CABINET add-on Cable ducts and DIN rails Mounting material for control cabinets The wide range of DIN rails and cable ducts enables flexible and optimum use of the available space in your control cabinet. The cutting devices can be used to assemble DIN rails and cable ducts individually and cost-effectively. The wide, angled heads of the cable duct webs ensure easy assembly and a secure hold of the cover. Fast and reliable cutting The cable duct cutter can be used to cut channels and covers with a width of up to 125 mm and a wall thickness of up to 2.5 mm in seconds, burr-free and noncutting. The spring-loaded knife protection provides the necessary safety. PHOENIX CONTACT Toolless assembly The lateral webs in the cable duct can be snapped out easily by hand, burr-free and flush with the bottom. T-connections and cross-connections can thus be made fast and without transitions. Neat wiring Attaching special clips to the lateral webs of the cable duct ensures a secure hold of the installed conductors. Clear and fast wiring is thus possible in the control cabinet, even at a later date. Gray cable ducts Cable duct, consisting of upper and lower part Approvals: Material: Inflammability as per UL 94: Slot distance: Slot width: Temperatureresistant: Dimensions Wx H x L [mm] [inch] 0.98 x 0.98 x 78.72 CD 25x25 3240187 25 x 40 x 2000 0.98 x 1.57 x 78.72 CD 25x40 3240188 25 x 60 x 2000 0.98 x 2.36 x 78.72 CD 25x60 3240191 25 x 80 x 2000 0.98 x 3.15 x 78.72 CD 25x80 3240197 30 x 40 x 2000 1.18 x 1.57 x 78.72 CD 30x40 3240278 30 x 60 x 2000 1.18 x 2.36 x 78.72 CD 30x60 3240280 30 x 80 x 2000 1.18 x 3.15 x 78.72 CD 30x80 3240282 30 x 100 x 2000 1.18 x 3.94 x 78.72 CD 30x100 3240283 40 x 40 x 2000 1.57 x 1.57 x 78.72 CD 40x40 3240189 40 x 60 x 2000 1.57 x 2.36 x 78.72 CD 40x60 3240192 40 x 80 x 2000 1.57 x 3.15 x 78.72 CD 40x80 3240198 40 x 100 x 2000 1.57 x 3.94 x 78.72 CD 40x100 3240294 60 x 40 x 2000 2.36 x 1.57 x 78.72 CD 60x40 3240190 60 x 60 x 2000 2.36 x 2.36 x 78.72 CD 60x60 3240193 60 x 80 x 2000 2.36 x 3.15 x 78.72 CD 60x80 3240199 60 x 100 x 2000 2.36 x 3.94 x 78.72 CD 60x100 3240263 80 x 25 x 2000 3.15 x 0.98 x 78.72 CD 80x25 3240281 80 x 40 x 2000 3.15 x 1.57 x 78.72 CD 80x40 3240335 80 x 60 x 2000 3.15 x 2.36 x 78.72 CD 80x60 3240194 80 x 80 x 2000 3.15 x 3.15 x 78.72 CD 80x80 3240200 80 x 100 x 2000 3.15 x 3.94 x 78.72 CD 80x100 3240264 100 x 40 x 2000 3.94 x 1.57 x 78.72 CD 100x40 3240279 100 x 60 x 2000 3.94 x 2.36 x 78.72 CD 100x60 3240195 100 x 80 x 2000 3.94 x 3.15 x 78.72 CD 100x80 3240201 100 x 100 x 2000 3.94 x 3.94 x 78.72 CD 100x100 3240205 120 x 60 x 2000 4.72 x 2.36 x 78.72 CD 120x60 3240196 120 x 80 x 2000 4.72 x 3.15 x 78.72 CD 120x80 3240202 Dimensions W x H x L [mm] [inch] 25 x 2000 0.98 x 78.72 CD COVER 25 3240285 30 x 2000 1.18 x 78.72 CD COVER 30 3240295 40 x 2000 1.57 x 78.72 CD COVER 