T PL IA N † Ro HS CO M Dual-Line Toroid Inductors Special Features • Dual winding • Low radiation • High current capacity • High inductance • Dielectric strength 1000 Vrms • Mounted on UL 94V-0 rated header (optional) • Fixed pins for easy PCB insertion • Operating temperature -55 to +105 °C † RoHS Directive 2002/95/EC Jan 27, 2003 including Annex. How to Order 7001 - ___ RC Model Configuration Blank = With mounting header 1 = Without mounting header (with vertical coil, 2-inch self-lead length, non-tinned) RoHS Compliant Part Number L (μH) ±15 % @ 1 KHz Idc (A) L (μH) ±15 % @ I rated 7001-RC 7002-RC 7003-RC 7004-RC 7005-RC 7006-RC 7007-RC 7008-RC 7009-RC 7010-RC 7011-RC 7012-RC 7013-RC 7014-RC 7015-RC 7016-RC 7017-RC 7018-RC 7019-RC 7020-RC 7021-RC 7022-RC 7023-RC 7024-RC 7025-RC 2.5 6.0 31.25 68.75 112.5 6.25 18.75 100 200 250 12.5 37.5 175 312.5 400 31.25 125 275 562.5 1125 62.5 225 450 1000 2000 11.0 5.50 2.75 2.00 1.50 9.00 5.00 2.25 1.75 1.50 9.50 4.75 2.25 1.75 1.50 7.75 4.00 2.50 1.75 1.25 8.00 3.75 2.50 1.75 1.00 1.25 3.0 17.5 37.5 62.5 3.75 10 56.25 118.75 143.75 6.25 21.25 100 187.5 237.5 16.25 68.75 162.5 281.25 562.5 31.75 125 250 525 1125 7000 Series DCR Dim. Ω A Max. Max. 0.004 0.007 0.060 0.120 0.245 0.006 0.020 0.165 0.320 0.470 0.006 0.023 0.210 0.430 0.640 0.016 0.075 0.165 0.460 1.320 0.021 0.088 0.240 0.580 1.670 0.875 0.875 0.875 0.875 0.875 1.125 1.125 1.125 1.125 1.125 1.25 1.25 1.25 1.25 1.25 1.812 1.812 1.812 1.812 1.812 2.125 2.125 2.125 2.125 2.125 Dim. B Max. Dim. C ±0.015 Dim. D ±0.015 Dim. E Max. 0.425 0.425 0.425 0.425 0.425 0.600 0.600 0.600 0.600 0.600 0.800 0.800 0.800 0.800 0.800 0.900 0.900 0.900 0.900 0.900 1.10 1.10 1.10 1.10 1.10 0.600 0.600 0.600 0.600 0.600 0.800 0.800 0.800 0.800 0.800 0.900 0.900 0.900 0.900 0.900 1.20 1.20 1.20 1.20 1.20 1.50 1.50 1.50 1.50 1.50 0.250 0.250 0.250 0.250 0.250 0.400 0.400 0.400 0.400 0.400 0.600 0.600 0.600 0.600 0.600 0.700 0.700 0.700 0.700 0.700 0.900 0.900 0.900 0.900 0.900 1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.375 1.375 1.375 1.375 1.375 1.95 1.95 1.95 1.95 1.95 2.25 2.25 2.25 2.25 2.25 “-RC” suffix indicates RoHS compliance. This series is currently available, but not recommended for new designs. A A B 0.032 Min. B 0.032 Min. E E 0.09 D 2 3 1 4 0.040 ± 0.005 0.15 2 3 1 4 0.050 ± 0.006 D C 0.20 C 2 3 2 3 1 4 1 4 7001-7005 7006-7025 Dimensions: Inches Tel. (877) 426-8767 • Fax (951) 781-5006 REV. 06/15 www.bourns.com 23.13