IDC For Round Conductor Flat Cable Index Introduction - Your Complete IDC Connector Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 IDC Card Edge Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Series 6338 . . . . . . . . . . . 5-6 Single Row IDC Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Series 8284. . . . . . . . . . . . . 7 Single Row IDC Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Series 8284. . . . . . . . . . . . . 8 Ejector Style Header. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Series 8289 . . . . . . . . . . 9-10 Low Profile IDC Socket Connector. . . . . . . . . . . . . . . . . . . . . . . . . . Series 8290 . . . . . . . . . 11-12 Low Profile Box Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Series 8380 . . . . . . . . . 13-14 High Temperature Box Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Series 8383 . . . . . . . . . 15-16 Dual In-Line IDC Transition Connector . . . . . . . . . . . . . . . . . . . . . . Series 8399 . . . . . . . . . 17-18 DIN 41612 IDC Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Series 8459 . . . . . . . . . . . 19 Connector Approvals File No. 1255749 File No. E90723 Series 8289 8290 6338 8399 8380 IDC P.C.B. Header IDC Socket Connector IDC Card Edge Connector IDC Transition Connector (Dual In-Line) Low Profile Box Header Series 8289 8290 6338 8399 8380 IDC P.C.B. Header IDC Socket Connector IDC Card Edge Connector IDC Transition Connector (Dual In-Line) Low Profile Box Header UL Wiring Harness - 764 File No. E137836 IDC Cable Assemblies NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all applications. 1 Introduction Your Complete IDC Connector Source AVX is approved by B.S.I. to B.S.E.N. ISO 9001 to manufacture a broad line of popular IDC connector configurations for a wide variety of applications: • • • • • • • • Telecommunications Computers & Peripherals Consumer & Business/Office Equipment Robotics Terminals Appliances Automotive Electronics Military & Aerospace Equipment And any other cable-to-board, board-to-board and cableto-cable interface on 0.050" - (1.27mm) and 0.100" (2.54mm) spacing! 2 BENEFITS OF FLAT CABLE MASS TERMINATION • Space efficient and easy to route in tight enclosures • Easy, fast and reliable termination, with controlled centerline spacing • Reliable coplanarity provides accurate spacing from #1 to last conductor • No need for wire stripping, prepping or soldering • Operators easily trained, to achieve minimal error or variability Your Complete IDC Connector Source IDC FOR 0.050" (1.27mm) ROUND CONDUCTOR FLAT CABLE No. of Positions Socket Header Latched Series 8290 Series 8289 4 6 8 9 10 12 14 15 16 20 24 25 26 30 32 34 36 37 40 44 50 52 56 60 64 Accessories Strain Relief Coding Key Polarizing Key Latch / Eject Tooling Base Plate Options PCB Retention Available 䊉 Low Profile Header Series 8380 Card Edge Series Series 8383 6338 High Temp. 2 Row Transition IDC DIN 41612 Series 8399 Series 8459 䊊 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊊 䊊 䊉 䊉 䊉 䊉 䊉 䊊 䊊 䊉 䊉 䊊 䊊 䊉 䊉 䊉 䊊 䊊 䊉 䊊 Consult Sales 䊊 IDC FOR 0.100" (2.54mm) ROUND CONDUCTOR FLAT CABLE No. of Positions Socket Header 8 14 16 18 20 24 Series 8284 䊉 䊉 䊉 䊉 䊉 䊉 Series 8284 䊉 䊉 䊉 䊉 䊉 䊉 COMPATIBILITY & APPROVALS • UL • CSA • Intermateable and interchangeable with many other manufacturers • Compatible with MIL-83503 product 3 Introduction Your Complete