Adjustable IRt/c Models Adjustable IR-TC Sensors IRt/c.10A Quick Selection Guide These models allow users to calibrate the IRt/c sensors to match a thermocouple output in whatever temperature range desired. For example: if the requirement is to measure and control a non-metal target in the 1000 F to 1100 F (540 C to 590 C) range, an IRt/c.10A-K-HiE sensor can be selected. It is then installed and calibrated, in place, to generate a type K signal for that temperature range. IRt/c.20A 1.375 dia. (34,9) 1.375 dia. (34,9) 3.34 lg. (84,8) 4.15 lg. (105,4) IRt/c.100A 1.375 dia. (34,9) 10.45 lg. (265,4) Approximate scale 1:5 dimensions in inches (mm). IRt/c ACF models Close Focus IRt/c AMF models Medium Focus 1.7 (43) IRt/c ALF models Long Focus 3.0 (76) 4.1 (105) 1.375 dia. (34,9) 1.375 dia. (34,9) 1.375 dia. (34,9) 2.97 lg. (75,3) 2.02 lg. (51,3) 3.34 lg. (213) IRt/c AXLF models Extra Long Focus 8.0 (203) 1.375 dia. (34,9) 8.375 lg. (213) Ordering information: (Model) - (Thermocouple Type) - (HiE or LoE) Use the Selection Table. Select the model for (1) temperature range (2) spot size, and (3) target surface material (nonmetal or metal, uncoated). Then finally, (4) select the thermocouple type (J,K, R or S). Example: IRt/c.10A -K- HiE Adjustable IRt/c Options Adjustable IRt/c models are also available, Pre-Calibrated, from Exergen with NIST traceability for quick multiple same sensor installations for factory automation and OEMs. Also, millivolt signal output curves and mv tables are available for all sensor models for special calibrations. C ASM GmbH O R P O R A T I O N 51 Water Street, Watertown, MA 02172 USA 800-422-3006 • 617-923-9900 • Fax 617-923-9911 Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de 11 IRTC-ADJ-02/2009 1 www.asm-sensor.de Adjustable Models Selection Table Adjustable Models selection table Model 2 C Temperature Range °F °C Spot Size Target Surface .10A-HiE J, K -50 to 2500 -45 to 1370 Distance ÷ 10 Nonmetal .10A-LoE J, K 500 to 2500 260 to 1370 Distance ÷ 10 Metal .20A-HiE J, K 500 to 3000 260 to 1650 Distance ÷ 20 Nonmetal .20A-LoE J, K 1000 to 3500 540 to 1930 Distance ÷ 20 Metal .100A-HiE R, S 1000 to 5000 540 to 2760 Distance ÷ 100 Nonmetal .100A-LoE R, S 1500 to 5000 820 to 2760 Distance ÷ 100 Metal .2ACF-HiE J, K 500 to 2500 260 to 1370 2.9 mm Nonmetal .2ACF-LoE J, K 1000 to 2500 540 to 1370 2.9 mm Metal .2/15ACF-HiE J, K 0 to 2500 -18 to 1370 2.9 x 8.7 mm Nonmetal .2/15ACF-LoE J, K 500 to 2500 260 to 1370 2.9 x 8.7 mm Metal .3AMF-Hi E J, K 500 to 2500 260 to 1370 3.7 mm Nonmetal .3AMF-LoE J, K 1100 to 2500 590 to 1370 3.7 mm Metal .4ACF-HiE J, K 0 to 2500 -18 to 1370 5.0 mm Nonmetal .4ACF-LoE J, K 600 to 2500 320 to 1370 5.0 mm Metal .8ACF-LoE J, K 300 to 2500 150 to 1370 8.5 mm Metal .2/18AMF-HiE J, K 0 to 2500 -18 to 1370 4.5 x 12.8 mm Nonmetal .2/18AMF-LoE J, K 600 to 2500 320 to 1370 4.5 x 12.8 mm Metal .6AMF-HiE J, K 0 to 2500 -18 to 1370 6.5 mm Nonmetal .6AMF-LoE J, K 700 to 2500 370 to 1370 6.5 mm Metal .12AMF-LoE J, K 400 to 2500 200 to 1370 11.1 mm Metal .2/15ALF-HiE J, K 700 to 3000 370 to 1650 3.0 x 7.2 mm Nonmetal .2/15ALF-LoE J, K 1200 to 3500 650 