DR200 200W S i n g l e Ou t put LE D D ri v er w it h P FC series Constant Voltage and Current Output Universal AC Input of 100~305VAC Built-in Active PFC function Protections: Short Circuit/Over Voltage/Over Load/Over Temperature Cooling by Free Air Convection 3 in 1 Dimming Function (optional) Adjustable Output Voltage and Current (optional) Suitable for LED Lighting and LED Electronic Display Applications IP66 ~ IP67 Design for Indoor or Outdoor Installations Suitable for Dry / Damp / Wet Locations 5 Year Warranty IP67 Model Number Output Voltage Rated Output Amps Efficiency Constant Current Range (Note 3) DR200-286S070 DR200-191S105 DR200-143S140 DR200-115S175 DR200-096S210 286Volts(DC) 191Volts(DC) 143Volts(DC) 115Volts(DC) 96Volts(DC) WWW.ASTRODYNETDI.COM 0.700 Amps 1.05 Amps 1.4 Amps 1.75 Amps 2.1 Amps 92% 92% 92% 91% 91% 172~286 Volts(DC) 115~191 Volts(DC) 86~143 Volts(DC) 69~115 Volts(DC) 58~96 Volts(DC) ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR200 200W S i n g l e Ou t put LE D D ri v er w it h P FC INPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Input Voltage Range (Note 4) 100-305VAC Oper. Temperature Frequency Range 47-63 Hz (50/60 Hz nominal) Operating Humidity Input Current 2.4 Amps max @ 100VAC Storage Temp. / Humidity 1.2 Amps max @ 220VAC Max. Case Temperature Leakage Current <0.75mA/230VAC Vibration <0.5mA/120VAC Inrush Current 65A MTBF Power Factor 0.96 (220Vac) IP Rating OUTPUT SPECIFICATIONS series -40°C to +60 (See Derate Curve) 20~95%RH, non-condensing -45°C to +85°C / 10~95%RH 80 °C 10~300Hz,1G ,Period for 60min, each along X,Y,Z axes 300KHrs IP67 without Adjustment Option IP66 with Adjustment Option GENERAL SPECIFICATIONS Voltage and Current See Selection Chart Constant Current Range See Selection Chart Safety (Note 5) UL8750, IEC61347, EN55015 Dimming Current Range 10~100% rated output current, Isolation I/P-OP: 3.75K VAC ≥50% rated output voltage I/P-GND, O/P-GND: 1.56K VAC Voltage Tolerance (Note 2) ±5% Isolation Resistance 100MΩ/500VDC/25°C/70%RH Line Regulation ±2% EMC Interference (Note 5) Compliance to EN55015, Load Regulation ±5% EN55022 (CISPR22) Class B Efficiency See Selection Chart EMC Emission (Note 5) Compliance to EN61000-3-2 Ripple/Noise (Note 1) ≤10% Output Voltage Class C (≥50%load); EN61000-3-3 Turn-on Delay Time (Note 6) 3S, max. EMC Immunity (Note 5) Compliance to Temperature Coefficient ±0.03%/°C (0~50°C) EN61000-4-2,3,4,5,6,8,11 Output Overshoot / Undershoot 10% When powered on or off ENV50204, EN61547, EN55024 Over Voltage Protection Shut down at 140%Vo and latch off o/p voltage, re-power on to recover NOTES Over Current Protection (Note 3) Constant current limiting Short Circuit Protection ≤10W with 3 in 1 Dimmer Function 1. O/P Noise measured directly at the terminals at nominal load, Hiccup Auto Recover w/o Dimmer 20MHz bandwidth by using a 12” twisted pair-wire terminated with Over Temperature Protection Shut down and latch off o/p a 0.1uf & 47uf parallel capacitor. voltage 2. Includes set up tolerance, line regulation and load regulation 3. Constant current operation region is within 60% ~100% rated output PHYSICAL SPECIFICATIONS voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for Size 241 x 68 x 40 mm some specific system designs. Weight 46.56 oz (1320g) 4. Derating may be needed under low input voltages. Please check the Static Characteristics for more details. All specifications are typical at nominal input, full load, and 25°C unless other5. Safety and EMC design refer to EN60598-1, subject 8750(UL), wise noted CNS15233, GB7000.1, FCC part18. The power supply is considered a component that will be installed in the end application. EMC performance be must re-qualified in the completed installation. 