DR300 series IP67

DR300
3 0 0 W S i n g l e O u t put LED Driver with PFC
series
Constant Voltage and Current Output
Universal AC Input of 100~305VAC
Built-in Active PFC function
Protections: Short Circuit/Over Voltage/Over Load/Over
Temperature
Cooling by Free Air Convection
3 in 1 Dimming Function (optional)
Adjustable Output Voltage and Current (optional)
Suitable for LED Lighting and LED Electronic Display
Applications
IP66 ~ IP67 Design for Indoor or Outdoor Installations
Suitable for Dry / Damp / Wet Locations
5 Year Warranty
IP67
Model Number
Output Voltage Rated Output Amps Efficiency Constant Current Range (Note 3)
DR300-208S140
DR300-172S175
DR300-143S210
208Volts(DC)
172Volts(DC)
143Volts(DC)
1.4 Amps
1.75 Amps
2.1 Amps
All specifications are typical at nominal input, full load, and 25°C unless otherwise noted
WWW.ASTRODYNE.COM
92%
92%
92%
125~208 Volts(DC)
104~172 Volts(DC)
86~143 Volts(DC)
Astrodyne products are not authorized or warranteed for use
as critical components in life support systems, equipment used
in hazardous environments, nuclear controls systems, or other
mission-critical applications.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
DR300
3 0 0 W S i n g l e O u t put LED Driver with PFC
INPUT SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Input Voltage Range (Note 4)
Frequency Range
Input Current
Leakage Current
Inrush Current
Power Factor
Oper. Temperature Operating Humidity
Storage Temp. / Humidity
Max. Case Temperature
Vibration
MTBF
IP Rating
100-305VAC
47-63 Hz (50/60 Hz nominal)
3.5 Amps max @ 100VAC
1.6 Amps max @ 220VAC
<0.75mA/230VAC
<0.5mA/120VAC
65A
0.96 (220Vac)
OUTPUT SPECIFICATIONS
Voltage and Current
Constant Current Range
Dimming Current Range
Voltage Tolerance (Note 2)
Line Regulation
Load Regulation
Efficiency
Ripple/Noise (Note 1)
Turn-on Delay Time (Note 6)
Temperature Coefficient
Output Overshoot / Undershoot
Over Voltage Protection
Over Current Protection (Note 3)
Short Circuit Protection
Over Temperature Protection See Selection Chart
See Selection Chart
10~100% rated output current,
≥50% rated output voltage
±5%
±1%
±5%
See Selection Chart
≤10% Output Voltage
3S, max.
±0.03%/°C (0~50°C)
10% When powered on or off
Shut down at 140%Vo and latch off
o/p voltage, re-power on to recover
Constant current limiting
≤10W with 3 in 1 Dimmer Function
Hiccup Auto Recover w/o Dimmer Shut down and latch off o/p
voltage
PHYSICAL SPECIFICATIONS
Size
Weight
261 x 68 x 40 mm
44.234 oz (1254g)
WWW.ASTRODYNE.COM
series
-40°C to +60 (See Derate Curve)
20~95%RH, non-condensing
-45°C to +85°C / 10~95%RH
80 °C
10~300Hz,1G ,Period for 60min,
each along X,Y,Z axes
150KHrs
IP67 without Adjustment Option IP66 with Adjustment Option
GENERAL SPECIFICATIONS
Safety (Note 5)
Isolation I/P-OP:
I/P-GND, O/P-GND:
Isolation Resistance
EMC Interference (Note 5)
EMC Emission (Note 5)
EMC Immunity (Note 5)
UL8750, IEC61347, EN55015
3.75K VAC
1.56K VAC
100MΩ/500VDC/25°C/70%RH
Compliance to EN55015,
EN55022 (CISPR22) Class B
Compliance to EN61000-3-2
Class C (≥50%load); EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11
ENV50204, EN61547, EN55024
NOTES
1. O/P Noise measured directly at the terminals at nominal load, 20MHz bandwidth by using a 12” twisted pair-wire terminated with
a 0.1uf & 47uf parallel capacitor.
2. Includes set up tolerance, line regulation and load regulation
3. Constant current operation region is within 60% ~100% rated output
voltage. This is the suitable operation region for LED related
applications, but please reconfirm special electrical requirements for
some specific system designs.
4. Derating may be needed under low input voltages. Please check the
Static Characteristics for more details.
5. Safety and EMC design refer to EN60598-1, subject 8750(UL),
CNS15233, GB7000.1, FCC part18. The power supply is considered a
component that will be installed in the end application. EMC
performance be must re-qualified in the completed installation.
6. Cold start. Turning ON/OFF the power supply may lead to increase of
set up time
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
DR300
3 0 0 W S i n g l e O u t put LED Driver with PFC
series
Mechanical Outline -DR300
ACL(BLACK)
260
233
13.5
ACN(WHITE)
(GREEN)
Tcase
114
220±20
34
10.5
67.3
AC Input(3*AWG#18)
34
Dimming wires(2*AWG#22)
520±20
12±0.5
DC Output(2*AWG#18)
4.5
12±0.5
Unit:mm
227
220±20
243.5
AGND(BLACK)
PVR (ORANGE)
V+(RED)
V-(BLACK)
12±0.5
47.7
Tcase: Max. Case Temperature
Power's internal temperature is 15°C warmer than case temperature.
