OFM15 1 5 W U l t r a m i n i a t ure Open Frame Switching Power Supplies series Universal 90-264VAC Input High Efficiency Regulated Outputs 3000V Isolation Single and Dual Outputs UL60950-1, EN60950-1 & IEC60950-1 Approved 1.89”W x 2.76”L x 1.04”H Model Number Output Voltage Output Amps(max) (pk) SINGLE OUTPUT OFM-1500 OFM-1501 OFM-1502 OFM-1503 OFM-1505 3.3 VDC 5 VDC 12 VDC 15VDC 24VDC 3.5A 3A 1.25A 1A 0.63A 3.8A 3.6A 1.5A 1.25A 0.75A DUAL OUTPUT OFM-1506 OFM-1507 +/-12VDC +/-15VDC +/-0.63A +/-0.5A +/-0.8A +/-0.65A WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 OFM15 1 5 W U l t r a m i n i a t ure Open Frame Switching Power Supplies INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: GENERAL SPECIFICATIONS 85-265 VAC 47-440 Hz 20A@100V, 40A@200V Input * OUTPUT SPECIFICATIONS Voltage and Current Load Regulation (20%-FL) Line Regulation Cross Regulation (Duals) Preset Accuracy DC Voltage Adjust (typ) Temperature Coefficient Ripple/Noise Over Voltage Protection Over Temp. Protection Short Circuit Protection Hold Up Time series See Selection Chart Singles: +/- 3%, Duals: +/- 3% Singles +/- 0.1~1%, typ Duals +/- 0.3~1%, typ 2% 1% +/- 6% of FS (Primary) +/-0.03%/°C 100mV Pk-Pk, typ Clamp, 130-150% * Latching, Cool and Repower Continuous, self-recovering 20 mS, typ Input-Out Isolation I/P-Ground O/P-Ground Efficiency Switching Frequency Safety UL/cUL: UL-EU: UL File #: CE: CB: PHYSICAL SPECIFICATIONS Size Construction Weight * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM 1.89” x 2.76” x 1.04” Open Frame 2.5oz (70g) ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Relative Humidity EMC MTBF All specifications are typical at nominal input, full load, and 25°C unless otherwise noted 3KVAC 2500VAC 1000VAC 75%~78%, typ 100Khz, (fixed, typical) UL60950-1 2nd ed. EN60950-1 2nd ed. E167432 EN 60601-1-2 IEC 60950-1:2005 (2nd Edition) 0 to +70°C (See Derate) -25 to +71°C * 0 to + 95%, non-cond * FCC/A, VDE 0871/A (Mil Std 217, 25°C) 559,000 Hrs Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 OFM15 1 5 W U l t r a m i n i a t ure Open Frame Switching Power Supplies series OUTPUT DERATING CURVE 100 90 Load, % 80 70 60 50 40 30 20 0 10 20 30 40 50 60 70 Ambient Temperature, °C MECHANICAL DIMENSIONS -VOUT ACN 1.89in 48mm COM +VOUT .945in 24mm .492in 12.5mm ACL .157in 4mm Pin # Single Outputs Dual Outputs 1 2 6 8 9 AC Line AC Neutral + Output NC - Output AC Line AC Neutral +Output Common - Output Length & Width tolerance : .157in 4mm .945in 24mm 1.398in 35.5mm 2.44in 62mm 2.75in 69.9mm .874in 22.2mm max .17in 4.3mm .07in 1.78mm .04in 1.02mm .15in 3.81mm .063in 1.6mm 0.1mm (0.004in ) Pin : 1.0x10.2x0.6 copper core with Ni-plating DRAWING NO. REV OFM1506_D DESCRIPTION WWW.ASTRODYNE.COM A1 Height changes from 25mm to 26.5mm DATE SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) 2012/8/3 DIMENSION X<8 3912 8<X<25 25<X<100 100<X<300 300<X<800 UNIT SIZE mm A4 MATERIAL PART NO. 1:1 ASTRODYNE USA: 1-800-823-8082 MODEL NO. ASTRODYNE PACIFIC: OF 886-2-26983458 SCALE PIERCINGBENDING ANGULAR SHEET ±0.1 ±0.15 ±0.3° ±0.5° Projection ±0.1 ±0.2 ±0.5° DRAWN ±0.15 ±0.2 ±0.25 ±0.3 ±1° CHECKED ±0.3 ±0.5 ±1.5° APPROVED TITLE Erica OFM 2D out