IDC Connector Source ADVANCED DESIGN & QUALITY • Contact design pierces the cable insulation, providing a reliable gas-tight termination, with positive electrical characteristics • Contacts accommodate solid or stranded wire • Single beam contact face makes early contact with mating pin to give maximum contact wipe • Industry-standard P.C.B. footprints provide easy circuit routing and efficient use of board real estate • Popular header variations, such as press-fit, straight (vertical) and right-angle (horizontal) through-hole, for a variety of board thicknesses • Headers in 4-wall configurations for pin protection 4 A FULL RANGE OF FEATURES AND ACCESSORIES • Lock & ejects that can accommodate sockets with or without strain relief mechanisms, to avoid stressing cable terminations • Feed-through or closed-end sockets accommodate daisy chain or cable-end applications • Ridged covers and marked #1 contact positions that provide accurate cable to contact alignment • S.M.T. header styles molded in high thermal resistant material • IDC connectors are available in packaging designed for automated cable or P.C.B. assembly Card Edge Connector Series 6338 UL Approved File No. E90732. CSA Approved File No. 1255749. 10, 16, 20, 26, 34, 40, 44, 50 & 60 positions. Copper alloy contacts. Accepts printed circuit boards of 1.6mm thickness. Compatible with other leading manufacturers. TECHNICAL SPECIFICATION Material: Molding - UL94VO rated glass filled grey polyester Contact - Phosphor bronze Contact Plating: Contacts are selective gold-plated over nickel, pure tin on IDC section Current Rating: 1 ampere at 70ºC maximum ambient Voltage Proof: 1050 DC or AC peak Working Voltage: 350V DC or AC peak Operating Temperature: Insulation Resistance: >1000 megohms Wire Gauge: 26 AWG Solid & Stranded 28 AWG Solid & Stranded -55ºC to +105ºC DIMENSIONS: millimeters (inches) No. of Positions 010 016 020 026 030 034 040 044 050 060 A 43.69 (1.72) 51.31 (2.02) 56.39 (2.22) 64.01 (2.52) 69.09 (2.72) 74.17 (2.92) 81.79 (3.22) 86.87 (3.42) 94.49 (3.72) 107.19 (4.22) B 35.56 (1.40) 43.18 (1.70) 48.26 (1.90) 55.88 (2.20) 60.96 (2.40) 66.04 (2.60) 73.66 (2.90) 78.74 (3.10) 86.36 (3.40) 99.06 (3.90) C 9 15 19 25 29 33 39 43 49 59 D 11.43 (0.450) 19.05 (0.750) 24.13 (0.950) 31.75 (1.25) 36.83 (1.45) 41.91 (1.65) 49.53 (1.95) 54.61 (2.15) 62.23 (2.45) 74.93 (2.95) E 24.36 (0.959) 31.98 (1.26) 37.06 (1.46) 44.68 (1.76) 49.76 (1.96) 54.84 (2.16) 62.46 (2.46) 67.54 (2.66) 75.16 (2.96) 87.86 (3.46) F 38.10 (1.50) 45.72 (1.80) 50.80 (2.00) 58.42 (2.30) 63.50 (2.50) 68.58 (2.70) 76.20 (3.00) 81.28 (3.20) 88.90 (3.50 ) 101.60 (4.00) G 33.02 (1.30) 40.64 (1.60) 45.72 (1.80) 53.34 (2.10) 58.42 (2.30) 63.50 (2.50) 71.12 (2.80) 76.20 (3.00) 83.82 (3.30) 96.52 (3.80) H 15.11 (0.595) 22.73 (0.895) 27.81 (1.09) 35.43 (1.39) 40.51 (1.59) 45.59 (1.79) 53.21 (2.09) 58.29 (2.29) 65.91 (2.59) 78.61 (3.09) J 15.34 (0.604) 22.96 (0.904) 28.04 (1.10) 35.66 (1.40) 40.74 (1.60) 45.82 (1.80) 53.44 (2.10) 58.52 (2.30) 66.14 (2.60) 78.84 (3.10) K 5 8 10 13 15 17 202 22 25 30 5 Card Edge Connector Series 6338 ORDERING CODE 6 00 6338 016 000 Connector Code Prefix Series Number Number of Circuits 010 = 10 position 016 = 16 position 020 = 20 position 026 = 26 position 034 = 34 position 040 = 40 position 044 = 44 position 050 = 50 position 060 = 60 position Strain Relief 000 = Without strain relief 