ELCO Card-Edge Connectors AVX Table of Contents PAGE Applications 2 Contact Styles 2 Design Aids 3 Mounting Variations 4 Board to Board Mating Variations 4 SPACING .156 X .200 CONTACT STYLE TERMINATION Solder, Wire Wrap, Solder Eyelet, Switching Semi-Bellows Rectangular Tails Card Guides: Solder, Solder Eyelet, Wire Wrap, Switching 1 PROFILE HEIGHT/CARD SLOT SERIES .460" Low Profile / .300" 6 to 86 Contacts 6007 .300" Card 22 or 44 Contacts 6022 PAGE 5 6 .300" Card 18 or 36 Contacts 6024 AVX Applications Versatility AVX’s Card-Edge line of standards and specials meet the requirements of a wide variety of applications. Connectors are available with either single or dual read outs. They may apply to single, double and multilayer boards up to 178 contacts. Standard contact is bifurcated for dual points of mating while available in either semi-bellows or cantilever. Select from such terminations as straight or right angle, wire wrap, printed circuit and solder eyelet. Mounting possibilities include printed circuit and solderless printed circuit press-fit. Consult factory or the AVX distributor near you for other possible series offerings. Motherboard to daughter card Wire wrap to daughter card Parallel boards Contact Styles Contact tail styles ITEM DESCRIPTION Contact style 1. Solder eyelet hole: soldering discrete wire to contact tail MATING SIDE TO CONTACT TAIL Recommended wire size (18 AWG max.) 2. Rectangle solder type: flow solder connector to the motherboard PCB finished hole size .050" 3. .025" square solder post: flow solder connector to the motherboard PCB finished hole size .035" CANTILEVER SEMI-BELLOWS SERIES SERIES 6333 6007 6352 4. .025" square wire wrap post: use with automatic wire wrap machine Recommended wire size (30 AWG typ.) Cantilever: Where controlled normal forces with low cost is desired. 5. .025" press-fit post VARIPIN™: pressfit connector into the motherboard (contact replaceable) PCB finished hole size .040" ± .003" Semi-Bellows type: Where short P.C. board pad length and lower insertion forces are required. 2 CONFIG. AVX Design Aids Low profile mounting dimensions: 6007 Design aids questionnaire P.C. Circuit board definitions 1. What is the centerline spacing of contact pads? Connector definitions 1. What is the contact centerline spacing? 2. What is the P.C. board thickness? 2. What is the contact row spacing? 3. What is the lead-in edge to the mating P.C. board? 3. What is the connector height? 4. What is the plating and thickness of P.C. pads? 4. What is the card slot depth? 5. What finished hole size is used on the mounting P.C. board? (Motherboard mounted) 5. What type of mounting is desired? 6. What contact tail length and plating required? 6. What kind of polarization is required? 7. Number of contacts required? 7. What is the length of the P.C. card? 3 AVX Insulator Mounting Variations STD SERIES 6007 FLUSH MOUNT USUALLY USED WITH WIRE WRAP TAILS STD SERIES 6007 1 STD SERIES 6308 FLUSH MOUNT WITH INSERT USUALLY USED WITH SOLDER TAILS 2 NO MOUNTING EARS USUALLY USED WITH SOLDER TAILS Board to Board Mating Variations Please consult the factory for special tail configurations 4 3 .156" x .200" NO. OF CONTACTS SINGLE DUAL READOUT READOUT 6 12 10 20 12 24 15 30 18 36 22 44 36 72 43 86 SERIES 6007 Rectangular Tails A 1.842 2.466 2.778 3.246 3.714 4.338 6.522 7.614 B 1.532 2.156 2.468 2.936 3.404 4.028 6.212 7.304 Features ⵧ *Meets the performance requirements