ASD05H I s o l a t e d a n d R e gulated 5 WATT Open Frame DC/DC Converter series Wide 4 : 1 Input Range High Efficiency Regulated Outputs 1500V Isolation Integral Finned Heatsink EN60950-1 & UL60950-1 Approved Unit measures 1”W x 2”L x 0.41”H Model Number Output Voltage Output Amps Input Range SINGLE OUTPUT ASD05H-12S3 3.3 VDC ASD05H-48S3 ASD05H-12S5 5 VDC ASD05H-48S5 ASD05H-12S9 9 VDC ASD05H-48S9 ASD05H-12S12 12 VDC ASD05H-48S12 ASD05H-12S15 15 VDC ASD05H-48S15 1.5 1.5 1 1 0.55 0.55 0.42 0.42 0.33 0.33 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC DUAL OUTPUT ASD05H-12D5 +/-5 VDC ASD05H-48D5 ASD05H-12D12 +/-12 VDC ASD05H-48D12 ASD05H-12D15 +/-15 VDC ASD05H-48D15 +/-0.5 +/-0.5 +/-0.21 +/-0.21 +/-0.17 +/-0.17 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 I s o l a t e d a n d R e gulated 5 WATT Open Frame DC/DC Converter series GENERAL SPECIFICATIONS INPUT SPECIFICATIONS Input Voltage, Nominal Input Voltage Ranges Input Surge Voltage ASD05H 12VDC 9-36 50V (12V Models), * 100V (48V Models), * 10 mS duration, min. 48VDC 18-75 VDC OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Preset Accuracy Singles: +/- 3% max. Duals: +/- 4% max. Cross Regulation (Duals) 5-8% typ. Load Regulation singles: +/- 0.5% 20% - FL duals: +/-1%, +/-3% (5V mod) Line Regulation singles: +/- 0.5% duals: +/- 1% Ripple/Noise (Pk-Pk, typ) Single 3.3V 100mV Single 5, 9,12, 15V 50mV Dual 5V 150mV (12Vin) 100mV (48Vin) Dual 12, 15V 50mV Overvoltage Protection Clamp, 130-150% * Short Circuit Protection Clamp, need to release load On/Off Control Shutdown Idle Current Input-Out Isolation In/Out Capacitance Efficiency ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Relative Humidity Storage Temperature Maximum Heatsink Temp MTBF Shock/Vibration Safety UL/cUL: UL-EU: * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM -25 to +71°C(FL) 0 to 95%, non-cond -40 to +125°C * 110°C * 1,000,000 Hrs Mil Std 217, 25°C To MIL-STD 810°C UL60950-1 2nd ed./ CAN/CSA C22.2 60950-1 2nd ed. EN60950-1 2nd ed. PHYSICAL SPECIFICATIONS Heatsink Material Construction Weight All specifications are typical at nominal input, full load, and 25°C unless otherwise noted (Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF 15mA 1500VDC (48V) 500 VDC (12V) 1000 pF 82%, typ Aluminum Open Frame 0.57 oz, (16g) Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASD05H I s o l a t e d a n d R e gulated 5 WATT Open Frame DC/DC Converter series MECHANICAL DIMENSIONS .41in 10.52mm max Pin# Single Outputs Dual Outputs .24in 6.0mm min 3 1.00in 25.4mm .60in 15.24mm .40in 10.16mm 1 2 4 6 5 .50in 12.7mm .60in 15.24mm 1.40in 35.56mm 2.00in 50.8mm .10in 2.54mm .90in 22.86mm 1 + Input + Input 2 - Input - Input 3 4 5 + Output N/A - Output + Output Common - Output 6 Control Control .10in 2.54mm TOLERANCES : .XX 0.5mm(0.02in) : .XXX 0.25mm(0.01in) 0H_B DESCRIPTION DATE Change height from 9.52 to 10.52mm OUTPUT DERATING CURVE 2012/10/29 DIMENSION X<8 8<X<25 25<X<100 100<X<300 300<X<800 120 Output Power (%) 100 UNIT SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) SIZE ANGULAR SCALE PIERCING ±0.1 ±0.1 BENDING ±0.15 ±0.2 ±0.15 ±0.2 ±0.25 ±0.3 ±1° CHECKED ±0.3 ±0.5 ±1.5° APPROVED SHEET ±0.3° ±0.5° Projection ±0.5° DRAWN mm A4 MATERIAL OF MODEL NO. 1:1 PART NO. TITLE ASD10H 2D outline drawings Erica 80 60 40 20 0 0 10 20 30 40 50 Ambient Temp °C WWW.ASTRODYNE.COM 60 70 80 90 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458