02 Plating 02 = Selective Plating 30µ Gold 04 = Selective Plating 10µ Gold 2 Variation Insulator End Flanges 0 = No end flanges 1 = Half end flanges 2 = Full end flanges Single Row IDC Header Series 8284 IDC header/socket for 0.100" (2.54mm) pitch IDC for 0.100" (2.54mm) round conductor flat cable uses similar 8289/8290 contact components recognized under UL & CSA specifications, but housed in a single row insulator format. The header is a 1-piece insulator with right angle, straight solder or press-fit terminations. The socket is a 2-piece insulator design with IDC contacts suitable for termination to 26/28 AWG stranded ribbon cable or dip solder terminations. TECHNICAL SPECIFICATION Material: Molding - UL94VO rated grey polyester Contact - Brass Current Rating: 1.5 Amp maximum at 25ºC 1 Amp maximum at 70ºC Dielectric Withstanding Voltage: 1050V DC or AC peak Mechanical Endurance: Standard tin plating - 10 cycles Voltage Rating: 350V DC or AC peak Insertion/Withdrawal Forces: 2.7N max insertion force per contact 0.2N min withdrawal force per contact Contact Resistance: 20 milliohms maximum Insulation Resistance: 1000 megohms Operating Temperature: -55ºC to +125ºC DIMENSIONS: HEADER millimeters (inches) No. of Positions A 8 14 16 18 20 24 7 13 15 17 19 23 B C D E F G 17.78 (0.70) 33.02 (1.30) 38.10 (1.50) 43.18 (1.70) 48.26 (1.90) 58.42 (2.30) 21.30 (0.84) 36.54 (1.44) 42.22 (1.66) 46.70 (1.84) 52.38 (2.06) 61.94 (2.44) 18.54 (0.73) 33.78 (1.33) 38.86 (1.53) 43.94 (1.73) 49.02 (1.93) 59.18 (2.33) 19.30 (0.76) 34.54 (1.36) 39.62 (1.56) 44.70 (1.76) 49.78 (1.96) 59.94 (2.36) 23.70 (0.93) 38.94 (1.53) 44.02 (1.73) 49.10 (1.93) 54.18 (2.13) 64.34 (2.53) 17.54 (0.69) 32.78 (1.29) 37.86 (1.49) 42.94 (1.69) 48.02 (1.89) 58.18 (2.29) ORDERING CODE 10 8284 014 Connector Code Prefix 10 = Header Connector Series Number Number of Contacts 008 = 8 position 014 = 14 position 016 = 16 position 018 = 18 position 020 = 20 position 024 = 24 position Not all versions are available, please check with AVX Customer Service for availability. 000 Contact Variation 000 = 0.110" (2.8mm) Straight PC Tail 001 = 0.146" (3.7mm) Straight PC Tail 002 = 0.110" (2.8mm) R.A. PC Tail 003 = 0.146" (3.7mm) R.A. PC Tail 009 = 0.209" (4.5mm) Straight PF Tail 030 Plating Variation 030 = Tin plating, 10 cycles 040 = Gold plating, 50 cycles 7 Single Row IDC Socket Series 8284 IDC header/socket for 0.100" (2.54mm) pitch IDC for 0.100" (2.54mm) round conductor flat cable uses similar 8289/8290 contact components recognized under UL & CSA specifications, but housed in a single row insulator format. The header is a 1-piece insulator with right angle, straight solder or press-fit terminations. The socket is a 2-piece insulator design with IDC contacts suitable for termination to 26/28 AWG stranded ribbon cable or dip solder terminations. TECHNICAL SPECIFICATION Material: Molding - UL94VO rated grey polyester Contact - Phosphor bronze Current Rating: 1.5 Amp maximum at 25ºC 1 Amp maximum at 70ºC Dielectric Withstanding Voltage: 1050V DC or AC peak Operating Temperature: -55ºC to +125ºC Voltage Rating: 350V DC or AC peak Mechanical Endurance: Standard tin plating - 10 cycles Contact Resistance: 20 milliohms maximum Insertion/Withdrawal Forces: 2.7N max insertion force per contact 0.2N min withdrawal force per contact Insulation Resistance: 1000 megohms SOCKET DIMENSIONS: millimeters (inches) No. of Positions 8 14 16 18 20 24 B 17.78 (0.70) 33.02 (1.18) 38.10 (1.50) 43.18 (1.70) 48.26 (1.90) 58.42 (2.30) A 7 13 15 17 19 23 C 21.30 (0.84) 36.54 (1.45) 42.22 (1.66) 46.70 (1.84) 52.38 (2.06) 61.94 (2.44) D 18.54 (0.72) 33.78 (1.33) 38.86 (1.53) 43.94 (1.73) 49.02 (1.93) 59.18 (2.33) E 19.30 (0.76) 34.54 (1.36) 39.62 (1.56) 44.70 (1.76) 49.78 (1.96) 59.94 (2.36) F 23.70 (0.93) 38.94 (1.53) 44.02 (1.73) 49.10 (1.93) 54.18 (2.13) 64.34 (2.53) ORDERING CODE 20 8284 Connector Code Prefix 20 = Socket Connector Series Number Not all versions are available, please check with AVX Customer Service for availability. 8 014 Number of Contacts 008 = 8 position 014 = 14 position 016 = 16 position 018 = 18 position 020 = 20 position 024 = 24 position 000 Contact Variation 000 = Standard IDC contact 26/28 AWG 030 Plating Variation 030 = Tin plating, 10 cycles 040 = Gold plating, 50 cycles Ejector Style Header Series 8289 Available in industry standard sizes of 10-64 positions, they mate to AVX Series 8290 IDC sockets, as well as other industry compatible connectors. Solder or press-fit contacts are available in either straight or right angle formats. The four wall design and optional molded in polarizing keys ensure positive polarization without pin loss. Latch/eject levers can also be specified to suit the mating Series 8290 socket, either with or without strain relief. Stand-off are incorporated to facilitate flux washing and de-gassing. TECHNICAL SPECIFICATION Material: Molding - UL94VO rated glass filled grey polyester Contact - Phosphor bronze Contact Plating: Selective gold over nickel plating on the mating face, pure tin in IDC section Current Rating: 1 ampere at 70ºC maximum ambient Insulation Resistance: >1000 megohms Voltage Rating: 350V DC or AC peak Operating Temperature: -55ºC to +125ºC Contact Resistance: Initially 10 milliohms maximum UL File No. E90723 CSA File No. 1255749 Dielectric Withstanding Voltage: 1050 DC or AC peak Latch/Eject Levers Part Numbers when ordered separately. Long (For 8290 socket with strain relief) 60 8289 6301 00 000 Short (For 8290 socket without strain relief) 60 8289 6302 00 000 ORDERING CODE 00 8289 050 Connector Code Prefix 00 = Standard Series Number Number of Contacts 010 = 10 position 014 = 14 position 016 = 16 position 020 = 20 position 026 = 26 position 034 = 34 position 040 = 40 position 050 = 50 position 060 = 60 position 064 = 64 position 002 1 Latch/Eject Lever Contact Termination 002 = Straight PC Tail for 2.4mm PCB 0.142" (3.60mm) 004 = Right Angle PC Tail for 2.4mm PCB - 0.142" (3.60mm) 006 = Straight PC Tail for 1.6mm PCB 0.110" (2.80mm) 007 = Right Angle PCB Tail for 1.6mm PCB - 0.110" (2.80mm) 009 = Press-Fit PC Tail 2.4/3.2mm PCB 0.209" (4.5mm) 0 = No Latch/Eject Lever 1 = Latch/Eject Lever for use with Series 8290 with strain relief 2 = Latch/Eject Lever for use with Series 8290 without strain relief 1 1 Polarization 1 = Type A BS9525 & BT224 Dual Height molding in polarizing key/keys 3 = No Polarizing key/keys Standard Plating 1 = Selective Plating 30µ" Gold over Nickel 4 = Selective Plating 10µ" Gold over Nickel 9 Ejector Style Header Series 8289 DIMENSIONS: millimeters (inches) No. of Ways A B C D 10 10.16 (.040) 21.84 (.860) 27.94 (1.10) 32.11 (1.26) 14 15.24 (.060) 26.92 (1.06) 33.02 (1.30) 37.19 (1.46) 16 17.78 (.070) 29.46 (1.16) 35.56 (1.40) 39.73 (1.56) 