“LAN-MATE” SERIES SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS AND LEDS P/N: KLU1T041C-34 LF Page:1/2 Feature z z Complies with requirement of IEEE802.3u standards. RJ-45 connector integrated with transformer/impedance resistor/high voltage capacitor. Size same as RJ-45 connector to save PCB board space. Reduced EMI radiation to improve EMI performance. Design for 10/100 BASE transmission over UTP-5 cable. RJ 45 connector with 10/100 BASE-TX magnetic. Meet UL safety standard. Includes integrated 2 LEDS(option). LEDS are isolated to reduce cross talk and electro-magnetics interference. Compliance with ROHS requirements. Operating temperature range: 0℃ to +70℃. Storage temperature range: -25℃ to +85℃. Recommended panel z z z z z z z z z z z Part Number Standard LED Forward*V(Max) 3 YELLOW 2.6V 4 GREEN 2.6V (TYP) 2.1V 2.2V *with a forward current of 20mA Electrical Specifications @ 25°C Part Number KLU1T041C-34 LF Turns Ratio OCL(uH Min) (±5%) @ 100 KHz/0.1V TX RX with 8mA DC Bias 1CT:1CT 1CT:1CT 350 CW/W L.L (pF Max) (uH Max) 28 0.4 Insertion Loss (dB Max)TX/RX HI-POT (VAC) 0.3-100MHz -1.15 1500 Continue Part Number Return Loss Cross talk CMR (dB Min) (dB Min)TX/RX (dB Min) 30MHz 40MHz 50MHz 60MHz 80MHz 0.3-30MHz 30-60MHz 60-100MHz 1-30MHz 30-60MHz 60-125MHz KLU1T041C-34 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 Schematic www.bothhandusa.com 978-887-8050 [email protected] A0 (11/05) “LAN-MATE” SERIES SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS AND LEDS P/N: KLU1T041C-34 LF Page:2/2 Mechanical 1. Plastic Material : Thermoplastic (UL 94V-0), Black Housing 2. Metal Shield : Brass, 20u" inches thick Nickel 3. Spring Wire : Phosphor bronze with selective gold plating 4. Solder Pin : 0.5x0.35mm, SUS430 with solder Plated 5. Durability : 750 Mating cycles Min. PCB Layout Mounting Hole(Top View) www.bothhandusa.com 978-887-8050 [email protected] A0 (11/05)