Product Data Sheet MJT 2525 – Acrich MJT Superior high Flux for High Voltage System Acrich MJT – 2525 series SAWWFS72A RoHS Product Brief Description Features and Benefits • The MJT series of LEDs are designed for both AC & DC(High Voltage) operation. • • • With Multi Junction Technology, it reduces Lighting System cost and enhances reliability. • • • • • MJT 2525 is designed for High Current operation not compromising Reliability of LED. • High Flux Output – Typ. 95lm @ 40mA Multi Junction Technology Chips for High Voltage Operation Compact 2.5mmx2.5mm Size Available in 2600~3000K with CRI 80 SMT solderable RoHS compliant Key Applications • • • • It is optimized LED solution for application which has size limitation such as bulb and application and enable never before seen lumen density which requires such as Candle Light, Par and Down light. LED Retrofit Bulbs Par & Down Light Architectural lighting Decorative / Pathway lighting Table 1. Product Selection Table CCT Part Number SAWWFS72A Rev.00, March 1, 2014 Color Min. Typ. Max. Warm White 2600K 3000K 3700K 1 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Table of Contents Index • Product Brief • Table of Contents • Performance Characteristics • Color Bin Structure • Mechanical Dimensions • Recommended Solder Pad • Reflow Soldering Characteristics • Emitter Tape & Reel Packaging • Product Nomenclature • Handling of Silicone Resin for LEDs • Precaution For Use • Company Information Rev.00, March 1, 2014 2 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Performance Characteristics Table 1. Characteristics, IF=40mA, Ta= 25ºC, RH30% Value Parameter Symbol Unit Min. Typ. Max. Forward Current IF - 40 - mA Forward Voltage VF 21.5 - 24.5 V - 95 - lm CCT 2600 - 3700 K Ra 80 - - Deg. Viewing Angle 2Θ1/2 - 130 - Deg. Junction Temperature Tj - - 125 ºC Storage Temperature Tstg - 40 - + 100 ºC Thermal resistance (J to S) [5] RθJ-S - 17.7 - ℃/W ESD Sensitivity(HBM) - 5k - - V Luminous Flux Correlated Color Temperature CRI ФV [1] [3] [4] [2] Table 2. Absolute Maximum Ratings Parameter Symbol Value Unit Forward Current IF 60 mA Power Dissipation PD 1.4 W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ + 100 ºC Storage Temperature Tstg -40 ~ + 100 ºC Notes : (1) Seoul Semiconductor maintains a tolerance of 7% on flux and power measurements. (2) ФV is the total luminous flux output as measured with an integrating sphere. (3) Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. Color coordinate : 0.01, CCT 5% tolerance. (4) Tolerance is 2.0 on CRI measurements. (5) Thermal resistance is junction to TS point (Refer to page 16). • Calculated performance values are for reference only. • All measurements were made under the standardized environment of SSC. Rev.00, March 1, 2014 3 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Relative Spectral Distribution Fig 1. Color Spectrum, IF=40mA, Ta = 25ºC, RH30% Fig 2. Typical Spatial Distribution Rev.00, March 1, 2014 4 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Forward Current Characteristics Fig 3. Forward Current vs. Forward Voltage, T a=25℃ Fig 4. Forward Current vs. Relative Luminous Flux, T a=25℃ Rev.00, March 1, 2014 5 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Forward Current Characteristics Fig 5. Forward Current vs. CIE x,y Shift, T a=25℃ Rev.00, March 1, 2014 6 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Junction Temperature Characteristics Fig 6. Junction Temperature vs. Relative Luminous Flux, IF=40mA Fig 7. Junction Temperature vs. Relative Forward Voltage, IF=40mA Rev.00, March 1, 2014 7 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Junction Temperature Characteristics Fig 8. Junction Temperature vs. CIE x,y Shfit, IF=40mA Rev.00, March 1, 2014 8 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Ambient Temperature Characteristics Fig 9. Ambient Temperature vs. Maximum Forward Current, Tj_max = 125℃ Rev.00, March 1, 2014 9 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Color Bin Structure Table 3. Bin Code description, Ta=25℃, IF=40mA Luminous Flux (lm) Part Number Bin Code Min. Max. T2 85.0 90.0 U1 90.0 95.0 U2 95.0 101.0 U3 101.0 107.0 Color Chromaticity Coordinate Refer to Page 12, 13, 14 SAWWFS72A Rev.00, March 1, 2014 10 Typical Forward Voltage (V) Bin Code Min. Max. A 21.5 22.5 B 22.5 23.5 C 