ICA-700 DOC-CAS-700000-009 SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-700 Revision: 1.9 Issue Date: OCT. 25, 2007 HAMBURG INDUSTRIES CO., LTD. 6FL., NO.12, Lane 270, SEC. 3, Pei Shen RD., Shen Keng Hsiang, Taipei Hsien, Taiwan 222 TEL: 886 - 2 - 2662 8882 FAX: 886 - 2 - 2662 7201~2 E-Mail: [email protected] URL: http://www.hamburg.com.tw HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Revision 1.9 ICA-700 DOC-CAS-700000-009 TABLE OF CONTENTS PAGE ARTICLE 1 INTRODUCTION...................................................................................................................... 1 General..................................................................................................................................... 1 Features ................................................................................................................................... 1 Applications.............................................................................................................................. 1 2 TECHNICAL CHARACTERISTICS .......................................................................................... 2 2.1 General Characteristics.................................................................................................. 2 2.2 Electrical Characteristics................................................................................................ 2 2.3 Mechanical Characteristics ............................................................................................ 2 2.4 Solderability.................................................................................................................... 3 2.5 Environmental Characteristics........................................................................................ 3 3 ORDERING CODE................................................................................................................... 3 4 INTERFACE ............................................................................................................................. 4 4.1 5 Signals ........................................................................................................................... 4 MECHANICAL OUTLINE DRAWING ....................................................................................... 5 5.1 Mechanical Outline Dimension (DIP Type) .................................................................... 5 5.2 Reference Dimension For PCB Layout (DIP Type)........................................................ 5 5.3 Mechanical Outline Dimension (SMT Type)................................................................... 6 5.4 Reference Dimension For PCB Layout (SMT Type) ...................................................... 6 5.5 Mechanical Outline Dimension (SMT Type Short Pin) ................................................... 7 5.6 Reference Dimension For PCB Layout (SMT Type Short Pin)....................................... 7 APPENDIX A: PACKING INFORMATION .................................................................................... 8 APPENDIX B: CARD SPECIFICATION (ISO 7816 Part 2)........................................................... 9 APPENDIX C: IC CARD CONTACT LOCATION (ISO 7816 Part 2)............................................. 10 HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Revision 1.9 ICA-700 1. DOC-CAS-700000-009 INTRODUCTION General: The ICA-700 is an interface device for ISO based IC CARD or SMART card. It is designed for high performance and flexibility to give prospective customers a quick applications of the individual devices in their product series, and to facilitate selection if the device it decides that are best-suited to intended target applications. Features: ISO 7816 Standard IC Card or SMART Card. ( note ) Compact Physical Size for Multi-Purpose Application. Module Type IC Contact Compatible with CP8. ( note ) High Reliability Landing Contact Extension operation Life of Contact. Landing Contact Technology. EMV Compliant. RoHS Directive 2002/95/EC Compliant. Applications: Access Control Terminals. Terminal Identification module. Telecommunication. Vending Machines. Other Identification recognition. Note: All trademarks mentioned herein are the property of their respective companies. HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Revision 1.9 -1- ICA-700 2. DOC-CAS-700000-009 TECHNICAL CHARACTERISTICS 2.1 General Characteristics: Items Dimension Weight Card size Contact principle Operating position Mounting System Durability Standard ISO 7816 part 2 2.2 Electrical Characteristics: According to Standard IEC512 Items Standard 2.2.1 Data Contacts Number of Contacts Contact resistance IEC512-2-2a Insulation resistance Pin to pin IEC512-2-3a Rated voltage Rated current Dielectric withstanding voltage IEC512-2-4a 2.2.2 Card Detector & Switch Switch type Operation Contact resistance IEC512-2-2a Insulation resistance Pin to pin IEC512-2-3a Rated voltage Rated current Dielectric withstanding voltage IEC512-2-4a 2.3 Mechanical Characteristics: Items Card Insertion force Card Withdrawal force Contact force Contact location Data Contacts Material Plating Card Detector & Switch Contact area Terminal area Insulation material Standard Description 55.50L x 40.00W x 5.80H mm Approx. 