to 1930 3.0 x 7.2 mm Metal .4ALF-HiE J, K 700 to 3000 370 to 1650 4 mm Nonmetal .4ALF-LoE J, K 1300 to 3500 700 to 1930 4 mm Metal .7ALF-HiE J, K 300 to 3000 150 to 1650 7.2 mm Nonmetal .7ALF-LoE J, K 900 to 3500 480 to 1930 7.2 mm Metal .2AXLF-HiE R, S 1100 to 3500 590 to 1930 1.8 mm Nonmetal .2AXLF-LoE R, S 2200 to 3500 1200 to 1930 1.8 mm Metal .4AXLF-HiE R, S 900 to 3500 480 to 1930 4.8 mm Nonmetal .4AXLF-LoE R, S 1700 to 3500 930 to 1930 4.8 mm Metal IRTC-ADJ-02/2009 12 T/C Types O R P O R A T I O N 51 Water Street, Watertown, MA 02172 USA Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de 800-422-3006 • 617-923-9900 • Fax 617-923-9911 ASM GmbH Adjustable IR-TC Sensors Adjustable Models IRt/c.10A Range Adjustment Screw: CW to Increase 10:1 Field-of-View 1.375 (34,9) DIA. AIR PURGE/COOL FITTING .558 (14,17) 10 X 8.5 (216) .151 (3,84) AIR PURGE PATH 1X 1.40 (35,5) .80 (20) DIA. .073 (1,85) 3.34 (84,8) T/C WIRE #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.20A Range Adjustment Screw: CW to Increase 20:1 Field-of-View 1.375 (34,9) DIA. AIR PURGE/COOL FITTING .558 (14,17) 20 X 17 (432) .151 (3,84) AIR PURGE PATH 1X 1.40 (35,5) .80 (20) DIA. 4.15 (105,4) .073 (1,85) T/C WIRE #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.10A Target Surface Type Sensing Range Optimum Range Selections Lo E (metal) -50 to 2500°F (-45 to 1370°C) 500 to 2500°F (260 to 1370°C) 500 to 3000°F (260 to 1650°C) 1000 to 3500°F (540 to 1930°C) One model each J, K: adjustable over entire sensing range, output tables available No Aperture: 0.8" (20 mm) at <16" (400 mm) ½" Aperture: 0.5" (13 mm) at <9" (230 mm) ¼" Aperture: 0.25" (6 mm) at<3.5" (90 mm) Field-of-View at > min. spot 10:1 (6°) approximately 20:1 (3°) approximately Spectral Response 2 to 20 µ 0.1 to 5 µ 2 to 20 µ 0.1 to 5 µ Output Impedance 6 to 13 Kohms approx 9 to 18 Kohms approx 6 to 13 Kohms approx 9 to 18 Kohms approx Twisted shielded pair of base thermocouple material (J,K,etc.), 3 ft (.9 m) std length, Teflon sheathed, rated to 392°F (200°C) continuous service. Weight Hi E (non-metal) No Aperture: 0.8" (20 mm) at <7" (180 mm) ½" Aperture: 0.5" (13 mm) at <3.5" (90 mm) ¼" Aperture: 0.25" (6 mm) at <1" (25 mm) Dimensions Lo E (metal) Minimum Spot Size at dist. (with supplied apertures) Cable ASM GmbH IRt/c.20A Hi E (non-metal) 3.34" x 1.375" Dia. (85 x 35 mm) 4.15" x 1.375" Dia. (105 x 35 mm) 8.0 oz (230 g) with cable 8.7 oz (248 g) with cable Housing Stainless steel, hermetically sealed, exceeds NEMA 4,4x; IP65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. Air Purge Built-in; cooling capacity to 400°F (200°C) ambient; 3' (0.9 m) polyurethane tubing provided 51 Water Street, Watertown, MA 02172 USA IRTC-ADJ-02/2009 2 3 800-422-3006 • 617-923-9900 • Fax 617-923-9911 C O R P O R A T I O N Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de 3 www.asm-sensor.de Adjustable Models Adjustable IR-TC Sensors IRt/c.100A 100:1 Field-of-View Range Adjustment Screw 100 X 1.375 (34,9) DIA. AIR PURGE/COOL FITTING .558 (14,17) .151 (3,84) 80 (2000) AIR PURGE 1X T/C .073 (1,85) 1.40 (35,5) 10.45 (265,4) .80 (20) DIA. IRt/c Models #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.100A Target Surface Type Sensing Range Optimum Range Selections Minimum Spot Size Field-of-View Spectral Response Output Impedance Dimensions IRTC-ADJ-02/2009 4 C O R P O R A T I Lo E (metal) 1000 to 5000°F (540 to 2760°C) 1500 to 5000°F (820 to 2760°C) One model each R,S: adjustable over entire sensing range, output tables available At distance, with supplied apertures: No Aperture: 0.8" (20 mm) at <80" (2000 mm) ½" Aperture: 0.5" (13 mm) at <50" (1270 mm) ¼" Aperture: 0.25" (6 mm) at <25" (635 mm) At > min. spot: 100:1 (0.6°) approximately 2 to 20 µ 0.1 to 5 µ 6 to 13 Kohms approx 9 to 18 Kohms approx Twisted shielded pair of base thermocouple material (R,S,etc.), 3 ft (.9 m) std length, Teflon sheathed, rated to 392°F (200°C) continuous service. Cable 24 Hi E (non-metal) 10.5" x 1.375" Dia. (265 x 35 mm) Weight 20 oz (570 g) with cable Housing Stainless steel, hermetically sealed, exceeds NEMA 4,4x; IP65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. Air Purge Built-in; cooling capacity to 400°F (200°C) ambient; 3' (0.9 m) polyurethane tubing provided O N 51 Water Street, Watertown, MA 02172 USA 800-422-3006 • 617-923-9900 • Fax 617-923-9911 Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de ASM GmbH Adjustable Models Adjustable IR-TC Sensors IRt/c.2ACF Close Focus, 0.11" (2.9 mm) Spot Range Adjustment Screw 1.375 (34,9) DIA. AIR PURGE/COOL FITTING .558 (14,17) 0.11" (2.9 mm) Dia AIR PURGE PATH 1.7 (43) .151 (3,84) ~30 2.02 (51,3) .073 (1,85) T/C WIRE Spot size is 0.11" (2.9 mm) at focal plane. Spot size increases with approx 30 deg included angle away from focal plane. #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.2/15ACF Range Adjustment Screw 1.375 (34,9) DIA. Lines Indicating Long Axis of View Spot size is 0.11 x 0.35" (2.9 x 8.7 mm) rectangle at focal plane. Spot size increases with approx 30 deg included angle away from focal plane. AIR PURGE/COOL FITTING .558 (14,17) AIR PURGE PATH 1.7 (43) .151 (3,84) o ~30 .073 (1,85) 2.02 (51,3) T/C WIRE #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED Close Focus “Slot Spot” IRt/c.2ACF Target Surface Type Sensing Range Hi E (non-metal) Lo E (metal) Hi E (non-metal) Lo E (metal) 500 to 2500°F (260 to 1370°C) 1000 to 2500°F (540 to 1370°C) 0 to 2500°F (-18 to 1370°C) 500 to 2500°F (260 to 1370°C) One model each J, K: adjustable over entire sensing range, output tables available Optimum Range Selections Minimum Spot Size IRt/c.2/15ACF At focus: 0.11" (2.9 mm) at 1.7" (43 mm) from sensor Non-focus: 30° approximately Field-of-View Spectral Response Output Impedance 2 to 20 µ 30° approximately 0.1 to 5 µ Dimensions Weight 4 to 8 Kohms (varies by model) 0.1 to 5 µ 10 Kohms approx 2.02" x 1.375" Dia. (51.3 x 35 mm) 2.02" x 1.375" Dia. (51.3 x 35 mm) 6.8 oz (192 g) with cable 6.8 oz (192 g) with cable Housing Stainless steel, hermetically sealed, exceeds NEMA 4,4x; IP65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. Air Purge Built-in; cooling capacity to 400°F (200°C) ambient; 3' (0.9 m) polyurethane tubing provided C 2 to 20 µ Twisted shielded pair of base thermocouple material (J,K,etc.), 3 ft (.9 m) std length, Teflon sheathed, rated to 392°F (200°C) continuous service. Cable ASM GmbH 0.11 x 0.35" (2.9 x 8.7 mm) at 1.7" (43 mm) from sensor O R P O R A T I O N 51 Water Street, Watertown, MA 02172 USA 800-422-3006 • 617-923-9900 • Fax 617-923-9911 Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de 25 IRTC-ADJ-02/2009 5 www.asm-sensor.de Adjustable ModelsIR-TC Sensors Adjustable IRt/c.4ACF Range Adjustment Screw Close Focus 0.20" (5.0 mm) Spot 1.375 (34,9) DIA. AIR PURGE/COOL FITTING .558 (14,17) 0.20" (5.0 mm) Dia AIR PURGE PATH 1.7 (43) .151 (3,84) ~30o 2.02 (51,3) .073 (1,85) T/C WIRE Spot size is 0.20" (5.0 mm) at focal plane. Spot size increases with approx 30 deg included angle away from focal plane. #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.8ACF Close Focus 0.33" (8.5 mm) Spot Range Adjustment Screw 1.375 (34,9) DIA. AIR PURGE/COOL FITTING .558 (14,17) IRt/c Models 0.33" (8.5 mm) Dia AIR PURGE PATH 1.7 (43) .151 (3,84) ~30o 2.02 (51,3) .073 (1,85) T/C WIRE Spot size is 0.33" (8.5 mm) at focal plane. Spot size increases with approx 30 deg included angle away from focal plane. #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.4ACF Target Surface Type Hi E (non-metal) Lo E (metal) Lo E (metal) Sensing Range 0 to 2500°F (-18 to 1370°C) 600 to 2500°F (320 to 1370°C) 300 to 2500°F (150 to 1370°C) One model each J, K: adjustable over entire sensing range, output tables available Optimum Range Selections Minimum Spot Size at Focus Field-of-View (non-focus) Spectral Response Output Impedance IRTC-ADJ-02/2009 6 O 0.33" (8.5 mm) at 1.7" (43 mm) from sensor 30° approximately 30° approximately 2 to 20 µ 0.1 to 5 µ 4 to 8 Kohms (varies by model) 0.1 to 5 µ 10 Kohms approx 2.02" x 1.375" Dia. (51.3 x 35 mm) Dimensions C 0.20" (5.0 mm) at 1.7" (43 mm) from sensor Twisted shielded pair of base thermocouple material (J,K,etc.), 3 ft (.9 m) std length, Teflon sheathed, rated to 392°F (200°C) continuous service. Cable 26 IRt/c.8ACF Weight 6.8 oz (192 g) with cable Housing Stainless steel, hermetically sealed, exceeds NEMA 4,4x; IP65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. Air Purge Built-in; cooling capacity to 400°F (200°C) ambient; 3' (0.9 m) polyurethane tubing provided R P O R A T I O N 51 Water Street, Watertown, MA 02172 USA 800-422-3006 • 617-923-9900 • Fax 617-923-9911 Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de ASM GmbH Adjustable Models Adjustable IR-TC Sensors IRt/c.2/18AMF Range Adjustment Screw 0.18 (4.5 mm) 1.375 (34,9) DIA. Lines Indicating Long Axis of View 0.5 (12.8 mm) AIR PURGE/COOL FITTING .558 (14,17) Spot size is 0.18 x 0.5" 4.5 x 12.8 mm) rectangle at focal plane. Spot size increases with approx 13 deg included angle away from focal plane. AIR PURGE PATH 2.76 (70,1) .151 (3,84) Medium Focus “Slot Spot” ~13o .073 (1,85) 2.97 (75,3) T/C WIRE #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.3AMF Range Adjustment Screw Medium Focus 0.12" (3 mm) Spot 1.375 (34,9) DIA. Spot size is 0.12" (3 mm) dia. at focal plane. Spot size increases with approx 13 deg included angle away from focal plane. AIR PURGE/COOL FITTING .558 (14,17) AIR PURGE PATH 2.76 (70,1) .151 (3,84) ~13o 2.97 (75,3) T/C WIRE #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED .073 (1,85) IRt/c.2/18AMF IRt/c.3AMF Target Surface Type Hi E (non-metal) Lo E (metal) Hi E (non-metal) Lo E (metal) Sensing Range 0 to 2500°F (-18 to 1370°C) 600 to 2500°F (320 to 1370°C) 500 to 2500°F (260 to 1370°C) 1100 to 2500°F (590 to 1370°C) One model each J, K: adjustable over entire sensing range, output tables available Optimum Range Selections Minimum Spot Size at Focus 0.18 x 0.5" (4.5 x 12.8 mm) at 3" (76 mm) from sensor 13° approximately Field-of-View (non-focus) Spectral Response 2 to 20 µ 0.1 to 5 µ Dimensions 2.97" x 1.375" Dia. (75.3 x 35 mm) Weight 6.8 oz (192 g) with cable Housing Stainless steel, hermetically sealed, exceeds NEMA 4,4x; IP65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. Air Purge Built-in; cooling capacity to 400°F (200°C) ambient; 3' (0.9 m) polyurethane tubing provided C 0.1 to 5 µ Twisted shielded pair of base thermocouple material (J,K,etc.), 3 ft (.9 m) std length, Teflon sheathed, rated to 392°F (200°C) continuous service. Cable 2 to 20 µ 10 Kohms approx Output Impedance ASM GmbH 0.15" (3.7 mm) at 3" (76 mm) from sensor O R P O R A T I O N 51 Water Street, Watertown, MA 02172 USA 800-422-3006 • 617-923-9900 • Fax 617-923-9911 Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de 27 IRTC-ADJ-02/2009 7 www.asm-sensor.de Adjustable Models Adjustable IR-TC Sensors IRt/c.6AMF Range Adjustment Screw Medium Focus 0.26" (6.5 mm) Spot 1.375 (34,9) DIA. AIR PURGE/COOL FITTING .558 (14,17) AIR PURGE PATH 2.76 (70,1) .151 (3,84) ~13o Spot size is 0.26" (6.5 mm) dia. at focal plane. Spot size increases with approx 13 deg included angle away from focal plane. 2.97 (75,3) T/C WIRE .073 (1,85) #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.12AMF IRt/c Models Range Adjustment Screw Medium Focus 0.48" (11.1 mm) Spot 1.375 (34,9) DIA. Spot size is 0.48" (11,1 mm) dia. at focal plane. Spot size increases with approx 13 deg included angle away from focal plane. AIR PURGE/COOL FITTING .558 (14,17) AIR PURGE PATH 2.76 (70,1) .151 (3,84) o ~13 2.97 (75,3) T/C WIRE .073 (1,85) #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.6AMF IRt/c.12AMF Target Surface Type Hi E (non-metal) Lo E (metal) Lo E (metal) Sensing Range 0 to 2500°F (-18 to 1370°C) 700 to 2500°F (370 to 1370°C) 400 to 2500°F 200 to 1370°C) One model each J, K: adjustable over entire sensing range, output tables available Optimum Range Selections Minimum Spot Size at Focus 0.26" (6.5 mm) at 3" (76 mm) from sensor 13° approximately Field-of-View (non-focus) 2 to 20 µ Spectral Response 0.1 to 5 µ 0.1 to 5 µ 10 Kohms approx Output Impedance Twisted shielded pair of base thermocouple material (J,K,etc.), 3 ft (.9 m) std length, Teflon sheathed, rated to 392°F (200°C) continuous service. Cable 2.97" x 1.375" Dia. (75.3 x 35 mm) Dimensions Weight 6.8 oz (192 g) with cable Housing Stainless steel, hermetically sealed, exceeds NEMA 4,4x; IP65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. Air Purge Built-in; cooling capacity to 400°F (200°C) ambient; 