of MIL-C-21097 ⵧ Single and dual read-out contacts ⵧ Eight sizes: 6/12, 10/20, 12/24, 15/30, 18/36, 22/44, 36/72, 43/86, contacts ⵧ Three mounting styles: mounting holes, floating eyelets and threaded inserts Specifications Current rating: 5 amperes Contact resistance: 6 milliohms, maximum Contact material: Phosphor bronze Contact plating: Overall: 50-100 microinches nickel and 10 microinches min. gold overall Insertion/withdrawal force: 2 to 16 ounces per contact pair, nominal P.C. card Insulator material: Diallyl phthalate, glassfilled, per MIL-M-14F, type SDGF (check factory for other available materials) Insulation resistance: 25,000 megohms, minimum Dielectric withstanding voltage: 2000 VAC between adjacent contacts, RMS, at sea level C 1.246 1.870 2.182 2.650 3.118 3.742 5.926 7.018 D 1.100 1.724 2.036 2.504 2.972 3.596 5.780 6.872 E 1.290 1.910 2.220 2.700 3.160 3.790 5.940 7.040 F 1.086 1.710 2.022 2.490 2.958 3.582 5.766 6.858 H .343 .343 .343 .343 .343 .343 .500 .500 J .380 .380 .380 .380 .380 .380 .540 .540 Ordering Code 00 Typical Example 6007 030 SERIES NUMBER OF CONTACTS CONTACT CODE Single Read-Out (contact tails on number side of insulator) 552 60-6007-16-33 P.C. tab (single sided): .202" lg. (.013" x .045") 936 60-6007-06-43 Wrap (.016" x .047") special: .497" lg. (double sided) 938 60-6007-06-33 P.C. tab special: .215" lg. (double sided) (.013" x .047") 2 940 60-6007-06-23 Wire hole special: .227" lg. (double sided) (.013" x .089") Dual Read-Out 1 450 60-6007-19-23 Wire hole: .277" lg. (.013" x .078") 451 60-6007-19-33 P.C. tab: .202" lg. (.013" x .048") 452 60-6007-18-13 Solderless wrap (.016" x .044"): .697" lg. 453 60-6007-18-23 P.C. tab: .347" lg. (.016" x .044") 454 60-6007-18-33 Solderless wrap (.016" x .044"): .517" lg. 498 60-6007-05-33 Switching (used in pairs): .202" lg. P.C. tab 941 60-6007-05-13 Switching (used in pairs): .229" lg. wire hole 1 Wire hole size: (.062" x .125") 2 Wire hole size: (.046" x .125") 왕 왕 왕 왕 VARIATION CODE Plating Overall 012 With .128" dia. mounting holes 018 With #4-40 insert Recommended for standard applications. Available through AVX franchised distributors. 5 450 012 .156" x .200" Features ⵧ Extended card guides ⵧ Ribbon-type contacts with bifurcated nose ⵧ Choice of terminations: solder (wire hole and P.C. tab), or low-cost solderless wrap contacts ⵧ For 1/16" P.C. card Specifications Current rating: 5 amperes Contact resistance: 6 milliohms, maximum Contact material: Phosphor bronze SERIES 6022/6024 Contact plating:* Overall: 50-100 microinches nickel and 10 microinches min. gold overall Insertion/withdrawal force: 2 to 16 ounces per contact pair, nominal P.C. card Insulator material: Polyester per UL 94VO Insulation resistance: 5000 megohms, minimum Dielectric withstanding voltage: 1800 VAC between adjacent contacts, RMS, at sea level Rectangular Tails Series 6007 Contacts * For other type platings and thicknesses please consult factory. Ordering Code 00 Typical Example SERIES 6022 6022 044 6024 NUMBER OF CONTACTS 6022 6024 Single Readout 22 Dual Readout 44 Single Readout 18 Dual Readout 36 CONTACT CODE Single Read-Out 552 60-6007-16-33 P.C. tab (single sided): .202" lg. 936 60-6007-06-43 Wrap (.016" x .047") special: .497" lg. 938 60-6007-06-33 P.C. tab special: .215" lg. 940 60-6007-06-23 Wire hole special: .227" lg. VARIATION CODE 6022 Plating Overall 001 44 Dual read-out contacts installed in all positions 002 22 