23.5 24.5 - - - www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Color Bin Structure CIE Chromaticity Diagram (Warm white), Ta=25℃, IF=40mA 0.42 3200K 3500K 0.41 3700K CIE Y 0.40 F21 F11 F42 F32 F22 F43 F12 0.39 F41 F31 F33 F23 F44 F13 F34 0.38 F24 F14 0.37 0.39 0.40 0.41 0.42 0.43 CIE X F11 F21 F31 F41 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.3996 0.4015 0.4071 0.4052 0.4146 0.4089 0.4223 0.4127 0.3969 0.3934 0.4042 0.3969 0.4114 0.4005 0.4187 0.4041 0.4042 0.3969 0.4114 0.4005 0.4187 0.4041 0.4261 0.4077 0.4052 0.4146 0.4089 0.4223 0.4127 0.4299 0.4071 F12 F22 F32 0.4165 F42 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.3969 0.3934 0.4042 0.3969 0.4114 0.4005 0.4187 0.4041 0.3943 0.3853 0.4012 0.3886 0.4082 0.3920 0.4152 0.3955 0.4012 0.3886 0.4082 0.3920 0.4152 0.3955 0.4223 0.3990 0.4042 0.3969 0.4114 0.4005 0.4187 0.4041 0.4261 0.4077 F13 F23 F33 F43 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.3943 0.3853 0.4012 0.3886 0.4082 0.3920 0.4152 0.3955 0.3916 0.3771 0.3983 0.3803 0.4049 0.3836 0.4117 0.3869 0.3983 0.3803 0.4049 0.3836 0.4117 0.3869 0.4185 0.3902 0.4012 0.3886 0.4082 0.3920 0.4152 0.3955 0.4223 0.3990 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.3916 0.3771 0.3983 0.3803 0.4049 0.3836 0.4117 0.3869 0.3889 0.3690 0.3953 0.3721 0.4017 0.3751 0.4082 0.3783 0.3953 0.3721 0.4017 0.3751 0.4082 0.3783 0.4147 0.3814 0.3983 0.3803 0.4049 0.3836 0.4117 0.3869 0.4185 0.3902 F14 F24 Rev.00, March 1, 2014 F34 11 F44 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Color Bin Structure CIE Chromaticity Diagram (Warm white), Ta=25℃, IF=40mA 0.43 2900K 3000K 3200K 0.42 G41 G31 G21 G11 G42 CIE Y 0.41 G32 G22 G12 G43 0.40 G23 G33 G13 0.39 G14 G24 G44 G34 0.38 0.41 0.42 0.43 0.44 0.45 0.46 CIE X G11 G21 G31 G41 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.4299 0.4165 0.4364 0.4188 0.4430 0.4212 0.4496 0.4236 0.4261 0.4077 0.4324 0.4099 0.4387 0.4122 0.4451 0.4145 0.4324 0.4100 0.4387 0.4122 0.4451 0.4145 0.4514 0.4168 0.4189 0.4430 0.4212 0.4496 0.4236 0.4562 0.4365 G12 G22 G32 0.4260 G42 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.4261 0.4077 0.4324 0.4100 0.4387 0.4122 0.4451 0.4145 0.4223 0.3990 0.4284 0.4011 0.4345 0.4033 0.4406 0.4055 0.4284 0.4011 0.4345 0.4033 0.4406 0.4055 0.4468 0.4077 0.4324 0.4100 0.4387 0.4122 0.4451 0.4145 0.4515 0.4168 G13 G23 G33 G43 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.4223 0.3990 0.4284 0.4011 0.4345 0.4033 0.4406 0.4055 0.4185 0.3902 0.4243 0.3922 0.4302 0.3943 0.4361 0.3964 0.4243 0.3922 0.4302 0.3943 0.4361 0.3964 0.4420 0.3985 0.4284 0.4011 0.4345 0.4033 0.4406 0.4055 0.4468 0.4077 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.4243 0.3922 0.4302 0.3943 0.4302 0.3943 0.4361 0.3964 0.4203 0.3834 0.4259 0.3853 0.4259 0.3853 0.4316 0.3873 0.4147 0.3814 0.4203 0.3834 0.4316 0.3873 0.4373 0.3893 0.4185 0.3902 0.4243 0.3922 0.4361 0.3964 0.4420 0.3985 G14 G24 Rev.00, March 1, 2014 G34 12 G44 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Color Bin Structure CIE Chromaticity Diagram (Warm white), Ta=25℃, IF=40mA 0.44 0.43 2900K CIE Y H21 H11 0.42 H13 H24 H34 H41 H31 H42 H43 H33 H23 0.40 H14 H32 H22 H12 0.41 2600K 2700K H44 0.39 0.38 0.43 0.44 0.45 0.46 0.47 0.48 CIE X H11 H21 H31 H41 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.4562 0.4260 0.4625 0.4275 0.4687 0.4289 0.4750 0.4304 0.4515 0.4168 0.4575 0.4182 0.4636 0.4197 0.4697 0.4211 0.4575 0.4182 0.4636 0.4197 0.4697 0.4211 0.4758 0.4225 0.4275 0.4687 0.4289 0.4750 0.4304 0.4810 0.4625 H12 H22 H32 0.4319 H42 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.4515 0.4168 0.4575 0.4182 0.4636 0.4197 0.4697 0.4211 0.4468 0.4077 0.4526 0.4090 0.4585 0.4104 0.4644 0.4118 0.4526 0.4090 0.4585 0.4104 0.4644 0.4118 0.4703 0.4132 0.4575 0.4182 0.4636 0.4197 0.4697 0.4211 0.4758 0.4225 H13 H23 H33 H43 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.4468 0.4077 0.4526 0.4090 0.4585 0.4104 0.4644 0.4118 0.4420 0.3985 0.4477 0.3998 0.4534 0.4012 0.4591 0.4025 0.4477 0.3998 0.4534 0.4012 0.4591 0.4025 0.4648 0.4038 0.4526 0.4090 0.4585 0.4104 0.4644 0.4118 0.4703 0.4132 CIE X CIE Y CIE X CIE Y CIE X CIE Y CIE X CIE Y 0.4420 0.3985 0.4477 0.3998 0.4534 0.4012 0.4591 0.4025 0.4373 0.3893 0.4428 0.3906 0.4483 0.3919 0.4538 0.3932 0.4428 0.3906 0.4483 0.3919 0.4538 0.3932 0.4593 