BOTHHAND “LAN-MATE”SERIES 10/100 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR USA 10/100 BASE-TX MAGNETICS Page 1 of 4 z z z z z z z z z z z RJ-45 needs to be matched FCC standard. Complies with requirement of IEEE802.3u standards. RJ-45 connector integrated with transformer/impedance resistor/high voltage capacitor. Size same as RJ-45 connector to save PCB board space. Reduced EMI radiation to improve EMI performance. Design for 10/100 BASE transmission over UTP-5 cable. Includes integrated 2 LEDS(option). LED signal leads are isolated from the Ethernet signal leads to reduce EMI and cross talk. Compliance with ROHS requirements. Operating temperature range: 0℃ to +70℃. Storage temperature range: -25℃ to +85℃. S T Electrical specifications @ 25℃ Turns Ratio (±5%) Part Number TX RX OCL (uH Min) @ 100 KHz/0.1V with 8mA DC Bias CW/W (pF Max) L.L (uH Max) Insertion Loss (dB Max) HI-POT (Vrms) 0.3-100MHz KLU1S041-34 LF 1CT:1CT 1CT:1CT 350 28 0.4 -1.15 1500 KLU1S041A –43 LF 1CT:1CT 1CT:1CT 350 28 0.4 -1.15 1500 KLU1S041C-34 LF 1CT:1CT 1CT:1CT 350 28 0.4 -1.15 1500 KLU1S041CM-43 LF 1CT:1CT 1CT:1CT 350 28 0.4 -1.15 1500 KLU1S041CX-34 LF 1CT:1CT 1CT:1CT 350 56 0.5 -1.15 1500 KLU1S041F -43 LF 1CT:1CT 1CT:1CT 350 28 0.4 -1.15 1500 KLU1S041X-43 LF 1CT:1CT 1CT:1CT 350 56 0.5 -0.8 1500 KLU1S516-34 LF 1CT:1 1CT:1CT 350 28 0.4 -1.15 1500 KLU1T516E1-43 LF 1CT:1 1CT:1CT 350 -- -- -1.15 1500 Continue Return Loss (dB Min) Number Cross talk (dB Min) CMR (dB Min) 30MHz 40MHz 50MHz 60MHz 80MHz 0.3-30MHz 30-60MHz 60-100MHz 1-30MHz 30-60MHz 60-125MHz KLU1S041-34 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 KLU1S041A –43 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 KLU1S041C-34 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 KLU1S041CM-43 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 KLU1S041CX-34 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 KLU1S041F -43 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 KLU1S041X-43 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 KLU1S516-34 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 KLU1T516E1-43 LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 For customized parts or more detailed information, please log on www.bothhandusa.com or write to [email protected] Bothhand USA Tel: 978-887-8050 Fax: 978-887-5434 E-mail : [email protected] http://www.bothhandusa.com 132 BOTHHAND “LAN-MATE”SERIES 10/100 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR USA 10/100 BASE-TX MAGNETICS Page 2 of 4 Mechanicals KLU1SXXXX-XX LF 1. Plastic Material : Thermoplastic (UL 94V-0), Black Housing 2. Metal Shield : Brass, 20u" inches thick Nickel 3. Spring Wire : 4. Solder Pin : 0.5x0.35mm, SUS430 with solder Plated 5. Durability : 750 Mating cycles Min. -6 0.45mm Dia. Phosphor bronze with 0.1524 *10 m gold plated & -6 1.524*10 m thick Nickel PCB Layout Mounting Hole (Top View) KLU1SXXXX-XX LF Bothhand USA Tel: 978-887-8050 Fax: 978-887-5434 E-mail : [email protected] http://www.bothhandusa.com 133 BOTHHAND “LAN-MATE”SERIES 10/100 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR USA 10/100 BASE-TX MAGNETICS Page 3 of 4 Specification Packing Manner Q’ty per Tube/Reel Q’ty/ Inner box Q’ty/ Carton KLU1SXXX LF TUBE 30 480 1920 KLU1TXXX LF TUBE 26 416 1664 Schematics KLU1S041-34 LF KLU1S041A –43 LF KLU1S041C-34 LF KLU1S041CM-43 LF KLU1S041CX-34 LF KLU1S041F -43 LF KLU1S041X-43 LF KLU1S516-34 LF Bothhand USA Tel: 978-887-8050 Fax: 978-887-5434 E-mail : [email protected] http://www.bothhandusa.com 134 BOTHHAND “LAN-MATE”SERIES 10/100 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR USA 10/100 BASE-TX MAGNETICS Page 4 of 4 KLU1T516E1-43 LF Part Numbering System Example BHJack Part Number: K L U 1 100 BASE (802.3U) 代表非 MD 機構 TAB DOWN RJ-45 JACK Number of parts “1” : single port S 041 -XX LF Shield type S: standard shield T: with spring tab on top and side D: spring tab on side for different circuit Led options RoHS E: spring tab on top Bothhand USA Tel: 978-887-8050 Fax: 978-887-5434 E-mail : [email protected] http://www.bothhandusa.com 135