Electric Double Layer Capacitors(Gold Capacitor)/ SE Stacked coin Type Series: SE n Feature Country of Origin Endurance : 70°C 1000 h Automatic insertion available RoHS directive compliant Japan n Recommended Applications Memory back-up for video and audio equipment, cameras, telephones, printers, data terminals, rice cookers and intelligent remote controls. n Specifications Maximum Operating Voltage -25 to +70°C 5.5 V .DC Nominal Cap. Range 0.022 to 0.22 F Category temp. range Capacitance change Internal resistance ±30% of initial measured value at +20°C (-25 to +70°C) < 5 times of initial measured value at +20°C (at -25°C) After 1000 hours application of 5.5V. DC at +70°C, the capacitor shall meet the following limits. Capacitance change ±30% of initial measured value Internal resistance < 4 times of initial specified value After 1000 hours storage at +70°C without load, the capacitor shall meet the specified limits for Endurance. Characteristics at Low Temperature Endurance Shelf Life After 500 hours storage at +55°C, 90 to 95% R.H., the capacitor shall meet the specified limits for Endurance. Moisture Resistance n Dimensions in mm (not to scale) ± B o ] o B Dimensions φd P0 F W W0 W1 W2 H φD 0 P P1 P2 ∆h, ∆h1 H1 Nominal Tolerance 0.55 12.7 5.0 18.0 5.5< 9.0 0 to 3.0 18.0 4.0 12.7 3.85 6.35 0 28.5< ± 0.05 ± 0.2 +0.8 - 0.2 ±0.5 ±0.5 ±0.5 ±0.2 ±1.0 ±0.50 ±1.00 ±1.0 - iExpected dimensions of the capacitor above the board after soldering n Standard Products Maximum Operating Voltage (V.DC) 5.5 Capacitance (F) 0.022 0.047 0.10 0.22 Capacitance range (F) 0.0176 0.0376 0.080 0.176 to to to to 0.0396 0.0846 0.180 0.396 Internal resistance (Ω) at 1kHz < 150 < 120 < 75 < 75 Part number Min. Packaging Qíty EECSE0H223 EECSE0H473 EECSE0H104 EECSE0H224 1000 1000 1000 1000 (PCS) Note: 1. When ordering please observe the minimum packaging quantity. 2. When the surface mount component goes through UV or a heat oven to affix the adhesive glue, the capacitorís surface temperature should not exceed 100°C for more than 60 seconds(maximum temperature should not exceed 105°C) 3. Do not use reflow soldering .(IR, Atmosphere heating methods, etc.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE204