SPU25A 2 5 Wa t t D e s k t o p Switching Power Adapters series Universal 90-264VAC Input IEC-320-C14 Input Receptacle Single Outputs from 5 to 48VDC LPS Efficiency Level IV or V Splash Proof Case 4.11” x 1.65” x 1.22” Model Number Output Watts Output Voltage Output Amps Total Regulation SPU25A-102 SPU25A-103 SPU25A-104 SPU25A-105 SPU25A-106 SPU25A-107 SPU25A-108 SPU25A-109 SPU25A-110 SPU25A-111 16.5 20 22 25 25 25 25 25 25 25 5V 6V 10V 12V 15V 18V 24V 30V 36V 48V 3.3A 3.33A 2.2A 2.08A 1.66A 1.38A 1.04A 0.83A 0.69A 0.52A 5% 5% 5% 5% 5% 5% 3% 3% 3% 3% WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 SPU25A 2 5 Wa t t D e s k t o p Switching Power Adapters INPUT SPECIFICATIONS Input Voltage Range Frequency Range Input Current Max. Power Consumption No Load Inrush Current, typ (Cold Start) Leakage Current GENERAL SPECIFICATIONS 90-264 VAC (Universal) 47-63 Hz Low Line (115VAC) 0.4A High Line (230VAC) 0.25A 240VAC 0.5W max. Low Line (115VAC) 15A max. High Line (230VAC) 30A max. 0.75mA MAX. @ 240 VAC, FL Input-Out Isolation Input-Ground Isolation Isolation Resistance Efficiency (FL, 230Vin) Safety See Selection Charts 0 to FL Rating +/- 5%, max. +/- 1%, max. 100Vin, FL to 1/2L 4mS +/-0.04%/°C, typ FL, 90Vin 1% Pk-Pk, max. 110-150% * 110Vin, FL 12-16mS max. 100Vin, FL 0.5S max. ENVIRONMENTAL SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage and Current Output Power Range Load Regulation (230Vin) Line Regulation Transient Response Max. Temperature Coefficient Ripple/Noise Over Current Protection Hold Up Time Start Up series NOTE: Low cost 3 Wire IEC320/C13 (Part Number ACCRD-C13) Input Power Cords are available for these products. Inquire to the Astrodyne Sales Depart. 3000 VAC 1500 VAC 50 MΩ min. 85%, typ. (c)UL60950-1, EN60950-1 PHYSICAL SPECIFICATIONS Size Construction Weight Oper. Temperature Storage Temperature Relative Humidity EMC MTBF Efficiency Level 4.11” x 1.65” x 1.22” Desktop Style 6oz (170g) 0 to +40°C (FL) * 50% Load @ 70°C (See Derate Curve) -40 to +85°C * 5% to 95%, non-cond * 110Vin: FCC Part 15 Class B 220Vin: CISPR-22 Class B 300,000 Hrs SPU25A-102-104: IV SPU25A-105~111: V DERATE CURVE All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 SPU25A 2 5 Wa t t D e s k t o p Switching Power Adapters series MECHANICAL DIMENSIONS -Vout +Vout DC OUTPUT CONNECTIONS Coaxial Plug 5.5mm outer diameter 2.1mm inner diameter, female 11mm length, center “+” SPU25-102~103 Output Cord Length 48” 16AWG SPU25-105 Output Cord Length 48” 18 AWG SPU25-105~111 Output Cord Length 72” 18 AWG WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458