20 22.86 (.090) 34.54 (1.36) 40.64 (1.60) 44.81 (1.76) 26 30.48 (1.20) 42.16 (1.66) 40.64 (1.90) 52.43 (2.06) 34 40.64 (1.60) 52.32 (2.06) 58.42 (2.30) 62.59 (2.46) 40 48.26 (1.90) 59.94 (2.36) 66.04 (2.60) 70.21 (2.76) 50 60.96 (2.40) 72.64 (2.86) 78.74 (3.10) 82.91 (3.26) 60 73.66 (2.90) 85.34 (3.36) 91.44 (3.60) 95.61 (3.76) 64 78.74 (3.10) 90.42 (3.56) 96.52 (3.80) 100.69 (3.96) 10 Low Profile IDC Socket Connector Series 8290 Available in industry standard sizes of 10-64 positions. They mate to AVX Series 8289, 8293, 8380 and 8383 headers, as well as other industry compatible connectors. An optional strain relief, which can be easily fitted, eliminates stress on the cable. Contacts are copper alloy for added reliability, and are designed to mate to 0.024" (0.60mm) to 0.025" (0.64mm) square pins. The contact design facilitates maximum wipe on the header pins. (early mate, late break). TECHNICAL SPECIFICATION Material: Molding - UL94VO rated glass filled grey polyester Contact - Phosphor bronze Contact Plating: Contacts are selective gold-plated over nickel, pure tin in IDC section Current Rating: 1 ampere at 70ºC maximum ambient Contact Resistance: Initially, 10 milliohms maximum Voltage Rating: 350V DC or AC peak Operating Temperature: -55ºC to +105ºC Dielectric Withstanding Voltage: 1050V DC or AC peak Wire Gauge: 26 AWG Solid & Stranded 28 AWG Solid & Stranded Insulation Resistance: >1000 megohms ORDERING CODE 00 8290 010 Connector Code Prefix Series Number Number of Circuits 010 = 10 position 014 = 14 position 016 = 16 position 020 = 20 position 026 = 26 position 034 = 34 position 040 = 40 position 044 = 44 position* 050 = 50 position 060 = 60 position 064 = 64 position *44 position connector is only available without strain relief - consult sales office for availability. 000 Strain Relief 000 = Without strain relief (feed thru) Standard 001 = With strain relief (feed thru) Standard 006 = With latching strain relief (feed thru) 01 Plating 01 = 30µ Gold over Nickel 04 = 10µ Gold over Nickel 1 Polarization 1 = With central polarizing boss 2 = Without central polarizing boss see series 8380 page 13 11 Low Profile IDC Socket Connector Series 8290 Dimensions: millimeters (inches) No. of Contacts 10 14 16 20 26 34 40 44 50 60 64 B 10.16 (0.40) 15.24 (0.60) 17.78 (0.70) 22.86 (0.90) 30.48 (1.20) 40.64 (1.60) 48.26 (1.90) 53.34 (2.10) 60.69 (2.39) 73.66 (2.90) 78.74 (3.10) Standard Strain Relief Order Code Latching Strain Relief Order Code Part Numbers when ordered separately Part Numbers when ordered separately 10 position 14 position 16 position 20 position 26 position 34 position 40 position 50 position 60 position 64 position 12 A 17.22 (0.68) 22.30 (0.88) 24.84 (0.98) 29.92 (1.18) 37.54 (1.48) 47.70 (1.88) 55.32 (2.18) 60.40 (2.38) 68.02 (2.68) 80.72 (3.18) 85.80 (3.38) 60 8290 6610 00 000 60 8290 6614 00 000 60 8290 6616 00 000 60 8290 6620 00 000 60 8290 6626 00 000 60 8290 6634 00 000 60 8290 6640 00 000 60 8290 6650 00 000 60 8290 6660 00 000 60 8290 6664 00 000 10 position 14 position 16 position 20 position 26 position 34 position 40 position 50 position 60 position 64 position 60 8290 68 10 000 00 60 8290 68 14 000 00 60 8290 68 16 000 00 60 8290 68 20 000 00 60 8290 68 26 000 00 60 8290 68 34 000 00 60 8290 68 40 000 00 60 8290 68 50 000 00 60 8290 68 60 000 00 60 8290 68 64 000 00 Low Profile Box Header Series 