Single read-out contacts installed on numbered side only (551, 552, 936, 938, 940) 003 22 Single read-out contacts installed on lettered side only (551, 552, 936, 938, 940) 004 22 Single read-out contacts installed staggered starting with position 1, B, 3, D, etc. (936, 938, 940 only) 005 22 Single read-out contacts installed staggered starting with position A, 2, C, 4, etc. (936, 938, 940 only) Dual Read-Out 450 1 60-6007-19-23 Wire hole: .277" lg. 451 60-6007-19-33 P.C. tab: .202" lg. 452 60-6007-18-13 Solderless wrap (.016" x .044"): .697" lg. 453 60-6007-18-23 P.C. tab: .347" lg. 454 60-6007-18-33 Solderless wrap (.016" x .044"): .517" lg. 498 60-6007-05-33 Switching (used in pairs): .202" lg. P.C. tab 941 60-6007-05-13 Switching (used in pairs): .229" lg. wire hole 6024 Plating Overall 001 Dual read-out contacts 002 Single read-out contacts with tails in position “1” to “18” (551, 552, 936, 938, 940) 003 Single read-out contacts with tails in positions “A” to “V” (551, 552, 936, 938, 940) 004 Single read-out contacts with tails in positions 1-B-3, etc. (936, 938, 940 only) 005 Single read-out contacts with tails in positions A-2-C, etc. (936, 938, 940 only) 6 450 001 AMERICAS EUROPE ASIA-PACIFIC AVX Myrtle Beach, SC Corporate Offices AVX Limited, England European Headquarters AVX/Kyocera, Singapore Asia-Pacific Headquarters Tel: 843-448-9411 FAX: 843-448-1943 Tel: ++44 (0) 1252-770000 FAX: ++44 (0) 1252-770001 Tel: (65) 6286-7555 FAX: (65) 6488-9880 AVX Northwest, WA AVX/ELCO, England AVX/Kyocera, Hong Kong Tel: 360-699-8746 FAX: 360-699-8751 Tel: ++44 (0) 1638-675000 FAX: ++44 (0) 1638-675002 Tel: (852) 2-363-3303 FAX: (852) 2-765-8185 AVX North Central, IN AVX S.A.S., France AVX/Kyocera, Korea Tel: 317-848-7153 FAX: 317-844-9314 Tel: ++33 (0) 1-69-18-46-00 FAX: ++33 (0) 1-69-28-73-87 Tel: (82) 2-785-6504 FAX: (82) 2-784-5411 AVX Midwest, MN AVX GmbH, Germany AVX/Kyocera, Taiwan Tel: 952-974-9155 FAX: 952-974-9179 Tel: ++49 (0) 8131-9004-0 FAX: ++49 (0) 8131-9004-44 Tel: (886) 2-2698-8778 FAX: (886) 2-2698-8777 AVX Mid/Pacific, CA AVX srl, Italy AVX/Kyocera, Malaysia Tel: 510-661-4100 FAX: 510-661-4101 Tel: ++390 (0)2 614-571 FAX: ++390 (0)2 614-2576 Tel: (60) 4-228-1190 FAX: (60) 4-228-1196 AVX Northeast, MA AVX Czech Republic Tel: 617-479-0345 FAX: 843-916-7614 Tel: ++420 57 57 57 521 FAX: ++420 57 57 57 109 ASIA-KED KED, Hong Kong Tel: (852) 2305 1080 FAX: (852) 2305 1405 KED, Shanghai Tel: (86) 21 6859 9898 FAX: (86) 21 5887 2542 KED, Beijing Tel: (86) 10 5869 4655 FAX: (86) 10 5869 4677 KED, South Korea Elco, Japan Tel: 045-943-2906/7 FAX: 045-943-2910 Tel: (82) 2 783 3288 FAX: (82) 2 783 3207 KED, Taiwan Tel: (886) 2 2950 0268 FAX: (886) 2 2950 0520 KED, Singapore Tel: (65) 6255 3122 FAX: (65) 6255 5092 Kyocera, Japan - AVX AVX Southwest, AZ Tel: (81) 75-604-3426 FAX: (81) 75-604-3425 Tel: 602-678-0384 FAX: 602-678-0385 Kyocera, Japan - KDP AVX South Central, TX Tel: (81) 75-604-3424 FAX: (81) 75-604-3425 Tel: 214-566-2859 FAX: 972-461-0575 AVX Southeast, GA AVX/Kyocera, Shanghai, China Tel: 404-608-8151 FAX: 770-972-0766 Tel: 86-21 6215 5588 FAX: 86-21 6215 5580 AVX/Kyocera, Beijing, China AVX Canada Tel: 86-10 6588 3528 Fax: 86-10 6588 3529 Tel: 905-238-3151 FAX: 905-238-0319 AVX/Kyocera, Tianjin, China AVX South America Tel: ++55-11-2193-7200 FAX: ++55-11-2193-7210 Contact: Tel: 86-22 8558 9052 Fax: 86-22 5885 9061 A KYOCERA GROUP COMPANY http://www.avx.com S-CEC00M807-C