3' (0.9 m) polyurethane tubing provided 28 IRTC-ADJ-02/2009 8 0.48" (11.1 mm) at 3" (76 mm) from sensor C O R P O R A T I O N 51 Water Street, Watertown, MA 02172 USA 800-422-3006 • 617-923-9900 • Fax 617-923-9911 Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de ASM GmbH Adjustable Models Adjustable IR-TC Sensors IRt/c.2/15ALF Range Adjustment Screw 1.375 (34,9) DIA. Spot size is 0.12 x 0.28" (3 x 7.2 mm) rectangle at focal plane. Spot size increases with approx 11 deg inlcluded angle away from focal plane. Lines Indicating Long Axis of View AIR PURGE/COOL FITTING .558 (14,17) AIR PURGE PATH .151 (3,84) 4.1 (105) ~11 o 3.34 (84,8) .073 (1,85) Long Focus “Slot Spot” T/C WIRE #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.4ALF Range Adjustment Screw Long Focus 0.14" (3.5 mm) Spot 1.375 (34,9) DIA. AIR PURGE/COOL FITTING AIR PURGE PATH .151 (3,84) IRt/c Models .558 (14,17) 4.1 (105) ~11 o 3.34 (84,8) .073 (1,85) Spot size is 0.14 (3.5 mm) dia. at focal plane. Spot size increases with approx 11 deg included angle away from focal plane. T/C WIRE #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.2/15ALF IRt/c.4ALF Target Surface Type Hi E (non-metal) Lo E (metal) Hi E (non-metal) Lo E (metal) Sensing Range 700 to 3000°F (370 to 1650°C) 1200 to 3500°F (650 to 1930°C) 700 to 3000°F (370 to 1650°C) 1200 to 3500°F (700 to 1930°C) Optimum Range Selections Minimum Spot Size at Focus One model each J, K: adjustable over entire sensing range, output tables available 0.12 x 0.28" (3 x 7.2 mm) at 4.1" (105 mm) from sensor 11° approximately Field-of-View (non-focus) Spectral Response 2 to 20 µ 0.1 to 5 µ Dimensions 3.34" x 1.375" Dia. (84.8 x 35 mm) Weight 8.7 oz (248 g) with cable Housing Stainless steel, hermetically sealed, exceeds NEMA 4,4x; IP65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. Air Purge Built-in; cooling capacity to 400°F (200°C) ambient; 3' (0.9 m) polyurethane tubing provided C 0.1 to 5 µ Twisted shielded pair of base thermocouple material (J,K,etc.), 3 ft (.9 m) std length, Teflon sheathed, rated to 392°F (200°C) continuous service. Cable 2 to 20 µ 10 Kohms approx Output Impedance ASM GmbH 0.14" (35 mm) at 4.1" (105 mm) from sensor O R P O R A T I O N 51 Water Street, Watertown, MA 02172 USA 800-422-3006 • 617-923-9900 • Fax 617-923-9911 Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de 29 IRTC-ADJ-02/2009 9 www.asm-sensor.de Adjustable Adjustable ModelsIR-TC Sensors IRt/c.7ALF Long Focus 0.3" (7 mm) Spot Range Adjustment Screw 1.375 (34,9) DIA. AIR PURGE/COOL FITTING .558 (14,17) AIR PURGE PATH .151 (3,84) 4.1 (105) ~11 o 3.34 (84,8) .073 (1,85) Spot size is 0.28" (7.2 mm) dia. at focal plane. Spot size increases with approx 11 deg inlcluded angle away from focal plane. IRt/c Models T/C WIRE #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED IRt/c.7ALF Target Surface Type Hi E (non-metal) Lo E (metal) Sensing Range 300 to 3000°F (150 to 1650°C) 900 to 3500°F (480 to 1930°C) Optimum Range Selections One model each J, K: adjustable over entire sensing range, output tables available Minimum Spot Size at Focus 0.28" (7.2 mm) at 4.1" (105 mm) from