12.6 g 85.6 x 54 x 0.76 mm Landing technology Shaft up / Down / Horizontal DIP (standard) or SMT Type 200,000 cycles min. Description 8, 16 pins (optional) 50 mΩ typical, 100 mΩ max. > 1000 MΩ / 500 V DC 50 V max. 1 A max. 500 V AC rms 1 min. (sea level) Sealed Normally Open 50 mΩ typical, 100 mΩ max. > 1000 MΩ / 500 V DC 50 V max. 50 mA max. 500 V AC rms 1 min. (sea level) Description 10N max. 7N max. 0.2N ~ 0.6N ISO 7816 part 2 HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Phosphor bronze Gold over Nickel Silver Plated Tin Plated Thermoplastic, UL 94V-0 Revision 1.9 -2- ICA-700 2.4 DOC-CAS-700000-009 Solderability: According to Standard IEC68 Items Standard Wave Description IEC68-2-20 260°C, 5 sec. Max. (DIP Type) IR reflow Not applicable Manual soldering 2.5 IEC68-2-20 Environmental Characteristics: According to Standard IEC68 Items 3. 360°C, 3 sec. Max. Standard Description Operating temperature - 40°C ~ + 85°C Operating humidity 10 % ~ 95 % RH Storage temperature - 40°C ~ + 85°C Storage humidity 10 % ~ 95 % RH ORDERING CODE Part Number Number of Contacts Mounting System PCB Locating Pegs (Post) Logo 7000858-DIOY11 7000858-DIOY10 7000858-DIOY01 7000858-DIOY00 7000858-SIOY11 7000858-SIOY10 7000858-SIOY01 7000858-SIOY00 7001658-DFOY11 7001658-SFOY11 8 8 8 8 8 8 8 8 16 16 DIP DIP DIP DIP SMT SMT SMT SMT DIP SMT Yes Yes No No Yes Yes No No Yes Yes Yes No Yes No Yes No Yes No Yes Yes HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Revision 1.9 -3- ICA-700 4. DOC-CAS-700000-009 INTERFACE VCC RST CLK *** ISO 8 GND VPP I/O *** ICA-700 HOST IC CARD ACCEPTOR AFNOR 8 CD1 CD2 4.1 Signals Signal interface connections for ICA-700 are shown below. Contact No. Assignment Description C1 VCC Power Voltage C2 RST Reset Signal C3 CLK Clocking Signal C4 *** Reserved for feature use C5 GND Power and Signal Ground C6 VPP Programming Voltage C7 I/O Serial Data input/output C8 *** Reserved for feature use C1 AFNOR 8, pin 1 C2 AFNOR 8, pin 2 C3 AFNOR 8, pin 3 C4 AFNOR 8, pin 4 C5 AFNOR 8, pin 5 C6 AFNOR 8, pin 6 C7 AFNOR 8, pin 7 C8 AFNOR 8, pin 8 CD1 CD1 Switch contact 1 of card detector CD2 CD2 Switch contact 2 of card detector HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Remark Revision 1.9 -4- ICA-700 5. DOC-CAS-700000-009 MECHANICAL OUTLINE DRAWING Unit: mm; Tolerances: ±0.15 mm Figure 5.1 Mechanical outline dimension (DIP Type) Figure 5.2 Unit: mm; Tolerances: ±0.05 mm Reference dimension for PCB layout (DIP Type) HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Revision 1.9 -5- ICA-700 DOC-CAS-700000-009 Unit: mm; Tolerances: ±0.15 mm Figure 5.3 Mechanical outline dimension (SMT Type) Unit: mm; Tolerances: ±0.05 mm Figure 5.4 Reference dimension for PCB layout (SMT Type) HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Revision 1.9 -6- ICA-700 DOC-CAS-700000-009 Figure 5.5 Figure 5.6 Unit: mm; Tolerances: ±0.15 mm Mechanical outline dimension (SMT Type Short Pin) Unit: mm; Tolerances: ±0.05 mm Reference dimension for PCB layout (SMT Type Short Pin) HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Revision 1.9 -7- ICA-700 APPENDIX A: DOC-CAS-700000-009 PACKING INFORMATION Q’TY: Meas.: 36 PCs per tray 44.0L x 32.0W x 2.0H CM N.W.: G.W.: Q’TY: 2.27 KGS 3.16 KGS 180 PCs per box (5 trays set in order plus one empty tray) 46.0L x 32.0W x 8.8H CM Meas.: N.W.: G.W.: Q’TY: Meas.: HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS 11.34 KGS 16.80 KGS 900 PCs per carton (5 boxes set in order) 48.0L x 35.0W x 47.5H CM Revision 1.9 -8- ICA-700 APPENDIX B: DOC-CAS-700000-009 CARD SPECIFICATION (ISO 7816-2 Part 2) Dimensions in millimeters (mm) Upper edge A B C D E F G H Left edge a b c d C1 C5 C2 C6 C3 C7 C4 C8 a = 10.25 max b = 12.25 min c = 17.87 max d = 19.87 min A = 19.23 max B = 20.93 min C = 21.77 max D = 23.47 min E = 24.31 max F = 26.01 min G = 26.85 max H = 28.55 min HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Revision 1.9 -9- ICA-700 DOC-CAS-700000-009 APPENDIX C: IC CARD CONTACTF LOCATION (ISO 7816-2 Part 2) Dimensions in millimeters (mm) 85.47 ~ 85.72 mm IC CONTACTS ( Front Side ) 53.92 ~ 54.03 mm Thickness: 0.76 +/- 0.08 mm HAMBURG INDUSTRIES CO., LTD. All Rights Reserved. All specifications and details published are subject to change without notice. PLEASE DO NOT REPRODUCE OR COPY BY ANY MEANS Revision 1.9 - 10 -