FRC5 Series MIL-C-83503 Compatible UL Recognized (File NO.E72124) ●FRC5 series is a family of DDK FRC series delivering laborsaving feature in cable termination, and it meets the MIL Standard. Ｃ FRC5 FEATURE ●UL recognized component (File NO. E72124) ●MIL-C-83503 compatible ●The header is of a double-wall type which pre- vents completely mis-mating. ●Number of contacts : 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 SPECIFICATION Voltage rating Current rating Dielectric withstanding voltage Insulation resistance Contact resistance 250V AC (rms) 1A/contact 500V AC (rms) for 1 minute 1000MΩ min. at 500V DC 15MΩ max. Operating temperature －55℃ to＋105℃ AWG#28 (stranded, solid) AWG#30 (solid) Applicable cable MATERIAL/FINISH Socket Header Housing Cover Contact Strain relief Block Contact Lock Spring Pin PBT resin (UL94V-0)/Black PBT resin (UL94V-0)/Black Copper alloy/Gold over Nickel plating PBT resin (UL94V-0)/Black PBT resin (UL94V-0)/Black Copper alloy/Gold over Nickel plating PBT resin (UL94V-0)/Black Stainless Steel ● 1● FRC5 Series Unit : mm ■ Socket FRC5-A026-3TOS Ｃ CONNECTOR STYLE A : Socket STRAIN RELIEF N : without strain relief (for header with short locks) S : with strain relief (for header with long locks) COVER STYLE (Note) O : Open end Cover A : Closed end Cover POLARIZING KEY O : 10･････････････････････ NO key 14, 16, 20, 26, 30, 34, 40 ･･ 1 key 50, 60, 64 ･･･････････････ 2 key (H＝22.86mm) A : 50, 60, 64 ･･････････････1 key C : 60 ･･･････････････････････ 2 keys (H＝27.94mm） D : 10･････････････････････ 1 key NO. OF CONTACTS 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 CONTACT PLATING 1 : 0.8μ Gold over Nickel 2 : 0.4μ Gold over Nickel 3 : Gold flash over Nickel CONTACT REAR PLATING T : Pb-Sn plating. Note : The cover for 64 pins is an open end type only; a closed end type is not available Open end P/N : FRC2-26-022 ( Closed end P/N : FRC2-26-032 ) Cover Strain relief (P/N : FRC2-26-042) No. of contacts 16.25 14.4 10.65 No. of contacts Polarizing key A B 17.27 22.35 24.89 29.97 10.16 15.24 17.78 22.86 26 30 34 40 50 60 64 37.59 42.67 47.75 55.37 68.07 80.77 85.85 30.48 35.56 40.64 48.26 60.96 73.66 78.74 1 A 3.8 6 NO. OF CONTACTS 10 14 16 20 2.54 B 2.54 FRC5-A□20～A□40-□□O□ FRC5-A□50～A□60-□□A□ Polarizing key marking (in case of 60 pins) FRC5-A□14-□□O□ FRC5-A□10-□□O□ H FRC5-A□50-□□O□ FRC5-A□10-□□D□ FRC5-A□60-□□C□ FRC5-A□60-□□O□ FRC5-A□16-□□O□ 2 ● ● FRC5-AO64-□□O□ FRC5 FRC5 Series Unit : mm ■ Header FRC5-C26L53T-OL (D20) Ｃ FRC5 NO.OF CONTACTS 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 DEVIATION No designation : With only 1 surface gold (standard) plating on the mating area. (D20): With 4 surface gold plating on the mating area. CONTACT TAIL STYLE L : Right angle S : Straight LOCK LEVER L : Long(for socket with strain relief) S : Short(for socket