Pin Headers

Pin Headers
2.54 mm Soldered Pin Header Versions
ED. 01 | 04.2014
Original Size Dual Row Pin Header 16 Pins
Catalog E 074636
2.54 mm Pin Headers
DESCRIPTION
GENERAL
Vertical and Right
Angle Pin Headers
ERNI pin connectors are one- and two-row plastic
strips assembled with square 0.64 x 0.64mm pins.
The connector side is completely gold-plated, and
the terminal side is plated with gold flash. Unshrouded
headers are available in different connection lengths
and termination types. Single and dual row connectors can easily be broken off to the desired number
of pins that is required, by using predetermined break
points. Any number of pin connectors can be arranged next to each other in a row. ERNI supplies many
customer-specific solutions of this kind.
2
Catalog E 074636
• Straight versions with solder, THR and SMT termination
• Horizontal versions with solder, THR and SMT
termination
• Single or dual row
• DIN and LPV intermateability
• Flexible manufacturing process
• High temperature material
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DESCRIPTION
TECHNICAL DETAILS
Pitch
2.54 mm
No. of Pins
2 to 14 in step of 2 for Single Row, 4 to 20 in step of 2 for Dual Row
Packaging
Poly bag, Tube or Tape and reel
Current rating per contact
up to 3.0 A at 20 °C
Termination
SMT and THR
Variants
Single row vertical,
Single row right angle,
Dual row vertical,
Dual row right angle
Two different mating lengths
(3mm and 6 mm)
Catalog E 074636
04/14
Edition 1
www.erni.com
3
2.54 mm Pin Headers
ELECTRICAL AND MECHANICAL CHARACTERISTICS
TECHNICAL DATA
Description
Standard
Single Row and Dual Row Pin Headers
Temperature range
Current rating per contact
-40 / 105 °C
IEC60512-5-2 test 5b
3.0 A at 20 °C
Air- and creepage distance
1.8 mm
Operating voltage
IEC 60664
The permissible operating voltages depend on the
customer application and on the applicable or specified
safety requirements. Insulation coordination according
to IEC 60664-1 has to be regarded for the complete
electrical device. Therefore, the maximum creepage and
clearance distances of the mated connectors are specified for consideration as a part of the whole current
path. In practice, reductions in creepage or clearance
distances may occur due to the conductive pattern of
the printed board or the wiring used, and have to be
taken into account separately. As a result the creepage
and clearance distances for the application may be reduced compared to those of the connector.
Dielectric strength
IEC 60512 test 4a
Contact – Contact 1000 Vrms
Contact resistance
IEC 60512 test 2a
< 20 mΩ
Insulation resistance
IEC 60512 test 3a
> 103 MΩ
Mechanical operation
IEC 60512 test 9a
> 100 mating cycles for 10 µ“ Au
> 10 mating cycles for 0.8 µ“ Au
Process Conditions
Solder temperature (max.)
IEC 68-2-20
Hand soldering temp. (max.)
3.5 s at 350 °C
Dip soldering temp. (max.)
10 s at 260 °C
Reflow soldering temp. (max.)
4
JEDEC
J-STD-020C
Catalog E 074636
20 - 40 s at 260 °C
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
ELECTRICAL AND MECHANICAL CHARACTERISTICS
Description
Standard
Single Row and Dual Row Pin Headers
Housing Material
Plastic material
PA9T black
UL flame rating
UL 94 V-0
Contact Material
Base material
Brass
Mating area
Au plating over 30 - 80µ” Ni underplating
Termination area
Au flash over 30 - 80µ” Ni underplating
Catalog E 074636
04/14
Edition 1
www.erni.com
5
2.54 mm Pin Headers
SINGLE ROW, VERTICAL, SMT
PRODUCT SPECIFICATION • Single row pin headers
• SMT termination
• With locating peg
• Two different mating lengths
• Fully automatic assembly
DIMENSIONAL DRAWINGS Mating Length
Recommended Layout
All dimensions in mm.
6
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
SINGLE ROW, VERTICAL, SMT
ORDERING INFORMATION No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
2
6
10
Tube
129133
4
6
10
Tube
129134
6
6
10
Tube
129135
8
6
10
Tube
129136
10
6
10
Tube
129137
12
6
10
Tube
129138
14
6
10
Tube
129139
2
6
10
Tape and reel
129140
4
6
10
Tape and reel
129141
6
6
10
Tape and reel
129142
8
6
10
Tape and reel
129143
10
6
10
Tape and reel
129144
12
6
10
Tape and reel
129145
14
6
10
Tape and reel
129146
2
6
100
Tube
129147
4
6
100
Tube
129148
6
6
100
Tube
129149
8
6
100
Tube
129150
Catalog E 074636
04/14
Edition 1
www.erni.com
7
2.54 mm Pin Headers
SINGLE ROW, VERTICAL, SMT
8
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
10
6
100
Tube
129151
12
6
100
Tube
129152
14
6
100
Tube
129153
2
6
100
Tape and reel
129154
4
6
100
Tape and reel
129155
6
6
100
Tape and reel
129156
8
6
100
Tape and reel
129157
10
6
100
Tape and reel
129158
12
6
100
Tape and reel
129159
14
6
100
Tape and reel
129160
2
3
10
Tube
129162
4
3
10
Tube
129163
6
3
10
Tube
129164
8
3
10
Tube
129165
10
3
10
Tube
129166
12
3
10
Tube
129167
14
3
10
Tube
129168
2
3
10
Tape and reel
129169
4
3
10
Tape and reel
129170
6
3
10
Tape and reel
129171
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
SINGLE ROW, VERTICAL, SMT
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
8
3
10
Tape and reel
129172
10
3
10
Tape and reel
129173
12
3
10
Tape and reel
129174
14
3
10
Tape and reel
129175
2
3
100
Tube
129176
4
3
100
Tube
129177
6
3
100
Tube
129178
8
3
100
Tube
129179
10
3
100
Tube
129180
12
3
100
Tube
129181
14
3
100
Tube
129182
2
3
100
Tape and reel
129183
4
3
100
Tape and reel
129184
6
3
100
Tape and reel
129185
8
3
100
Tape and reel
129186
10
3
100
Tape and reel
129187
12
3
100
Tape and reel
129188
14
3
100
Tape and reel
129189
Catalog E 074636
04/14
Edition 1
www.erni.com
9
2.54 mm Pin Headers
SINGLE ROW, VERTICAL, THR
PRODUCT SPECIFICATION • Single row pin headers
• THR termination
• Two different mating lengths
• Fully automatic assembly
Mating Length
DIMENSIONAL DRAWINGS Recommended Layout
All dimensions in mm.