0.3944 0.4477 0.3998 0.4534 0.4012 0.4591 0.4025 0.4648 0.4038 H14 H24 Rev.00, March 1, 2014 H34 13 H44 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Mechanical Dimensions < Top View > < Bottom View > Cathode Anode < Side View > Zener Diode Notes : (1) All dimensions are in millimeters. (2) Scale : none. (3) Undefined tolerance is ±0.1mm. (4) The appearance and specifications of the product may be changed for improvement without notice. Rev.00, March 1, 2014 14 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Recommended Solder Pad < Solder Pad > TS point Notes : (1) All dimensions are in millimeters. (2) Scale : none. (3) Undefined tolerance is ±0.1mm. (4) The appearance and specifications of the product may be changed for improvement without notice. Rev.00, March 1, 2014 15 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Reflow Soldering Characteristics IPC/JEDEC J-STD-020 Table 4. Reflow Soldering Characteristics Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly Average ramp-up rate (Ts_max to Tp) 3° C/second max. 3° C/second max. Preheat - Temperature Min (Ts_min) - Temperature Max (Ts_max) - Time (Ts_min to Ts_max) (ts) 100 °C 150 °C 60-120 seconds 150 °C 200 °C 60-180 seconds Time maintained above: - Temperature (TL) - Time (tL) 183 °C 60-150 seconds 217 °C 60-150 seconds Peak Temperature (Tp) 215℃ 260℃ Time within 5°C of actual Peak Temperature (tp)2 10-30 seconds 20-40 seconds Ramp-down Rate 6 °C/second max. 6 °C/second max. Time 25°C to Peak Temperature 6 minutes max. 8 minutes max. Caution : (1) Reflow soldering is recommended not to be done more than two times In the case of more than 24 hours passed soldering after first, LEDs will be damaged. (2) Repairs should not be done after the LEDs have been soldered When repair is unavoidable, suitable tools must be used. (3) Die slug is to be soldered. (4) When soldering, do not put stress on the LEDs during heating. (5) After soldering, do not warp the circuit board. Rev.00, March 1, 2014 16 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Emitter Tape & Reel Packaging ( Tolerance: ±0.2, Unit: mm ) Notes : (1) Quantity : Max. 3,500pcs/reel. (2) Cumulative tolerance : Cumulative tolerance/10 pitches to be ±0.2mm. (3) Adhesion strength of cover tape : Adhesion strength to be 0.1~0.7N when the cover tape is turned off from the carrier tape at the angle of 10 º to the carrier tape. (4) Package : P/N, Manufacturing data code No. and Quantity to be indicated on a damp proof package. Rev.00, March 1, 2014 17 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Emitter Tape & Reel Packaging Reel Aluminum Bag Outer Box Rev.00, March 1, 2014 18 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Product Nomenclature Table 5. Part Numbering System : X1X2X3X4X5X6X7X8 Part Number Code Description Part Number Value X1 Company S SSC X2 Top View LED series A Acrich X3 Color Specification WW Warm white X4 Package series FS FS series X5X6 Characteristic code 72 X7 Revision A Table 6. Lot Numbering System :Y1Y2Y3Y4Y5Y6Y7Y8Y9Y10–Y11Y12Y13Y14Y15Y16Y17 Lot Number Code Description Y1Y2 Year Y3 Month Y4Y5 Day Y6 Top View LED series Y7Y8Y9Y10 Mass order Y11Y12Y13Y14Y15Y16Y17 Internal Number Rev.00, March 1, 2014 Lot Number 19 Value www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Handling of Silicone Resin for LEDs (1) During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all types should not be used to pierce the sealing compound. (2) In general, LEDs should only be handled from the side. By the way, this also applies to LEDs without a silicone sealant, since the surface can also become scratched. (3) When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented. This is assured by choosing a pick and place nozzle which is larger than the LED’s reflector area. (4) Silicone differs from materials conventionally used for the manufacturing of LEDs. These conditions must be considered during the handling of such devices. Compared to standard encapsulants, silicone is generally softer, and the surface is more likely to attract dust. As mentioned previously, the increased sensitivity to dust requires special care during processing. In cases where a minimal level of dirt and dust particles cannot be guaranteed, a suitable cleaning solution must be applied to the surface after the soldering