40 3240286 60 x 2000 2.36 x 78.72 CD COVER 60 3240287 PVC 80 x 2000 3.15 x 78.72 CD COVER 80 3240288 V0 100 x 2000 3.94 x 78.72 CD COVER 100 3240289 - 5 up to + 60 °C 120 x 2000 4.72 x 78.72 CD COVER 120 3240290 AC PVC V0 6.5 mm 6 mm - 5 up to + 60 °C Profiles for gray cable ducts Material: Inflammability as per UL 94: Temperatureresistant: Accessories 2 Type Order No. Order No. Description Type 1?Profile cutter, for cutting cable ducts and their covers, as well as other plastic profiles, with metric measuring bar PPS CD M Order No. 1207569 2 Spare knife, for PPS CD M PPS CD BLADE 1207572 3 Spare counter support (grip protection), for PPS CD M PPS CD M COHO 1208995 4 Cable duct scissors, for cutting of cable ducts and their covers and profiles made of plastic, 45° limit stop also for miter cuts, cutting width 75 mm CUTFOX-CD 1212474 4 3 1 Weight: Length - Measuring bar: - Hand lever: Wall thickness: Cutting width: 25 x 25 x 2000 Type 19 kg 1000 mm 500 mm up to 3 mm 125 mm Blue and white cable ducts Cable duct, consisting of upper and lower part AC Approvals: Material: Inflammability as per UL 94: Slot distance: Slot width: Temperatureresistant: PVC V0 6.5 mm 6 mm - 5 up to + 60 °C Profiles for blue cable ducts Dimensions W x H x L [mm] [inch] 0.98 x 0.98 x 78.72 CD 25x25... 3240301 3240616 25 x 40 x 2000 0.98 x 1.57 x 78.72 CD 25x40... 3240302 3240617 25 x 60 x 2000 0.98 x 2.36 x 78.72 CD 25x60... 3240303 3240618 25 x 80 x 2000 0.98 x 3.15 x 78.72 CD 25x80... 3240304 3240619 30 x 40 x 2000 1.18 x 1.57 x 78.72 CD 30x40... 3240305 3240620 30 x 60 x 2000 1.18 x 2.36 x 78.72 CD 30x60... 3240306 3240621 30 x 80 x 2000 1.18 x 3.15 x 78.72 CD 30x80... 3240307 3240622 30 x 100 x 2000 1.18 x 3.94 x 78.72 CD 30x100... 3240308 3240623 40 x 40 x 2000 1.57 x 1.57 x 78.72 CD 40x40... 3240309 3240624 40 x 60 x 2000 1.57 x 2.36 x 78.72 CD 40x60... 3240310 3240625 40 x 80 x 2000 1.57 x 3.15 x 78.72 CD 40x80... 3240311 3240626 40 x 100 x 2000 1.57 x 3.94 x 78.72 CD 40x100... 3240312 3240627 60 x 40 x 2000 2.36 x 1.57 x 78.72 CD 60x40... 3240313 3240628 60 x 60 x 2000 2.36 x 2.36 x 78.72 CD 60x60... 3240314 3240629 60 x 80 x 2000 2.36 x 3.15 x 78.72 CD 60x80... 3240315 3240630 60 x 100 x 2000 2.36 x 3.94 x 78.72 CD 60x100... 3240316 3240631 80 x 25 x 2000 3.15 x 0.98 x 78.72 CD 80x25... 3240317 3240632 80 x 40 x 2000 3.15 x 1.57 x 78.72 CD 80x40... 3240318 3240633 80 x 60 x 2000 3.15 x 2.36 x 78.72 CD 80x60... 3240319 3240634 80 x 80 x 2000 3.15 x 3.15 x 78.72 CD 80x80... 3240320 3240635 80 x 100 x 2000 3.15 x 3.94 x 78.72 CD 80x100... 3240321 3240636 100 x 40 x 2000 3.94 x 1.57 x 78.72 CD 100x40... 3240322 3240637 100 x 60 x 2000 3.94 x 2.36 x 78.72 CD 100x60... 3240323 3240638 100 x 80 x 2000 3.94 x 3.15 x 78.72 CD 100x80... 3240324 3240639 100 x 100 x 2000 3.94 x 3.94 x 78.72 CD 100x100... 