WL 1000 Liquid to Air Heat Exchanger System Innovative Technology for a Connected World WATER COOLED HEAT EXCHANGER UNITS FOR MEDICAL AND INDUSTRIAL SYSTEMS The WL1000 is a re-circulating liquid to air heat exchanger that offers dependable, compact performance by removing large amounts of heat from a liquid circuit. The coolant is recirculated using a high pressure pump to assure maximum flow rate. Heat from coolant is absorbed by a radiant heat exchanger and dissipated into the ambient environment using a brand name fan. This unit incorporates a water filter to maintain peak performance throughout operation life of product. Manual adjustments can be made to control pressure and flow of liquid circuit. Customized features are available, however, MOQ applies. FEATURES Applications • Compact design • Reliable Operation • Adjustable Flow Rate • Bypass Valve Protection • Medical Imaging Systems • Photonics Laser Systems • X-Ray Scanning Systems • Semiconductor Fabrication Specifications Performance Cooling capacity1 Flow Rate 1,000 Watts > 4.4 lpm @ 4 bar Operation Coolant Water or Water/Glycol Operational temperature range2 10°C to 40°C Storage temperature range (w/o coolant) -40°C to 70°C Humidity range 20% to 80% Input Voltage 230 VAC Frequency 50/60 Hz Current Draw Noise 2 Amps < 70 dB(A) Flow switch opens 4.0 lpm Maximum forward pressure 6.0 bar Physical Dimensions (H x W x D) Weight (w/o coolant) Coolant Capacity Couplings 30.0 x 29.2 x 33.0 cm 17.0 kg 1.5 L Press Fit (12 mm ID hose) 1 Capacity rating is given at a temperature of 25°C (77°F) for the ambient air and water outlet temperature of 11.6°C. 2 For ambient conditions outside this range, please contact Laird Technologies. global solutions: local support Americas: +1.888.246.9050 Europe: +46.31.704.67.57 Asia: +86.755.2714.1166 [email protected] www.lairdtech.com/thermal TM WL 1000 Liquid to Air Heat Exchanger System Innovative Technology for a Connected World performance curves Temperature Difference Inlet and Amient Temperature Thermal Capacity Water-Glycol 50 / 50% Water-Glycol 60 / 40% Water-Glycol 70 / 30% Water Achievement (Watts) Delivery Volume (L) Flow Rate Line Pressure ((p) bar) WL 1000 Liquid to Air Heat Exchanger System Innovative Technology for a Connected World Isometric Drawings Notes 1. F or optimal cooling performance, coolant level should always be above radiator fins 2.Hose selection should be of material and thickness to support pressure resistance and coolant type. 3. Manual adjustments can be made to control pressure and flow rate. 4. Check coolant filter periodically for replacement. Ordering information Part Number Example W L Water Air 1 0 0 0 Capacity (Watts) THR-DS-WL 1000 0812 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2012 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.