sensor 11° approximately Field-of-View (non-focus) Spectral Response 2 to 20 µ 0.1 to 5 µ 10 Kohms approx Output Impedance Twisted shielded pair of base thermocouple material (J,K,etc.), 3 ft (.9 m) std length, Teflon sheathed rated to 392°F (200°C) continuous service. Cable 3.34" x 1.375" Dia. (84.8 x 35 mm) Dimensions 30 IRTC-ADJ-02/2009 10 Weight 8.7 oz (248 g) with cable Housing Stainless steel, hermetically sealed, exceeds NEMA 4,4x; IP65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. Air Purge Built-in; cooling capacity to 400°F (200°C) ambient; 3' (0.9 m) polyurethane tubing provided C O R P O R A T I O N 51 Water Street, Watertown, MA 02172 USA 800-422-3006 • 617-923-9900 • Fax 617-923-9911 Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de ASM GmbH Adjustable IR-TC Sensors Adjustable Models IRt/c.2AXLF Range Adjustment Screw 1.375 (34,9) DIA. AIR PURGE/COOL FITTING AIR PURGE PATH .558 (14,17) Extra Long Focus 0.07" (1.8 mm) Spot 8.0 (203) ~ 5o .151 (1,85) 8.375 (213) .073 (1,85) T/C WIRE #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED .151 (3,84) Spot size is 0.07 (1.8 mm) dia. at focal plane. Spot size increases with approx 5 deg included angle away from focal plane. IRt/c.4AXLF Range Adjustment Screw 1.375 (34,9) DIA. Extra Long Focus 0.19" (4.8 mm) Spot 8.0 (203) IRt/c Models AIR PURGE/COOL FITTING AIR PURGE PATH .558 (14,17) ~ 5o .151 (1,85) 8.375 (213) .073 (1,85) T/C WIRE #10-32 MOUNTING HOLES ON A 1.0" (25,4) DIA BOLT CIR., MOUNTING SCREWS PROVIDED .151 (3,84) Spot size is 0.14 (3.5 mm) dia. at focal plane. Spot size increases with approx 5 deg included angle away from focal plane. IRt/c.2AXLF IRt/c.4AXLF Target Surface Type Hi E (non-metal) Lo E (metal) Hi E (non-metal) Lo E (metal) Sensing Range 1100 to 3500°F (590 to 1930°C) 2200 to 3500°F (1200 to 1930°C) 900 to 3500°F (480 to 1930°C) 1700 to 3500°F (930 to 1930°C) Optimum Range Selections Minimum Spot Size at Focus One model each R, S: adjustable over entire sensing range, output tables available 0.07" (1.8 mm) at 8" (200 mm) from sensor 5° approximately Field-of-View (non-focus) Spectral Response 2 to 20 µ 0.1 to 5 µ Dimensions 8.375" x 1.375" Dia. (213 x 35 mm) Weight 20 oz (570 g) with cable Housing Stainless steel, hermetically sealed, exceeds NEMA 4,4x; IP65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. Air Purge Built-in; cooling capacity to 400°F (200°C) ambient; 3' (0.9 m) polyurethane tubing provided C 0.1 to 5 µ Twisted shielded pair of base thermocouple material (J,K,etc.), 3 ft (.9 m) std length, Teflon sheathed, rated to 392°F (200°C) continuous service. Cable 2 to 20 µ 10 Kohms approx Output Impedance ASM GmbH 0.19" (4.8 mm) at 8" (200 mm) from sensor O R P O R A T I O N 51 Water Street, Watertown, MA 02172 USA 800-422-3006 • 617-923-9900 • Fax 617-923-9911 Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.de 31 IRTC-ADJ-02/2009 11 ASM GmbH Am Bleichbach 18 - 22 85452 Moosinning Deutschland Tel. +49-(0)8123-986-0 Fax +49-(0)8123-986-500 [email protected] www.asm-sensor.de © by ASM GmbH Moosinning. Änderungen und Irrtümer vorbehalten. Schutzvermerk DIN34 beachten. 02.2009