3240325 3240640 120 x 60 x 2000 4.72 x 2.36 x 78.72 CD 120x60... 3240326 3240641 120 x 80 x 2000 4.72 x 3.15 x 78.72 CD 120x80... 3240327 3240642 Dimensions W x H x L [mm] [inch] 25 x 25 x 2000 25 x 2000 Material: Inflammability as per UL 94: Temperatureresistant: Type BU BU Order No. WH Order No. WH 0.98 x 78.72 CD COVER 25... 3240330 3240645 30 x 2000 1.18 x 78.72 CD COVER 30... 3240331 3240646 40 x 2000 1.57 x 78.72 CD COVER 40... 3240332 3240647 60 x 2000 2.36 x 78.72 CD COVER 60... 3240333 3240648 PVC 80 x 2000 3.15 x 78.72 CD COVER 80... 3240334 3240649 V0 100 x 2000 3.94 x 78.72 CD COVER 100... 3240328 3240643 - 5 up to + 60 °C 120 x 2000 4.72 x 78.72 CD COVER 120... 3240329 3240644 Accessories 1 Type 2 Order No. Description Type 1?Rivet setting tool, for processing plastic shield rivets with 4 mm diameter UNIFOX-RVT PA 4 1212478 1?Rivet setting tool, for processing plastic shield rivets with 6 mm diameter UNIFOX-RVT PA 6 1212509 2 Plastic shield rivet, 4 mm diameter, for 1.5 - 6 mm material thickness, material PA RVT-PA 4 3240498 2 Plastic shield rivet, 6 mm diameter, for 2 - 8 mm material thickness, material PA RVT-PA 6 3240499 Halogen-free cable ducts Cable duct, consisting of upper and lower part Approvals: Material: Inflammability as per UL 94: Slot distance: Slot width: Temperatureresistant: AC PC/ABS V0 6.5 mm 6 mm - 25 up to + 90 °C Profiles for halogen-free cable ducts Material: Inflammability as per UL 94: Temperatureresistant: Accessories Dimensions W x H x L [mm] [inch] 0.98 x 0.98 x 78.72 CD-HF 25x25 3240340 25 x 40 x 2000 0.98 x 1.57 x 78.72 CD-HF 25x40 3240341 25 x 25 x 2000 Type Order No. 25 x 60 x 2000 0.98 x 2.36 x 78.72 CD-HF 25x60 3240342 25 x 80 x 2000 0.98 x 3.15 x 78.72 CD-HF 25x80 3240343 30 x 40 x 2000 1.18 x 1.57 x 78.72 CD-HF 30x40 3240344 30 x 60 x 2000 1.18 x 2.36 x 78.72 CD-HF 30x60 3240345 30 x 80 x 2000 1.18 x 3.15 x 78.72 CD-HF 30x80 3240346 30 x 100 x 2000 1.18 x 3.94 x 78.72 CD-HF 30x100 3240347 40 x 40 x 2000 1.57 x 1.57 x 78.72 CD-HF 40x40 3240348 40 x 60 x 2000 1.57 x 2.36 x 78.72 CD-HF 40x60 3240349 40 x 80 x 2000 1.57 x 3.15 x 78.72 CD-HF 40x80 3240350 3240351 40 x 100 x 2000 1.57 x 3.94 x 78.72 CD-HF 40x100 60 x 40 x 2000 2.36 x 1.57 x 78.72 CD-HF 60x40 3240352 60 x 60 x 2000 2.36 x 2.36 x 78.72 CD-HF 60x60 3240353 60 x 80 x 2000 2.36 x 3.15 x 78.72 CD-HF 60x80 3240354 60 x 100 x 2000 2.36 x 3.94 x 78.72 CD-HF 60x100 3240355 80 x 25 x 2000 3.15 x 0.98 x 78.72 CD-HF 80x25 3240356 80 x 40 x 2000 3.15 x 1.57 x 78.72 CD-HF 80x40 3240357 80 x 60 x 2000 3.15 x 2.36 x 78.72 CD-HF 80x60 3240358 80 x 80 x 2000 3.15 x 3.15 x 78.72 CD-HF 80x80 3240359 80 x 100 x 2000 3.15 x 3.94 x 78.72 CD-HF 80x100 3240360 3240361 100 x 40 x 2000 3.94 x 1.57 x 78.72 CD-HF 100x40 100 x 60 x 2000 3.94 x 2.36 x 78.72 CD-HF 100x60 3240362 100 x 80 x 2000 3.94 x 3.15 x 78.72 CD-HF 100x80 3240363 100 x 100 x 2000 3.94 x 3.94 