of components. (5) SSC suggests using isopropyl alcohol for cleaning. In case other solvents are used, it must be assured that these solvents do not dissolve the package or resin. Ultrasonic cleaning is not recommended. Ultrasonic cleaning may cause damage to the LED. (6) Please do not mold this product into another resin (epoxy, urethane, etc) and do not handle this product with acid or sulfur material in sealed space. (7) Avoid leaving fingerprints on silicone resin parts. Rev.00, March 1, 2014 20 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Precaution for Use (1) Storage To avoid the moisture penetration, we recommend storing Z5 Series LEDs in a dry box with a desiccant . The recommended storage temperature range is 5℃ to 30℃ and a maximum humidity of RH50%. (2) Use Precaution after Opening the Packaging Use proper SMD techniques when the LED is to be soldered dipped as separation of the lens may affect the light output efficiency. Pay attention to the following: a. Recommend conditions after opening the package - Sealing / Temperature : 5 ~ 40℃ Humidity : less than RH30% b. If the package has been opened more than 1 year (MSL 2) or the color of the desiccant changes, components should be dried for 10-12hr at 60±5℃ (3) Do not apply mechanical force or excess vibration during the cooling process to normal temperature after soldering. (4) Do not rapidly cool device after soldering. (5) Components should not be mounted on warped (non coplanar) portion of PCB. (6) Radioactive exposure is not considered for the products listed here in. (7) Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or shredded in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed of. (8) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA (Isopropyl Alcohol) should be used. (9) When the LEDs are in operation the maximum current should be decided after measuring the package temperature. (10) LEDs must be stored properly to maintain the device. If the LEDs are stored for 3 months or more after being shipped from Seoul Semiconductor. A sealed container with a nitrogen atmosphere should be used for storage. (11) The appearance and specifications of the product may be modified for improvement without notice. (12) Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. Rev.00, March 1, 2014 21 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Precaution for Use (13) VOCs (Volatile organic compounds) emitted from materials used in the construction of fixtures can penetrate silicone encapsulants of LEDs and discolor when exposed to heat and photonic energy. The result can be a significant loss of light output from the fixture. Knowledge of the properties of the materials selected to be used in the construction of fixtures can help prevent these issues. (14) The slug is electrically isolated. (15) Attaching LEDs, do not use adhesives that outgas organic vapor. (16) The driving circuit must be designed to allow forward voltage only when it is ON or OFF. If the reverse voltage is applied to LED, migration can be generated resulting in LED damage. (17) LEDs are sensitive to Electro-Static Discharge (ESD) and Electrical Over Stress (EOS). Below is a list of suggestions that Seoul Semiconductor purposes to minimize these effects. a. ESD (Electro Static Discharge) Electrostatic discharge (ESD) is the defined as the release of static electricity when two objects come into contact. While most ESD events are considered harmless, it can be an expensive problem in many industrial environments during production and storage. The damage from ESD to an LEDs may cause the product to demonstrate unusual characteristics such as: - Increase in reverse leakage current lowered turn-on voltage - Abnormal emissions from the LED at low current The following recommendations are suggested to help minimize the potential for an ESD event. One or more recommended work area suggestions: - Ionizing fan setup - ESD table/shelf mat made of conductive materials - ESD safe storage containers One or more personnel suggestion options: - Antistatic wrist-strap - Antistatic material shoes - Antistatic clothes Environmental controls: - Humidity control (ESD gets worse in a dry environment) Rev.00, March 1, 2014 22 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Precaution for Use b. EOS (Electrical Over