23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier, 26 dB Gain

23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier,
26 dB Gain, 35 dBm IP3, 5 dB NF, SMA
TECHNICAL DATA SHEET
PE15A8000
The PE15A8000 is wideband general purpose RF coaxial gain block amplifier operating in the 0.05 GHz to 4 GHz frequency
range. The amplifier offers 23 dBm of P1dB, 26 dB of Gain, IP3 of 35 dBm. This exceptional technical performance is
achieved through the use of hybrid MIC design and advanced GaAs PHEMT devices. This gain block amplifier requires only a
single positive supply, typically a +12V DC power supply and includes built-in voltage regulation, is unconditionally stable and
operates over the temperature range of -40°C and +75°C.
Features
•
•
•
•
•
50 MHz to 4 GHz Frequency Range
P1dB: 23 dBm
High Small Signal Gain: 26 dB
IP3: 35 dBm
50 Ohm Input and Output Matched
•
•
•
•
-40 to +75°C Operating Temperature
Unconditionally Stable
Single DC Positive Supply
Built-in Voltage Regulator
Applications
•
•
•
•
•
•
Laboratory Applications
R&D Labs
Military Radio
Radar Systems
Telecom Infrastructure
Test Instrumentation
•
•
•
•
•
•
Military & Space
Communication Systems
Wireless Communication
Microwave Radio Systems
Cellular Base Stations
Low Noise Amplifier
•
•
•
•
•
•
General Purpose Amplification
General Purpose Wireless
Wideband Gain Block
IF Amplifier/RF Driver Amplifier
RF Wideband Front Ends
RF Pre-amplification
Electrical Specifications (TA = +25°C, DC Voltage = 12Volts, DC Current = 120mA)
Description
Frequency Range
Small Signal Gain
MinimumTypical Maximum Units
0.05
24
Gain Flatness
4
GHz
26
28
dB
±1
±1.25
dB
Gain Variance at OTR*
dB
+23
dBm
Output 3rd Intercept Point
+35
dBm
+32
Noise Figure
5
Input VSWR
1.6:1
1.8:1
Output VSWR
1.6:1
1.8:1
Reverse Isolation
Operating DC Voltage
45
11.5
Operating DC Current
Operating Temperature Range
±1
Output at 1 dB Compression Point
6
55
12
120
-40
dB
dB
13
Volts
220
mA
+75
°C
. .
*OTR= Base Plate Operating Temperature Range
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier, 26 dB Gain, 35 dBm IP3, 5 dB NF,
SMA PE15A8000
PE15A8000 REV
1
23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier,
26 dB Gain, 35 dBm IP3, 5 dB NF, SMA
TECHNICAL DATA SHEET
PE15A8000
Absolute Maximum Rating
Parameter
Rating
Units
Source Voltage
+13
Volts
RF input Power
+10
dBm
Operating Temperature (base-plate)
-40 to +75
°C
Storage Temperature
-55 to +125
°C
ESD Sensitive Material,
Transport material in
Approved ESD bags.
Handle only in approved
ESD Workstation.
.
Compliance Certifications (visit www.Pasternack.com for current document)
RoHS Compliant
Plotted and Other Data
Notes:
• Values at +25 °C, sea level
• ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation.
Power Data
dB
Gain, Input Return Loss and Output Return Loss
30
20
Gain(dB) 25 C
10
IN_Return Loss(dB)
0
OUT_Return Loss(dB)
-10
-20
-30
-40
Freq.(MHz)
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier, 26 dB Gain, 35 dBm IP3, 5 dB NF,
SMA PE15A8000
PE15A8000 REV
2
23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier,
26 dB Gain, 35 dBm IP3, 5 dB NF, SMA
TECHNICAL DATA SHEET
PE15A8000
23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier, 26 dB Gain, 35 dBm IP3, 5 dB NF, SMA from Pasternack Enterprises
has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a
99% availability and are part of the broadest selection in the industry.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier, 26 dB Gain, 35 dBm IP3, 5 dB NF, SMA
PE15A8000
URL: http://www.pasternack.com/4-ghz-gain-block-amplifier-26-db-gain-35-dbm-ip3-sma-pe15a8000-p.aspx
PE15A8000 REV
3
PE15A8000 CAD Drawing
23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier,
26 dB Gain, 35 dBm IP3, 5 dB NF, SMA
© 2014 Pasternack Enterprises All Rights Reserved
PE15A8000 REV
4