HBL2X1N Bluetooth V4.0 BLE Module Data Book Bluetooth BLE Module HBL2X1N Data Book www.hanamicron.co.kr Rev1.0 March . 2015 HBL2X1N Bluetooth V4.0 BLE Module Data Book Data Book List of contents 1 General 1.1 1.2 1.3 1.4 1.5 1.6 2 Overview Features Application Pin Configuration & Outline Device Terminal Functions Package Dimensions Characteristics 2.1 Electrical Characteristics 2.2 Input / Output Terminal Characteristics 2.3 Radio Characteristics 3 Terminal Descriptions 3.1 UART Interface 4 Application Schematic www.hanamicron.co.kr 2 page / 11 pages HBL2X1N Bluetooth V4.0 BLE Module Data Book 1. General 1.1 Overview This specification covers Bluetooth module (class-2) which complies with Bluetooth specification version 4.0 BLE and integrates RF & Baseband controller in small package. This Module has deployed CSR’s uEnergy CSR1010 chipset. All detailed specification including pin outs and electrical specification may be changed without notice. CSR1010 HBL2X1N XTAL 16MHz XTAL 32.768 MHz PADS 3.3V UART PIO SPI E2PROM 512Kb VDD 3.3V www.hanamicron.co.kr 3 page / 11 pages HBL2X1N Bluetooth V4.0 BLE Module Data Book 1.2 Features 128KB memory 64KB RAM and 64KB ROM Bluetooth v4.0 specification 7.5dBm Bluetooth low energy maximum transmit output power -92.5dBm Bluetooth low energy receiver sensitivity Support for Bluetooth v4.0 specification host stack including ATT, GATT, SMP, L2CAP, GAP RSSI monitoring for proximity applications 32kHz and 16MHz crystal or system clock Programmable general purpose PIO controller 10-bit ADC 11 digital PIOs 3 analogue AIOs UART Debug SPI 4 PWM modules Wake-up interrupt and watchdog timer Operating temperature range (-20℃~70℃) Supply voltage range (V3.0 ~ V3.3) Module Size (18.5mm x 13.0mm x 2.0mm) 1.3 Application HID : Keyboard, Mouse, Remote controls Sport and fitness sensors products Health sensors products Smart Home products Mobile phone accessories www.hanamicron.co.kr 4 page / 11 pages HBL2X1N Bluetooth V4.0 BLE Module Data Book SPI_SEL PADS VDD GND GND WAKE GND GND 1.4 Pin Configuration & Outline ANT 23 22 21 20 19 18 17 16 TOP GND AIO1 6 7 8 PIO3 AIO2 5 PIO11 14 PIO10 13 PIO9 12 SPI_MISO 11 SPI_MOSI 10 SPI_CS# 9 SPI_CLK PIO4 GND 4 UART_RX 3 AIO0 2 UART_TX 1 15 HBL2X1N Pin Configuration 13.0 Crystal 132.768kHz E2PROM 512Kb ANT CSR1010 Crystal 16MHz 18.5 HBL2X1N Outline www.hanamicron.co.kr 5 page / 11 pages HBL2X1N Bluetooth V4.0 BLE Module Data Book 1.5 Device Terminal Functions Function PIO Port Pin Name AIO[0] 4 AIO[1] 3 AIO[2] 2 PIO[3] 7 PIO[4] 8 PIO[9] 13 PIO[10] 14 PIO[11] 15 UART_TX / UART Port programmable I/O or UART RX SPI_CLK / PIO[5] 9 programmable I/O or debug SPI _CLK Selected by SPI_SEL SPI_CS# / PIO[6] 10 SPI_MOSI / programmable I/O or debug SPI_CSB Selected by SPI_SEL 11 programmable I/O or debug SPI _MOSI Selected by SPI_SEL 12 programmable I/O or debug SPI _MISO Selected by SPI_SEL SPI_SEL 16 Selects SPI debug on PIO[8:5] WAKE 21 VDD 19 Battery input and regulator enable (active high) PADS 17 Positive supply for all digital I/O ports PIO[11:0] GND 1,18,20,22,23 Ground GND Exposed pad Ground exposed pad PIO[8] WAKE Port Programmable Input / Output line 6 UART_RX / SPI_MISO / Debug Analogue programmable Input / Output line programmable I/O or UART TX PIO[7] Test & Description 5 PIO[0] PIO[1] SPI Port Pin No Input to wake CSR1010QFN form hibernate or dormant. POWER GND www.hanamicron.co.kr 6 page / 11 pages HBL2X1N Bluetooth V4.0 BLE Module Data Book 2.0 1.6 Package Dimensions 0.8 2.0 www.hanamicron.co.kr 7 page / 11 pages HBL2X1N Bluetooth V4.0 BLE Module Data Book 2 Characteristics 2.1 Electrical Characteristics Absolute Maximum Ratings Rating Minimum Maximum Storage temperature -40℃ 85℃ Supply voltage : VCC -1.8 3.6 VSS-0.4V VCC+0.4V Other terminal voltages Recommended Operating Conditions Operating Conditions Minimum Maximum -20℃ 70℃ VDD 1.8V 3.6V PADS 1.8V 3.6V Operating temperature range Supply voltage range 2.2 Input / Output Terminal Characteristics DIGITAL Terminals Input Voltage Levels Min Typ Max Unit VIL Input logic level low -0.4 - 0.3 x PADS V VHI Input logic level high 0.7 x PADS - PADS+0.4 V - - 25 ns T r / Tf Output Voltage Levels Min Typ VOL Output logic level low, IOL =4.0mA - - 0.4 V 0.7 x PADS - - V - - 5 ns VOH Output logic level high, T r / Tf Max Unit www.hanamicron.co.kr 8 page / 11 pages HBL2X1N Bluetooth V4.0 BLE Module Data Book 2.3 RF Characteristics Transmitter Specification Condition Min Typ Max Unit Output power Normal - 7.5 - dBm Frequency range Normal 2402 2480 MHz 20dB bandwidth for modulated carrier Normal 926 930 KHz Adjacent channel transmit power ±2MHz -28 -20 dBm ±3MHz -32 -22 >3MHz <-50 -27 275 Δ f1avg 225 258 Δ f2max 185 197 Δ f2avg / Δf1avg 0.8 0.86 - Initial carrier frequency tolerance Normal -35 5 35 KHz Carrier frequency Drift Normal - 7 50 kHz Condition Min Typ Max Sensitivity at 30.8% PER for 2402 - -92 -88 All basic rate packet types 2441 - -92.5 -88.5 2480 - -92.5 -88.5 2.426 50 50 65.4 Maximum receiver signal at 30.8% PER - -10 >-10 - dBm C/I co-channel - - 6 21 dBm Spurious output level - Maximum level of intermodulation - Modulation Characteristics KHz KHz % Receiver Specification Reported PER during PER Report Unit dBm % integrity test -50 154 dBm/Hz -33 dBm interferers www.hanamicron.co.kr 9 page / 11 pages HBL2X1N Bluetooth V4.0 BLE Module Data Book 3 Terminal Description 3.1 UART Interface Parameter Possible value Minimum Baud Rate 1200 baud (≤2% Error) 9600 baud (≤1% Error) Maximum Parity Number of Stop Bits Bits per channel 2M baud (≤1% Error) None, Odd or Even 1 or 2 8 www.hanamicron.co.kr 10 page / 11 pages HBL2X1N Bluetooth V4.0 BLE Module Data Book 4 Application Schematic www.hanamicron.co.kr 11 page / 11 pages