Stress) Electrical Over-Stress (EOS) is defined as damage that may occur when an electronic device is subjected to a current or voltage that is beyond the maximum specification limits of the device. The effects from an EOS event can be noticed through product performance like: - Changes to the performance of the LED package (If the damage is around the bond pad area and since the package is completely encapsulated the package may turn on but flicker show severe performance degradation.) - Changes to the light output of the luminaire from component failure - Components on the board not operating at determined drive power Failure of performance from entire fixture due to changes in circuit voltage and current across total circuit causing trickle down failures. It is impossible to predict the failure mode of every LED exposed to electrical overstress as the failure modes have been investigated to vary, but there are some common signs that will indicate an EOS event has occurred: - Damaged may be noticed to the bond wires (appearing similar to a blown fuse) - Damage to the bond pads located on the emission surface of the LED package (shadowing can be noticed around the bond pads while viewing through a microscope) - Anomalies noticed in the encapsulation and phosphor around the bond wires. - This damage usually appears due to the thermal stress produced during the EOS event. c. To help minimize the damage from an EOS event Seoul Semiconductor recommends utilizing: - A surge protection circuit - An appropriately rated over voltage protection device - A current limiting device Rev.00, March 1, 2014 23 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Company Information Published by Seoul Semiconductor © 2013 All Rights Reserved. Company Information Seoul Semiconductor (www.SeoulSemicon.com) manufacturers and packages a wide selection of light emitting diodes (LEDs) for the automotive, general illumination/lighting, Home appliance, signage and back lighting markets. The company is the world’s fifth largest LED supplier, holding more than 10,000 patents globally, while offering a wide range of LED technology and production capacity in areas such as “nPola”, "Acrich", the world’s first commercially produced AC LED, and "Acrich MJT Multi-Junction Technology" a proprietary family of high-voltage LEDs. The company’s broad product portfolio includes a wide array of package and device choices such as Acrich and Acirch2, high-brightness LEDs, mid-power LEDs, side-view LEDs, and through-hole type LEDs as well as custom modules, displays, and sensors. Legal Disclaimer Information in this document is provided in connection with Seoul Semiconductor products. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Seoul Semiconductor hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. The appearance and specifications of the product can be changed to improve the quality and/or performance without notice. Rev.00, March 1, 2014 24 www.seoulsemicon.com Product Data Sheet MJT 2525 – Acrich MJT Company Information Published by Seoul Semiconductor © 2013 All Rights Reserved. Company Information Seoul Semiconductor (www.SeoulSemicon.com) manufacturers and packages a wide selection of light emitting diodes (LEDs) for the automotive, general illumination/lighting, Home appliance, signage and back lighting markets. The company is the world’s fifth largest LED supplier, holding more than 10,000 patents globally, while offering a wide range of LED technology and production capacity in areas such as “nPola”, "Acrich", the world’s first commercially produced AC LED, and "Acrich MJT Multi-Junction Technology" a proprietary family of high-voltage LEDs. The company’s broad product portfolio includes a wide array of package and device choices such as Acrich and Acirch2, high-brightness LEDs, mid-power LEDs, side-view LEDs, and through-hole type LEDs as well as custom modules, displays, and sensors. Legal Disclaimer Information in this document is provided in connection with Seoul Semiconductor products. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Seoul Semiconductor hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. The appearance and specifications of the product can be changed to improve the quality and/or performance without notice. Rev.00, March 1, 2014 25 www.seoulsemicon.com