BOTHHAND “LAN-MATE” SERIES DESCRIPTION : 10/100 BASE-T RJ45 1 x 1 INTEGRATED USA MAGNETICS CONNECTOR P/N: KLU1T041X-43 LF Feature l l l l l l l l l l l l RJ-45 needs to be matched FCC standard. Complies with requirement of IEEE802.3u standards. RJ-45 connector integrated with transformer/impedance resistor/high voltage capacitor. Size same as RJ-45 connector to save PCB board space. Reduced EMI radiation to improve EMI performance. Design for 10/100 BASE transmission over UTP-5 cable. Includes integrated 2 LEDS (option). LEDS are isolated to reduce cross talk and electro- magnetics interference. Compliance with ROHS requirements. Operating temperature range: 0℃ to +70℃. Storage temperature range: -25℃ to +85℃. Recommended panel Part Number Standard LED Forward*V(Max) 3 YELLOW 2.6V 4 GREEN 2.6V *With a forward current 20mA (TYP) 2.1V 2.2V Electrical Specifications @ 25°C Part Number Turns Ratio OCL (uH Min) (±5%) @ 100KHz/0.1V TX RX with 8mA DC Bias KLU1T041X-43 LF 1CT:1CT 1CT:1CT 350 CW/W L.L (pF Max) (uH Max) 56 0.5 Insertion Loss (dB Max) 0.3-100MHz -0.8 HI-POT (Vrms) 1500 Continue Part Number Return Loss Cross talk CMR (dB Min) (dB Min) (dB Min) 30MHz 40MHz 50MHz 60MHz 80MHz 0.3-30MHz 30-60MHz 60-100MHz 1-30MHz 30-60MHz 60-125MHz KLU1T041X-43 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 Schematic www.bothhandusa.com Page :1/2 [email protected] A3(12/07) “LAN-MATE” SERIES DESCRIPTION : 10/100 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR BOTHHAND USA P/N: KLU1T041X-43 LF Mechanical 1. Plastic Material : Thermoplastic (UL 94V-0), Black Housing 2. Metal Shield : Brass, 20u" inches thick Nickel 3. Spring Wire 4. Solder Pin Phosphor bronze with 0.1524 *10 m gold plated & : 0.45mm Dia. -6 1.524*10 m thick Nickel : 0.5x0.35mm, SUS430 with solder Plated 5. Durability : 750 Mating cycles Min. -6 PCB Layout Mounting Hole(Top View) www.bothhandusa.com Page :2/2 [email protected] A3(12/07)