30, 37, and 48) The N.C. (Non connection) pins are not connected with an internal circuit. Leave the pins open or connect them to GND. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 14/15 2009.06 - Rev.A Technical Note BD5427MUV ●Ordering part number B D 5 Part No BD. 4 2 7 M Part No. 5427 U V Package MUV: VQFN048V7070 - E 2 Packaging and forming specification E2: Embossed tape and reel VQFN048V7070 <Tape and Reel information> 7.0±0.1 7.0 ± 0.1 1.0MAX 4.7 ± 0.1 1 12 1500pcs E2 The direction is the 1pin of product is at the upper left when you hold ) (0.22) ( reel on the left hand and you pull out the tape on the right hand 13 4.7±0.1 0.4±0.1 48 +0.03 0.02 -0.02 S C0.2 Embossed carrier tape Quantity Direction of feed 1PIN MARK 0.08 S Tape 37 24 36 0.75 0.5 25 +0.05 0.25 -0.04 1pin (Unit : mm) www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. Reel 15/15 Direction of feed ∗ Order quantity needs to be multiple of the minimum quantity. 2009.06 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. R0039A