14 dBm P1dB, 10 MHz to 6 GHz, Gain Block Amplifier, 14.5 dB Gain

14 dBm P1dB, 10 MHz to 6 GHz, Gain Block Amplifier,
14.5 dB Gain, 26 dBm IP3, 4.5 dB NF, SMA
TECHNICAL DATA SHEET
PE15A8001
The PE15A8001 is wideband general purpose RF coaxial gain block amplifier operating in the 0.01 GHz to 6 GHz frequency
range. The amplifier offers 14 dBm typ of P1dB, 14.5 dB typ of Gain, OIP3 typ of 16 dBm. This exceptional technical
performance is achieved through the use of hybrid MIC design and advanced GaAs PHEMT devices. This gain block
amplifier requires only a single positive supply, typically a +12V DC power supply and includes built-in voltage regulation, is
unconditionally stable and operates over the temperature range of -40°C and +75°C.
Features
•
•
•
•
•
10 MHz to 6 GHz Frequency Range
P1dB: 14 dBm
Small Signal Gain: 14.5 dB
OIP3: 26 dBm
50 Ohm Input and Output Matched
•
•
•
•
-40 to +75°C Operating Temperature
Unconditionally Stable
Single DC Positive Supply
Built-in Voltage Regulator
Applications
•
•
•
•
•
•
Laboratory Applications
R&D Labs
Military Radio
Radar Systems
Telecom Infrastructure
Test Instrumentation
•
•
•
•
•
•
Military & Space
Communication Systems
Wireless Communication
Microwave Radio Systems
Cellular Base Stations
Low Noise Amplifier
•
•
•
•
•
•
General Purpose Amplification
General Purpose Wireless
Wideband Gain Block
IF Amplifier/RF Driver Amplifier
RF Wideband Front Ends
RF Pre-amplification
Electrical Specifications (TA = +25°C, DC Voltage = 12Volts, DC Current = 50mA)
Description
MinimumTypical Maximum Units
Frequency Range
0.01
6
Small Signal Gain
13.5
14.5
16
dB
±0.35
±0.5
dB
Gain Flatness
Gain Variance at OTR*
dB
Output at 1 dB Compression Point
+14
dBm
Output 3rd Intercept Point
+26
dBm
+24
Noise Figure
4.5
Input VSWR
1.5:1
2:1
Output VSWR
1.5:1
5.5
2:1
Reverse Isolation
40
43
Operating DC Voltage
9
12
Operating DC Current
50
Operating Temperature Range
±0.75
GHz
-40
dB
dB
15
Volts
65
mA
+75
°C
. .
*OTR= Base Plate Operating Temperature Range
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 14 dBm P1dB, 10 MHz to 6 GHz, Gain Block Amplifier, 14.5 dB Gain, 26 dBm IP3, 4.5 dB NF,
SMA PE15A8001
PE15A8001 REV
1
14 dBm P1dB, 10 MHz to 6 GHz, Gain Block Amplifier,
14.5 dB Gain, 26 dBm IP3, 4.5 dB NF, SMA
TECHNICAL DATA SHEET
PE15A8001
Compliance Certifications (visit www.Pasternack.com for current document)
RoHS Compliant
Plotted and Other Data
Notes:
• Values at +25 °C, sea level
• ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation.
14 dBm P1dB, 10 MHz to 6 GHz, Gain Block Amplifier, 14.5 dB Gain, 26 dBm IP3, 4.5 dB NF, SMA from Pasternack Enterprises
has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a
99% availability and are part of the broadest selection in the industry.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 14 dBm P1dB, 10 MHz to 6 GHz, Gain Block Amplifier, 14.5 dB Gain, 26 dBm IP3, 4.5 dB NF,
SMA PE15A8001
URL: http://www.pasternack.com/6-ghz-gain-block-amplifier-14.5-db-gain-26-dbm-ip3-sma-pe15a8001-p.aspx
PE15A8001 REV
2
PE15A8001 CAD Drawing
14 dBm P1dB, 10 MHz to 6 GHz, Gain Block Amplifier,
14.5 dB Gain, 26 dBm IP3, 4.5 dB NF, SMA
© 2014 Pasternack Enterprises All Rights Reserved
PE15A8001 REV
3