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
DR300
3 0 0 W S i n g l e O u t put LED Driver with PFC
series
Part number code
D
R
300 -
143 S 210 TC
A
Optional mode: output voltage and current are
adjustable (IP66 rated)
Lighting products
Optional mode:two letters
Default:no additional features,output voltage
and current can regulation
TC: 3 in 1 dimming function (PWM, resistance, voltage)
R:High performance LED driver
H:High efficiency LED driver
E:Economical LED driver
Output current (*10mA):three numbers
Filled 0 in front of it when less than 3;
four numbers are available if needed.
For example:1250 means 12,500mA,
035 means 350mA
Output power(W): three numbers
Filled 0 in front of it when less than 3.
Output channel:one letter or number
S: Single channel output
D: Double channel output
T: Triple channel output
Q: Quadruple channel output
F: Quintuple channel output H: sextuple channel output
Output voltage(V):three numbers
Filled 0 in front of it when less than 3.
For example:105 means 105V ,024means24V
For example: DR300-143S210TC means it is a high performance LED driver, output power 300W, output
voltage 143Vdc, output current 2100mA ,single output,with 3 in 1 dimming function.
wiring diagram
ACL
BROWN
ACN BLUE
CE
CE
V- BLUE
GND YELLOW GREEN
OR
OR
ACL BLACK
ACN WHITE
V+ BROWN
UL
GND GREEN
WWW.ASTRODYNE.COM
OUTPUT WIRES
INPUT WIRES
LED DRIVER
DIMMING WIRES
UL
V+ RED
V- BLACK
TC
AGND BLACK
PVR ORANGE
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
DR300
3 0 0 W S i n g l e O u t put LED Driver with PFC
series
Derating Curve
Derating Curve
110VAC
~277VAC
100
load(%)
80
100VAC
60
40
20
0
-40
-25
-5
0
15
30
50
60
70
Ambient Temperature (˚C )
Static Characteristics
Derating Curve
100
load(%)
80
60
40
20
0
90
100
110
180
210
240
260
277
Input Voltage(V)
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
DR300
D R 3Series
0 0 series
®
3 0 0 W S i n g l e O u t put LED Driver with PFC
300W Single Output LED Driver
■Power Factor Characteristic(DR300-143S210)
1.02
1.00
PF
0.98
110VAC
0.96
230VAC
0.94
277VAC
0.92
50%
60%
70%
80%
90%
100%
LOAD
■EFFICIENCY vs LOAD(DR300-143S210)
95
EFFICIENCY
90
85
80
110VAC
75
230VAC
70
277VAC
65
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
VO
■Typical LED power supply I-V curve
100%
(A)
Constant voltage area
60%
WWW.ASTRODYNE.COM
(C)
Non-Dimming hiccup
protection area
50%
(B)
Constant
current area
(D)
Dimming constant
current area
ASTRODYNE USA: 1-800-823-8082
100%
IO ASTRODYNE PACIFIC: 886-2-26983458
®
DH300Series
D R 3 0 0 series
3 0 0 W S i n g l e O u t put LED Driver with PFC
300W Single Output LED Driver
■Power Factor Characteristic(DR300-024S1250)
1.02
PF
0.97
0.92
110VAC
230VAC
0.87
277VAC
0.82
50%
60%
70%
80%
90%
100%
LOAD
■EFFICIENCY vs LOAD(DR300-024S1250)
95
EFFICIENCY
90
85
80
110VAC
75
230VAC
70
277VAC
65
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
VO
■Typical LED power supply I-V curve
100%
(A)
Constant voltage area
60%
(C)
Non-Dimming hiccup
protection area
50%
(D)
Dimming constant
current area
100%
IO
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
WWW.ASTRODYNE.COM
Rev.1 MAR.2012
(B)
Constant
current area
www.tonlier.com
5
DR300
3 0 0 W S i n g l e O u t put LED Driver with PFC
series
Non-isolated 3 in 1 dimming function
Reference resistance value for output current adjustment (Typical)
Resistance
value
Single driver
Multiple drivers
Percentage of rated current
10KΩ
20KΩ
30KΩ
40KΩ
50KΩ
60KΩ
70KΩ
80KΩ
90KΩ
100KΩ
OPEN
10KΩ /N 20KΩ /N 30KΩ /N 40KΩ /N 50KΩ /N 60KΩ /N 70KΩ /N 80KΩ /N 90KΩ /N 100KΩ /N OPEN
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
98%∼108%
1 ~ 10V dimming function for output current adjustment (Typical)
Dimming value
Percentage of rated current
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V OPEN
10%
20%
30%
40%
50%
60%
70%
80%
90% 100% 98%∼108%
10V PWM signal for output current adjustment (Typical): Frequency range: 100HZ ~ 3KHz
Duty value
Percentage of rated current
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
60%
60%
70%
70%
80%
80%
90%
90%
100% OPEN
100% 98%∼108%
Input and output Dielectric strength
Isolation
Input Wires
Output Wires
Isolated Dimming
Control Wires
Chassis
Input Wires
NA
3750
2000
2000
Output Wires
3750
NA
2000
2000
Isolated Dimming
Control Wires
2000
2000
NA
2000
Chassis
2000
2000
2000
NA
Fixed derating-cutoff type temperature protection
Output Power
100%
≤20%
80∼85˚C
90∼105˚C Case temperature
(TC)
WWW.ASTRODYNE.COM
4812
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458