8380 Low profile box headers are available in industry standard sizes of 10-64 positions. They mate to AVX Series 8290 IDC sockets, as well as other industry compatible connectors. Both straight and right angle solder dip pins for PC boards are available together with straight press-fit versions. The connector is shrouded on all four sides for polarization and contact protection. Polarizing keys are molded in for correct socket alignment with contact loss. TECHNICAL SPECIFICATION Material: Molding - UL94VO rated glass filled grey polyester Contact - Brass Contact Plating: Selective gold over nickel plating on the mating face, pure tin on IDC section Current Rating: 1 ampere at 70ºC maximum ambient Insulation Resistance: >1000 megohms Voltage Rating: 350V DC or AC peak Operating Temperature: -55ºC to +105ºC Contact Resistance: Initially 10 milliohms maximum UL File No. E90723 CSA File No. 1255749 Dielectric Withstanding Voltage: >1050 DC or AC peak ORDERING CODE 00 8380 050 Connector Code Prefix 00 = Standard Connector Assembly Series Number Number of Contacts 010 = 10 position 014 = 14 position 016 = 16 position 020 = 20 position 026 = 26 position 034 = 34 position 040 = 40 position 050 = 50 position 060 = 60 position 064 = 64 position NB: Additional plating and tail lengths are available. Consult sales office for availability. 000 Contact Variation 000 = Solder Tail Straight Contact for 1.6mm PCB - Contact Length (2.8mm) 001 = Solder Tail Straight Contact for 2.4mm PCB - Contact Length (3.6mm) 002 = Solder Tail Right Angle Contact for 1.6mm PCB Contact Length (2.8mm) 003 = Solder Tail Right Angle Contact for 2.6mm PCB Contact Length (3.6mm) 009 = Press-Fit Contact for 2.4/3.2 PCB - Contact Length (4.5mm) 01 Plating Variation 01 = 30µ" Gold over Nickel solder 04 = 10µ" Gold over Nickel X Polarization 0 = No Polarizing Keys Standard 2 = Type B Dual Height molded in polarizing key(s) 13 Low Profile Box Header Series 8380 DIMENSIONS: millimeters (inches) No. of Contacts A B C 10 17.90 (0.705) 4 10.16 (0.40) 14 22.98 (0.905) 6 15.24 (0.60) 16 25.52 (1.00) 7 17.78 (0.70) 20 30.60 (1.20) 9 22.86 (0.90) 26 38.22 (1.50) 12 30.48 (1.20) 34 48.38 (1.90) 16 40.64 (1.60) 40 56.00 (2.20) 19 48.26 (1.90) 50 68.70 (2.70) 24 60.96 (2.40) 60 81.40 (3.20) 29 73.66 (2.90) 64 86.48 (3.20) 31 78.74 (3.10) 14 High Temperature Box Header Series 8383 Series 8383 box headers are designed to be suitable for applications using either infra red or vapor phase equipment. These connectors are designed to mate with Series 8290 IDC sockets as well as other industry compatible connectors. TECHNICAL SPECIFICATION Termination Type: Plated Through Hole Contact Plating: Gold over nickel Insulation Resistance: >1000 megohms Termination Pitch: 0.100" (2.54mm) Contact Resistance: Initially 10 milliohms maximum Voltage Rating: 350V DC or AC peak Material: Housing - UL94VO rated high thermal resistant nylon Current Rating: 1 ampere at 70ºC maximum ambient Heat Deflection Temperature: 285ºC Contact - Brass ORDERING CODE 00 8383 050 000 0 1 Connector Code Prefix 00 = Standard Connector Assembly Series Number Number of Contacts 010 = 10 position 014 = 14 position 016 = 16 position 020 = 20 position 026 = 26 position 034 = 34 position 040 = 40 position 050 = 50 position 060 = 60 position 064 = 64 position Contact Variation 000 = Solder PC Straight (1.60mm PCB) Length 2.90mm 