6. Cold start. Turning ON/OFF the power supply may lead to increase of set up time WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ® DR200 Series DR 2 0 0 series 200W S i n g l e Ou t put LE D D ri v er w it h P FC 200W Single Output LED Driver ■Mechanical Outline ACL（BLACK） ACN（WHITE） （GREEN） 241 12 216 Unit：mm Vo Adj. Io Adj. AC Input(3*18AWG) V+(RED) V-(BLACK) 12±0.5 4.5 12±0.5 108 34 34 Tcase 67.3 7.5 DC Output(2*18AWG ) 230 220±20 520±20 40 ※Tcase: Max. Case Temperature ※Power's internal temperature is 15 ℃ warmer than case temperature. NOTE: NO. DC Output Current Wire Number Wire specfication 1 ≤6A 1 2×AWG18 2 6~8A(Including 8A) 1 2×AWG16 ■Isolated intelligent dimming and control ●intelligent dimming ●LED Light attenuation compensation ●Derating Temperature Protection WWW.ASTRODYNETDI.COM Programming Tool：Please refer to www.tonlier.com for downloading . ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR200 200W S i n g l e Ou t put LE D D ri v er w it h P FC series Part number code D R 200 - 024 S 833 TC A Optional mode: output voltage and current are adjustable (IP66 rated) Lighting products Optional mode：two letters Default：no additional features，output voltage and current can regulation TC: 3 in 1 dimming function (PWM, resistance, voltage) R：High performance LED driver E：Economical LED driver Output current(*10mA) ：three numbers Filled 0 in front of it when less than 3; four numbers are available if needed. For example:833 means 8330mA，035 means 350mA Output power(W): three numbers Filled 0 in front of it when less than 3. Output channel：one letter or number S: Single channel output D: Double channel output T: Triple channel output Q: Quadruple channel output F: Quintuple channel output H: sextuple channel output Output voltage(V)：three numbers Filled 0 in front of it when less than 3. For example:105 means 105V ，024means24V For example: DR200-024S833TC means it is a high performance LED driver, output power 200W, output voltage 24Vdc, output current 8330mA ，single output，with 3 in 1 dimming function. . wiring diagram ACL BROWN ACN BLUE CE CE V- BLUE GND YELLOW GREEN OR OR ACL BLACK ACN WHITE V+ BROWN UL OUTPUT WIRES INPUT WIRES GND GREEN WWW.ASTRODYNETDI.COM LED DRIVER DIMMING WIRES UL V+ RED V- BLACK TC AGND BLACK PVR ORANGE ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR200 200W S i n g l e Ou t put LE D D ri v er w it h P FC series Derating Curve Derating Curve 110VAC ~277VAC 100 load（%） 80 100VAC 60 40 20 0 -40 -25 -5 0 15 30 50 60 70 Ambient Temperature （˚C ） Static Characteristics Derating Curve 100 load（%） 80 60 40 20 0 90 100 110 180 210 240 260 277 Input Voltage（V） WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR200 200W S i n g l e Ou t put LE D D ri v er w it h P FC series Power Factor Characteristic(DR200-024S833) 1.03 PF 0.98 0.93 110VAC 230VAC 0.88 277VAC 0.83 50% 60% 70% 80% 90% 100% LOAD EFFICIENCY vs LOAD(DR200-024S833) 94 EFFICIENCY 89 84 79 110VAC 74 230VAC 69 277VAC 64 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD VO Typical LED power supply I-V curve 100% (A) Constant voltage area 60% (C) Non-Dimming hiccup protection area 50% WWW.ASTRODYNETDI.COM (B) Constant current area (D) Dimming constant current area 100% IO ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 DR200 200W S i n g l e Ou t put LE D D ri v er w it h P FC series Non-isolated 3 in 1 dimming function Reference resistance value for output current adjustment (Typical) Resistance value Single driver Multiple drivers Percentage of rated current 10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ OPEN 10KΩ /N 20KΩ /N 30KΩ /N 40KΩ /N 50KΩ /N 60KΩ /N 70KΩ /N 80KΩ /N 90KΩ /N 100KΩ /N OPEN 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 98%～108% 1 ~ 10V dimming function for output current adjustment (Typical) Dimming value Percentage of rated current 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 98%～108% 10V PWM signal for output current adjustment (Typical): Frequency range: 100HZ ~ 3KHz Duty value Percentage of rated current 10% 10% 20% 20% 30% 30% 40% 40% 50% 50% 60% 60% 70% 70% 80% 80% 90% 90% 100% OPEN 100% 98%～108% Input and output Dielectric strength Isolation Input Wires Output Wires Isolated Dimming Control Wires Chassis Input Wires NA 3750 2000 1560 2000 Output Wires 3750 NA 2000 2000 Isolated Dimming Control Wires 2000 2000 NA 2000 Chassis 1560 2000 2000 2000 NA Fixed derating-cutoff type temperature protection Output Power 100% ≤20% 80～85˚C 90～105˚C Case temperature (TC) WWW.ASTRODYNETDI.COM 2713 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458