x 78.72 CD-HF 100x100 3240364 120 x 60 x 2000 4.72 x 2.36 x 78.72 CD-HF 120x60 3240365 120 x 80 x 2000 4.72 x 3.15 x 78.72 CD-HF 120x80 3240366 Dimensions W x H x L [mm] [inch] Type Order No. 25 x 2000 0.98 x 78.72 CD-HF COVER 25 3240369 30 x 2000 1.18 x 78.72 CD-HF COVER 30 3240370 40 x 2000 1.57 x 78.72 CD-HF COVER 40 3240371 60 x 2000 2.36 x 78.72 CD-HF COVER 60 3240372 PC/ABS 80 x 2000 3.15 x 78.72 CD-HF COVER 80 3240373 V0 100 x 2000 3.94 x 78.72 CD-HF COVER 100 3240367 - 25 up to + 90 °C 120 x 2000 4.72 x 78.72 CD-HF COVER 120 3240368 Description Universal wire retaining clip, pre-perforated for cable duct 40, 60, 80 and 100 Type Order No. CD WR 3240284 PHOENIX CONTACT DIN rails and accessories Standard DIN rails NS… Steel zinc-plated and thick layer passivated Material: Coating: End bracket Material: Inflammability as per UL 94: Dimensions W x H x L [mm] Description Type 15 x 5.5 x 2000 Unperforated NS 15 UNPERF 2000MM 1401695 15 x 5.5 x 2000 Perforated NS 15 PERF 2000MM 1401682 35 x 7.5 x 2000 Unperforated NS 35/7,5 UNPERF 2000MM 0801681 35 x 7.5 x 2000 Perforated NS 35/7,5 PERF 2000MM 0801733 35 x 15 x 2000 Unperforated NS 35/15 UNPERF 2000MM 1201714 35 x 15 x 2000 Perforated NS 35/15 PERF 2000MM 1201730 Description Type Order No. End bracket, for screwing on NS 35 and NS 32, can be labeled with ZB, KLM, KLM-A and UBE E/UK 1201442 PA V2 Dimensions W x H x L [mm] Angled bracket 1 Description Type Order No. 1?19.7 x 35.4 x 87 Angled bracket, for fixing DIN rails at an angle of 30°, with M6 screw BG/S 1201086 2?19.7 x 35.4 x 87 Angled bracket, with a stop for DIN rails, for fixing DIN rails at an angle of 30°, with M6 screw BG/SA 1201604 1?20 x 46 x 84 Angled bracket, for fixing DIN rails at an angle of 30°, with M6 screw BG/SH 1201099 2?20 x 46 x 84 Angled bracket, with a stop for DIN rails, for fixing DIN rails at an angle of 30°, with M6 screw BG/SHA 1201594 Description Type Order No. 1?20 x 12 x 84 Flat bracket, for fixing the DIN rail 12 mm above the mounting surface, with M6 screw BG/F 1201060 2?20 x 15 x 37 Flat bracket, for fixing the DIN rail 15 mm above the mounting surface, mounting hole: 6.5 mm Ø BG/F 1 1201112 Order No. 2 Material: Coating: Steel zinc-plated and thick layer passivated Dimensions W x H x L [mm] Flat bracket 1 Material: Coating: 2 Steel zinc-plated and thick layer passivated Universal rail adapter Material: Inflammability as per UL 94: Order No. PA V2 PHOENIX CONTACT Dimensions W x H x L [mm] Description Type 43 x 19 x 10 Universal rail adapter, for NS 35… and NS 32… DIN rails, for accommodating switching devices, 10 mm wide, for M3 screws USA 10 1201578 43 x 19 x 10 Universal rail adapter, for NS 35… and NS 32… DIN rails, for accommodating switching devices, 10 mm wide, for M5 screws USA 10/4,6 1202713 Profile cutter PPS Weight: Length - Measuring rail: - Hand lever: