ASA150 1 5 0 Wa t t E x t e r n al Switching Power Adapters series Universal Input IEC320 Input Inlet Efficiency to 93% UL, CE ASA Products Meet CEC Level V standards FCC 15B, EN55022B EMC 1.48”x 2.56”x 6.65” Model Number Output Voltage Output Amps OVP Efficiency SINGLE OUTPUT ASA150-12(T)* ASA150-19(T)* ASA150-24(T)* ASA150-36(T)* ASA150-48(T)* 12 19 24 36 48 12.5 7.89 6.25 4.17 3.13 16V 26V 33V 50V 60V 91% @ 230VAC input 92% @ 230VAC input 92% @ 230VAC input 92.5% @ 230VAC input 93% @ 230VAC input *Note: These products are available with optional 3 Pole IEC320-C6 Input Inlets (see MECHANICAL DIMENSIONS). To receive this option, simply add the letter “T” to the end of the Model Number. (i.e. ASA150-12T) Two pole IEC320-C8 are standard. WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASA150 1 5 0 Wa t t E x t e r n al Switching Power Adapters INPUT SPECIFICATIONS Input Voltage Range Frequency Range Input Current 90-264 VAC 47-63 HZ 2.0A @ 100VAC INPUT 0.8A @ 230VAC INPUT OUTPUT SPECIFICATIONS Voltage and Current Over Voltage Protection Over Current Protection (Note 1) Over Temperature Protection (Note 2) Load Regulation Line Regulation Ripple/Noise (Note 3) Turn-on Delay Time Short Circuit Protection (Note 4) Hold Up Time Rise Time Fall Time Output Overshoot / Undershoot Load Dynamic Response (Note 5) Output Deviation Setting Time See Model Chart See Model Chart 120%-170% Io 125°C 5% 0.5% 1.5% Vo pk-pk 2S @ full load and 90Vac input 16mS @ full load and over the entire input range 25mS 30mS @ full load 10% When power on or off 5%V 10mS GENERAL SPECIFICATIONS Efficiency No load Power Dissipation See Model Chart ≤ 0.5 W @ 115Vac input ≤ 0.5 W @ 230Vac input Safety CUL UL60950-1 CE EN60950-1 EMI StandardsEN55022:1998, +A1:2000 +A2:2003 Class B; CISPR 22:2003, Class B AS/NZS CISPR 22: 2004, Class B All specifications are typical at nominal input, 100% load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM EMS Standards series EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 EN 61000-4-11 PHYSICAL SPECIFICATIONS Size Inches 6.65”x 2.56”x 1.48” Milimeters 169x 65x 37.5 Output Connector 4 Pin DIN Weight LBS 1.26 Grams 570 ENVIRONMENTAL SPECIFICATIONS Oper. Temperature (Note 6) Storage Temperature (Note 7) MTBF 0C to +40C -20C to +80C 150,000 hours Notes: 1. Hiccup mode. The power supply shall self recover when the fault condition is removed. 2. Maximum temperature of components inside the case. 3. Measured by 20MHz bandwidth oscilloscope and the output paral- leled a 0.1 uF ceramic capacitor and a 10 uF electrolytic capacitor. 4. No damage shall occur when the output is operating in a short circuit condition. The power supply shall self recover when the fault condition is removed. 5. R/S: 1 A/ uS Load: 25% ~ 75% full load. 6. Humidity: 10% RH to 90% RH. 7. 5% RH to 95% RH. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 5 0 Wa t t E x t e r n al Switching Power Adapters ASA150 series MECHANICAL DIMENSIONS 4-PIN POWER DIN PLUG AC Input IEC 320-C6 Inlet For Class I version AC Input IEC 320-C8 Inlet For Class II version 1 3 2 4 PIN FUNCTION Output + 1 Output + 2 Return 3 Return 4 Chassis part to output connector: Equivalent to CUI INC. PD-40 or PD-40S. WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458