Introduction Connectors according to IEC 61076-4-101 The 2.0mm hard metric connectors made by AVX are developed and produced in accordance to the international engineering standards IEC 61076-4-101. Because of this users all over the world have a standard for the connection of printed circuit boards with high density connectors. The boards can be changed from one system to another without any problems. Important parameters like alignment, shielding and coding remain compatible beyond the application. This specification has been selected as the CompactPCI® bus architecture by the PCI Industrial Computer Manufacturers Group (PICMG). AVX connectors have been specifically designed to fit in Position P1/P4, J1/J4 and P2/P5; J2/J5 for CompactPCI® applications and P0/J0 in the VME 64 extension format. AVX also offers full custom connector service to meet the specific needs of given markets and systems. THE AVX ADVANTAGE MODULAR SHIELDING • Modular connector system with 2.0mm grid for CompactPCI® backplane and daughter cards. • Insulators are beveled at each end to guarantee accurate positioning on the printed circuit board. • Five, seven and eight signal rows plus two shield rows for optimum transmission performance. CODING To avoid mixing printed circuit boards Type A connectors use coding keys in accordance with IEC61076-4-101. Coding keys are inserted into the multi-function cavity by hand. Modular shielding of female connectors enables high speed data transmission in high frequency application. Reduces the crosstalk level and allows an increase of the performance to subnanosecond pulse rise time if used in a differential pair application. 12 different contact sizes for custom configurations AVX vertical male hard metric connectors have 3 different lengths at the mating side and 4 lengths at the terminal side. The different lengths are required for certain earliest make last break connections on signal or group contacts. APPROVALS AND SPECIFICATIONS TYPE A MULTI-FUNCTION CAVITY & PRE-ALIGNMENT GUIDES AVX hard metric connector system meets the requirements of IEC 61076-4-101. Type A connectors are equipped with a multi-function cavity and pre-alignment guides. The guides ensure proper alignment between the boards during mating. The cavity accepts coding keys in accordance with IEC61076-4-101 to prevent mis-mating of boards. TELCORDIA (FORMERLY GR-1217-CORE RoHS COMPLIANCE The RoHs directive proposed by the European Commission imposes a ban on the following substances: lead, mercury, cadmium, hexavalent chromium, and PBB snd PDBE's (halogenated flame retardants) The RoHs implementation Date is July 1, 2006. AVX 2MM Hard Metric connectors are fully compliant with Directive 2002/95/EC and do not contain any of the substances Prohibited by RoHs for order entries after March, 1, 2006. BELLCORE) AVX hard metric connectors are designed to meet the requirements of Telcordia Technologies (formerly BellCore), GR-1217-Core. ISO9001 The complete hard metric connector system is manufactured in fully approved ISO9001 and QS9000 facilities. PICMG® The hard metric connector system meets the requirements of the CompactPCI® specification as defined by the PCI Industrial Computer Manufacturers Group. PCI Industrial Computer Manufacturers Group, (PICMG), is a consortium of Industrial Computer Product vendors with the mission of designing specifications for PCI-based systems and boards to be used in industrial and telecommunications applications. For more information on PICMG visit their website at www.picmg.org 1 Multi-Line Module Connectors For CompactPCI® TECHNICAL SPECIFICATIONS Contact Spacing Current Rating Voltage Rating Dielectric Withstanding Voltage Insulation Resistance 2.0mm grid 1.0A/contact / 70°C 250V maximum 750VAC rms/minute 104M Ω minimum 104M Ω minimum 20m Ω maximum n x 0.75 N maximum n x 1.00 N maximum n x 0.15 N minimum n x 0.15 N minimum contact / contact contact / shielding Contact Resistance Insertion Force contact inclusive shielding contact inclusive shielding Separation Force Operating Temperature -55° to +125°C MATERIAL Contact Plug Receptacle Plug Receptacle Insulator Phosphor Bronze Phosphor Bronze PBT 30% Glass Filled, UL 94V-0 Rated PBT 30% Glass Filled, UL 94V-0 Rated PBT 30% Glass Filled, UL 94V-0 Rated Glass Filled Polyester, UL 94V-0 Rated Phosphor Bronze Shroud Code Key Ground Return Shields LEAD-FREE COMPATIBLE COMPONENT FINISH SERIES 7200 Finish Code 001 / 004 002 / 005 001 002 male male female female Class 1 2 1 2 Mating Cycle >500 >250 >500 >250 Mating Area Au 1.27µm min. Au 0.80µm min. Au 1.27µm min. Au 0.80µm min. Second Mating Au 1.27µm min. Au 0.80µm min. Press-fit Area Ni 2-4µm min. Ni 2-4µm min. Ni 2-4µm min. Ni 2-4µm min. Other Area Press-fit Area Au 0.05µm SnPb 1.2-2.0µm Au 0.05µm SnPb 1.2-2.0µm FINISH SERIES 8071, 8072, 8077 Finish Code 833 863/517 Class Mating Cycle 2 ≥250 Mating Area Pd/Ni 0.65µm min. Gold 0.1µm min. 2 ≥250 Au 0.76µm min. male female male female COMPLIANT PINS AVX Multi-Line Module Connectors utilize the original VARIPIN™ press-fit technology for reliable solderless applications. 2