001 = Solder PC Right Angle (2.40mm PCB) Length 3.70mm 002 = Solder PC Right Angle (1.6mm PCB) Length 2.90mm 003 = Solder PC Straight (2.40mm PCB) Length 3.70mm 009 = Press Fit contact for 2.4/3.2mm PCB or contact length 4.5mm Clip Variation 0 = No Clip Plating Variation 1 = 30µ" Gold over Nickel 4 = 10µ" Gold over Nickel 0 Polarization 0 = No Polarizing 15 High Temperature Box Header Series 8383 DIMENSIONS: millimeters (inches) No. of Contacts A B C 10 17.90 (0.705) 4 10.16 (0.40) 14 22.98 (0.905) 6 15.24 (0.60) 16 25.52 (1.00) 7 17.78 (0.70) 20 30.60 (1.20) 9 22.86 (0.90) 26 38.22 (1.50) 12 30.48 (1.20) 34 48.38 (1.90) 16 40.64 (1.60) 40 56.00 (2.20) 19 48.26 (1.90) 50 68.70 (2.70) 24 60.96 (2.40) 60 81.40 (3.20) 29 73.66 (2.90) 64 86.48 (3.20) 31 78.74 (3.10) 16 Dual In-Line Transition Connector Series 8399 Series 8399 dual in-line transition connector is available in industry standard sizes of 10-64 positions. It will accommodate Series 2026 0.050" (1.27mm) ribbon cable, and is available with or without strain relief and has an optional cable stop facility. It forms a simple and cost effective method of terminating IDC ribbon cable to a PCB. TECHNICAL SPECIFICATION Voltage Rating: 350V DC or AC peak Operating Temperature: -55ºC to +105ºC Contact - Phosphor bronze Insulation Resistance: >1000 megohms Contact Plating: Pure Tin Dielectric Withstanding Voltage: 1050 DC or AC peak Wire Gauge: 26 AWG Solid & Stranded 28 AWG Solid & Stranded Material: Molding - UL94VO rated glass filled grey polyester UL File No. E90723 CSA File No. 1255749 Current Rating: 1 ampere PCB FOOTPRINT WITHOUT STRAIN RELIEF PCB FOOTPRINT WITH STRAIN RELIEF WITH STRAIN RELIEF WITHOUT STRAIN RELIEF DIMENSIONS: millimeters (inches) No. of Positions 010 014 016 020 026 034 040 050 060 064 A 18.45 (0.726) 23.53 (0.926) 26.07 (1.03) 31.15 (1.23) 38.77 (1.53) 48.93 (1.93) 56.55 (2.23) 69.25 (2.73) 81.95 (3.23) 87.03 (3.42) B 10.16 (.400) 15.24 (.600) 17.78 (.700) 22.86 (.900) 30.48 (1.20) 40.64 (1.60) 48.26 (1.90) 60.96 (2.40) 73.66 (2.90) 78.74 (3.10) P 4 6 7 9 12 16 19 24 39 31 C 20.27 (0.798) 25.65 (1.01) 28.19 (1.11) 33.27 (1.31) 40.89 (1.61) 51.05 (2.01) 58.67 (2.31) 71.37 (2.81) 84.07 (3.31) 89.15 (3.51) 17 Dual In-Line Transition Connector Series 8399 ORDERING CODE 00 8399 016 00 Connector Code Prefix 00 = Standard Series Number Number of Contacts 010 = 10 position 014 = 14 position 016 = 16 position 020 = 20 position 026 = 26 position 034 = 34 position 040 = 40 position 050 = 50 position 060 = 60 position 064 = 64 position Strain Relief 00 = Without strain relief 01 = With strain relief 18 0 Cable Stop 0 = Without cable stop Standard 2 02 Contact 2 = 3.6mm tail phosphor bronze 3 = 2.8mm tail phosphor bronze Plating 02 = Pure Tin IDC DIN Connector Series 8459 Series 8459 IDC DIN connector are based on DIN 41612. This series is loaded with 64 contacts in 2 rows of 32 in rows "A" and "C". Also available is a 1/2 "C" version, with 2 rows of 16 contacts, also loaded in rows "A" and "C". A strain relief is available as an option. Use of the Series 2521 accessory, which is optional, provides a connector latch and eject system from inverted format shells. This connector series will mate with any industry standard DIN connectors that are loaded only in rows "A" and "C". TECHNICAL SPECIFICATION Material: Molding - UL94VO rated grey polyester Contact - Phosphor