BOTHHAND “LAN-MATE” SERIES 1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR 1000 BASE-T MAGNETICS z RJ-45 needs to be matched FCC standard. z Complies with requirement of IEEE 802.3ab standards. z RJ-45 connector integrated with transformer/impedance USA Page 1 of 3 resistor/high voltage capacitor. z Size same as RJ-45 connector to save PCB board space. z Reduced EMI radiation to improve EMI performance. z Design for 1000 BASE transmission over UTP-5 cable. z Isolation @ 60Hz: Input to output:1500Vrms. z Compliance with ROHS requirements. z Operating temperature range: 0℃ to +70℃. z Storage temperature range: -25℃ to +85℃. S T Electrical Specifications @ 25℃ Turns Ratio Part OCL (uH Min) @ 100KHz/0.1V with 8mA DC Bias 0.3-30MHz (±5%) Number Cross talk HI-POT (dB Min) 30-60MHz 60-100MHz (Vrms) TX RX KLA1S109 LF 1CT: 1CT 1CT: 1CT 350 -40 -35 -30 1500 KLA1S109D LF 1CT: 1CT 1CT: 1CT 350 -40 -35 -30 1500 KLA1S109FCP-1 LF 1CT:1CT 1CT:1CT 350 -40 -35 -30 1500 KLA1S109F-1 LF 1CT:1CT 1CT:1CT 350 -40 -35 -30 1500 Continue Insertion Loss Return Loss CMR (dB Max) 1-100MHz 1-30MHz (dB Min) @ Load 100Ω 30-40MHz 40-50MHz 60-125MHz KLA1S109 LF -1.0 -16 -13.5 KLA1S109D LF KLA1S109FCP-1 LF -1.0 -1.0 -16 -16 KLA1S109F-1 LF -1.0 -16 Part Number 50-80MHz 1-30MHz (dB Min) 30-60MHz -11.5 -10 -30 -25 -20 -13.5 -13.5 -11.5 -11.5 -10 -10 -30 -30 -25 -25 -20 -20 -13.5 -11.5 -10 -30 -25 -20 For customized parts or more detailed information, please log on www.bothhandusa.com or write to [email protected] NOTE: 1. Differential to Common Mode Rejection (dB Min) 1-30MHz 30-60MHz 60-100MHz -43 -37 -33 Bothhand USA Tel: 978-887-8050 Fax: 978-887-5434 E-mail : [email protected] http://www.bothhandusa.com 136 BOTHHAND USA “LAN-MATE” SERIES 1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR 1000 BASE-T MAGNETICS Mechanicals Page 2 of 3 KLA1SXXX LF 1. Plastic Material : Thermoplastic (UL 94V-0), Black Housing 2. Metal Shield : Brass, 20u" inches thick Nickel 3. Spring Wire : 4. Solder Pin : 0.5x0.35mm, SUS430 with solder Plated 5. Durability : 750 Mating cycles Min. -6 0.45mm Dia. Phosphor bronze with 0.1524 *10 m gold plated & 1.524*10-6 m thick Nickel PCB Layout Mounting Hole (Top View) KLA1SXXX LF Bothhand USA Tel: 978-887-8050 Fax: 978-887-5434 E-mail : [email protected] http://www.bothhandusa.com 137 BOTHHAND USA “LAN-MATE” SERIES 1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR 1000 BASE-T MAGNETICS Page 3 of 3 Specification Packing Manner Q’ty per Tube/Reel Q’ty/ Inner box Q’ty/ Carton KLA1SXXX LF TUBE 30 480 1920 KLA1TXXX LF TUBE 26 416 1664 Schematics KLA1S109 LF KLA1S109D LF KLA1S109FCP-1 LF KLA1S109F-1 LF Part Numbering System Example BHJack Part Number: K L A 代表非 MD TAB DOWN 機構 1000 BASE (802.3U) 1 S 109 LF Number of parts Shield type S: standard shield T: with spring tab on top and side D: spring tab on side for different circuit RoHS “1” : single port RJ-45 JACK E: spring tab on top Bothhand USA Tel: 978-887-8050 Fax: 978-887-5434 E-mail : [email protected] http://www.bothhandusa.com 138