Weight: Length - Measuring rail: - Hand lever: 8.3 kg 1000 mm 590 mm Type Order No. Profile cutter, for cutting standard DIN rails NS 15, NS 35/7,5, NS 35/15, and neutral busbars NLS-CU 3/10, with measuring bar inch/metric PPS Basic I/M 1207585 Profile cutter, for cutting and punching standard DIN rails NS 15, NS 32, NS 35/7,5, NS 35/15 and neutral busbars NLS-CU 3/10, for accommodating 2 punch sets, without punching tool, with metric measuring bar PPS STANDARD M 1206175 Workbench, with plywood panel 700 x 1200 x 50 mm, without mounting screws and bore holes PPS TABLE 1206285 Description Type Hydraulic cylinder, for connecting to an existing hydraulic system, operating pressure 160 to 200 Bar, piston force 4 t PPS HYDRAULIC CYL Description Type 19 kg 1000 mm 1000 mm Hydraulic cylinder for PPS standard Height: Diameter: Weight: Piston Ø: Description Order No. 1208924 110 mm 95 mm 3 kg 50 mm Punch inserts for PPS standard Order No. For horizontally elongated hole 3.5 x 12 mm PPS-ST (3,5x12)L 1203563 For horizontally elongated hole 4.5 x 12 mm PPS-ST (4,5x12)L 1203534 For horizontally elongated hole 5.5 x 12 mm PPS-ST (5,5x12)L 1202603 For horizontally elongated hole 6.35 x 15 mm PPS-ST (6,35x15)L 1204876 For horizontally elongated hole 6.5 x 15 mm PPS-ST (6,5x15)L 1202593 For vertically elongated hole 3.5 x 12 mm PPS-ST (3,5x12)Q 1203550 For vertically elongated hole 4.5 x 12 mm PPS-ST (4,5x12)Q 1203547 For vertically elongated hole 5.5 x 12 mm PPS-ST (5,5x12)Q 1203411 For vertically elongated hole 6.35 x 15 mm PPS-ST (6,5x15)Q 1203408 For bore hole 3.8 mm Ø PPS-ST (3,8) 1204892 For bore hole 4.3 mm Ø PPS-ST (4,3) 1202616 For bore hole 5.3 mm Ø PPS-ST (5,3) 1202629 For bore hole 6.4 mm Ø PPS-ST (6,4) 1202632 For bore hole 7 mm Ø PPS-ST (7,0) 1204889 For bore hole 8.4 mm Ø PPS-ST (8,4) 1202726 PHOENIX CONTACT Always up-to-date, always available to you. Here you'll find everything on our products, solutions and service: phoenixcontact.net Product range •I/O systems •Industrial communication technology •Industrial lighting •Installation and mounting material •Marking and labeling •Measurement and control technology •Modular terminal blocks •Monitoring and signaling •PCB Terminal Blocks and PCB Connectors •Plug connectors •Protective devices •Relays •Sensor cable and connectors •Software •Surge protection devices •System cabling for DCS and PLC •Tools •Wireless data communication PHOENIX CONTACT GmbH & Co. KG 32825 Blomberg, Germany Phone: +49 (0) 52 35 3-00 Fax: +49 (0) 52 35 3-4 12 00 phoenixcontact.net MNR 52005122/01.03.2010-01 Printed in Germany © PHOENIX CONTACT 2013 •Cables and connectors •Controllers and PLCs •DIN rail power supplies and UPS •Electronic reversing contactors and motor control •Electronics housing •Ethernet networks •Fieldbus components and systems •Functional safety •HMIs and Industrial PCs