without strain relief) N : No lock CONTACT TAIL LENGTH 3 : 2.34mm 4 : 3.94mm 5 : 2.9mm･･･standard KEY SLOT O : 10 ･･････････････････････No key 14, 16, 20, 26, 30, 34, 40 ･ 1 key 50, 60, 64 ･･･････････････2 keys (H＝22.86mm) A : 50, 60, 64 ･･･････････････1 key C : 60 ･･････････････････････2 keys (H＝27.94mm) D : 10 ･･････････････････････1 key CONTACT PLATING 1 : 0.8μ Gold over Nickel 2 : 0.4μ Gold over Nickel 3 : Gold flash over Nickel CONTACT TAIL PLATING T : Pb/sn plating NO. OF CONTACTS A B C D 10 14 16 20 26 30 34 40 50 60 64 32.00 37.08 39.62 44.70 52.32 57.40 62.48 70.10 82.80 95.50 100.58 21.84 26.92 29.46 34.54 42.16 47.24 52.32 59.94 72.64 85.34 90.42 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 17.25 22.60 25.14 30.22 37.84 42.92 48.00 55.62 68.32 81.02 86.10 E short 42.4 47.5 50.0 55.1 62.7 67.8 72.9 80.5 93.2 105.9 111.0 long 45.6 50.7 53.2 58.3 65.9 71.0 76.1 83.7 96.4 109.1 114.2 ● 3 ● F 27.94 33.02 35.56 40.64 48.26 53.34 58.42 66.04 78.74 91.44 96.52 FRC5 Series Unit : mm Header with long locks E D C 2.54 17.4 FRC5 3.04 0.4 10.56 6.2 J Ｃ B A 4.35 8.2 0.3 2-φ2.6 (For M3 tapping screw) 2 F 0.5 × 0.64 2-φ2.62 Header with short locks Header without a lock 24.3 E FRC5-C14□□□□-O□ FRC5-C16 to FRC5-C40□□□□-O□ FRC5-C10□□□□-D□ FRC5-C50 to FRC5-C60□□□□-A□ FRC5-C50□□□□-O□ Key way marking (in case of 60 pins) FRC5-C60□□□□-C□ C60 5S53T 81・10・01 FRC5-C60□□□□-O□ FRC5-C64□□□□-O□ C16 5S53T DDK DDK 01 10・ 81・ FRC5-C10□□□□-O□ C14 5S53T 1 7・0 82・ 1 7・0 82・ C10 5S53T H 4 ● ● Key way FRC5 Series Unit : mm PCB Mounting Dimensions (as Viewed from Soldering, DIP Side) 2.54 ± 0.1 2.54 ± 0.1 φ3.2 C 2.54 ± 0.1 F Connector Connector C B Right angle contact tail Straight contact tail ■ Long Lock ■ Spring Pin FRC2-01 FRC-03 Material･･･PBT resin (UL94V-O) Material･･･Stainless steel 17.85 5 3.2 ■ Short lock Tool FRC2-02 357J-4502 Material･･･PBT resin (UL94V-O) Use this tool when removing or replacing the lock lever. 15.4 7 3.2 FRC5 0.74 Ｃ φ0.8 ± 0.05 0.25 φ0.8 ± 0.05 2.54 ± 0.1 2-φ3.2 (M3 tapping screw) 2-φ2.8 (M2.6 screw) ● 5 ● FRC5 Series Unit : mm ■ Polarizing Key for Socket ■ Key Guide for Header HU-005 HU-006 A pair of HU-005 consists of an HU-005-1 and an HU-005-2 MATERIAL/FINISH･･････Polycarbonate resin (UL94V-O)/black Ｃ FRC5 MATERIAL/FINISH･･････Polyamide resin (UL94V-O)/natural color HU-006 HU-005-1 HU-005-2 HU-006 ■ Polarizing Guide for Header HU-005 FRC-001 MATERIAL/FINISH･･････Polyamide resin (UL94V-O)/natural color FRC-001 Note : If connectors having same number of contacts are used side by side, wrong insertion between adjacent connectors can be prevented. However, these components are not applicable to 10-pin keyless, or 16-pin connectors. Cable Assembly Tools Cable cutting tool P/N : 357J-4256, Termination tool P/N : 357J-4674D (press) P/N : 357J-4664N (attachment) ● 6 ●