bronze Contact Plating: Gold over nickel Working Voltage: 350V DC or AC peak Insertion/Withdrawal Force (Mating): 1N max/0.2N min per contact Contact Resistance: 15 milliohms max. Wire Gauge: 26 AWG Solid & Stranded 28 AWG Solid & Stranded Operating Temperature: -55ºC to +125ºC Current Rating per contact at ambient +20ºC 3 amp +70ºC 1.5 amp +100ºC 1 amp ORDERING CODE 20 8459 096 001 Connector Code Prefix Series Number Insulator Size 048 or 096 (See note) Variation 001 = With strain relief 002 = Without strain relief 026 Plating Gold over Nickel 002 = DIN Class III 026 = Class II 050 = Class I Note: 96 position insulator fitted with 2 rows of 32 contacts, rows A and C. 48 position insulator fitted with 2 rows of 16 contacts, rows A and C. DIMENSIONS: millimeters (inches) Insulator Size 048 position (3 x 16) 096 position (3 x 32) A 54.90 (2.16) 94.90 (3.74) B 50.00 (1.97) 90.00 (3.54) C 15 31 D 38.10 (1.50) 78.74 (3.10) E 60.00 (2.36) 100.00 (3.94) F 31 63 G 39.37 (1.55) 80.01 (3.15) 19 Other Products Within The AVX Portfolio CONNECTORS Automotive Connectors DIN 41612 Board-to-Board Connectors - SMT and Thru-Hole Card Edge Memory Card Headers and Sockets Wire-to-Board - Discrete Wire I/O Connectors Custom Designed Connectors PCI Express Connectors Battery Connectors PASSIVES MLC Capacitors Tantalum Capacitors Microwave Capacitors Thin-Film Capacitors Glass Capacitors Chip Resistors Networks EMI Filters Bulk Filters Saw Filters Dielectric Filters Resonators Oscillators Thin-Film Inductors Thin-Film Fuses Voltage Suppressors Acoustical Piezos 20 TPC PRODUCTS Film Capacitors Non Linear Resistors Metal Oxide Varistors Ceramic Disc Capacitors Soft Ferrites Power Capacitors X & Y Suppressor Capacitors AMERICAS EUROPE ASIA-PACIFIC ASIA-KED (KYOCERA Electronic Devices) AVX Greenville, SC AVX Limited, England Tel: 864-967-2150 Tel: +44-1276-697000 AVX Northwest, WA AVX S.A.S., France Tel: 360-699-8746 Tel: +33-1-69-18-46-00 AVX/Kyocera, Asia, Ltd., Hong Kong AVX Midwest, IN AVX GmbH, Germany Tel: +852-2363-3303 Tel: 317-861-9184 Tel: +49-0811-95949-0 AVX/Kyocera (S) Pte Ltd., Singapore KED Hong Kong Ltd. Tel: +852-2305-1080/1223 Tel: +65-6286-7555 AVX Mid/Pacific, CA AVX SRL, Italy AVX/Kyocera Yuhan Hoesa, South Korea Tel: 408-988-4900 Tel: +39-02-614-571 Tel: +82-2785-6504 AVX Northeast, MA AVX Czech Republic Tel: 617-479-0345 Tel: +420-57-57-57-521 AVX/Kyocera HK Ltd., Taiwan KED Hong Kong Ltd. Shenzen Tel: +86-755-3398-9600 KED Company Ltd. Shanghai Tel: +86-21-3255-1833 KED Hong Kong Ltd. Beijing Tel: +86-10-5869-4655 Tel: +886-2-2656-0258 AVX Southwest, CA AVX/ELCO UK Tel: 949-859-9509 Tel: +44-1638-675000 AVX/Kyocera (M) Sdn Bhd, Malaysia AVX Canada ELCO Europe GmbH Tel: +60-4228-1190 Tel: 905-238-3151 Tel: +49-2741-299-0 AVX South America AVX S.A., Spain AVX/Kyocera International Trading Co. Ltd., Shanghai Tel: +55-11-4688-1960 Tel: +34-91-63-97-197 Tel: +86-21-3255 1933 AVX Benelux AVX/Kyocera Asia Ltd., Shenzen Tel: +65-6509-0328 Tel: +86-755-3336-0615 Kyocera Corporation Japan AVX/Kyocera International Trading Co. Ltd., Beijing Tel: +81-75-604-3449 Tel: +31-187-489-337 KED Taiwan Ltd. Tel: +886-2-2950-0268 KED Korea Yuhan Hoesa, South Korea Tel: +82-2-783-3604/6126 KED (S) Pte Ltd. Singapore Tel: +86-10-6588-3528 AVX/Kyocera India Liaison Office Tel: +91-80-6450-0715 Contact: A KYOCERA GROUP COMPANY http://www.avx.com S-IDC0M511-C