10
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
SINGLE ROW, VERTICAL, THR
ORDERING INFORMATION No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
2
6
10
Tube
129397
4
6
10
Tube
129398
6
6
10
Tube
129399
8
6
10
Tube
129400
10
6
10
Tube
129401
12
6
10
Tube
129402
14
6
10
Tube
129403
2
6
10
Tape and reel
129404
4
6
10
Tape and reel
129405
6
6
10
Tape and reel
129406
8
6
10
Tape and reel
129407
10
6
10
Tape and reel
129408
12
6
10
Tape and reel
129409
14
6
10
Tape and reel
129410
2
6
10
Poly bag
129411
4
6
10
Poly bag
129412
6
6
10
Poly bag
129413
8
6
10
Poly bag
129414
Catalog E 074636
04/14
Edition 1
www.erni.com
11
2.54 mm Pin Headers
SINGLE ROW, VERTICAL, THR
12
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
10
6
10
Poly bag
129415
12
6
10
Poly bag
129416
14
6
10
Poly bag
129417
2
6
100
Tube
129418
4
6
100
Tube
129419
6
6
100
Tube
129420
8
6
100
Tube
129421
10
6
100
Tube
129422
12
6
100
Tube
129423
14
6
100
Tube
129424
2
6
100
Tape and reel
129425
4
6
100
Tape and reel
129426
6
6
100
Tape and reel
129427
8
6
100
Tape and reel
129428
10
6
100
Tape and reel
129429
12
6
100
Tape and reel
129430
14
6
100
Tape and reel
129431
2
6
100
Poly bag
129432
4
6
100
Poly bag
129433
6
6
100
Poly bag
129434
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
SINGLE ROW, VERTICAL, THR
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
8
6
100
Poly bag
129435
10
6
100
Poly bag
129436
12
6
100
Poly bag
129437
14
6
100
Poly bag
129438
2
3
10
Tube
129440
4
3
10
Tube
129441
6
3
10
Tube
129442
8
3
10
Tube
129443
10
3
10
Tube
129444
12
3
10
Tube
129445
14
3
10
Tube
129446
2
3
10
Tape and reel
129447
4
3
10
Tape and reel
129448
6
3
10
Tape and reel
129449
8
3
10
Tape and reel
129450
10
3
10
Tape and reel
129451
12
3
10
Tape and reel
129452
14
3
10
Tape and reel
129453
2
3
10
Poly bag
129454
4
3
10
Poly bag
129455
Catalog E 074636
04/14
Edition 1
www.erni.com
13
2.54 mm Pin Headers
SINGLE ROW, VERTICAL, THR
14
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
6
3
10
Poly bag
129456
8
3
10
Poly bag
129457
10
3
10
Poly bag
129458
12
3
10
Poly bag
129459
14
3
10
Poly bag
129460
2
3
100
Tube
129461
4
3
100
Tube
129462
6
3
100
Tube
129463
8
3
100
Tube
129464
10
3
100
Tube
129465
12
3
100
Tube
129466
14
3
100
Tube
129467
2
3
100
Tape and reel
129468
4
3
100
Tape and reel
129469
6
3
100
Tape and reel
129470
8
3
100
Tape and reel
129471
10
3
100
Tape and reel
129472
12
3
100
Tape and reel
129473
14
3
100
Tape and reel
129474
2
3
100
Poly bag
129475
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
SINGLE ROW, VERTICAL, THR
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
4
3
100
Poly bag
129476
6
3
100
Poly bag
129477
8
3
100
Poly bag
129478
10
3
100
Poly bag
129479
12
3
100
Poly bag
129480
14
3
100
Poly bag
129481
Catalog E 074636
04/14
Edition 1
www.erni.com
15
2.54 mm Pin Headers
SINGLE ROW, RIGHT ANGLE, SMT
PRODUCT SPECIFICATION • Single row pin headers
• SMT termination
• With locating peg
• Two different mating lengths
• Fully automatic assembly
DIMENSIONAL DRAWINGS Mating Length
Recommended Layout
All dimensions in mm.
16
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
SINGLE ROW, RIGHT ANGLE, SMT
ORDERING INFORMATION No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
2
6
10
Tube
129001
4
6
10
Tube
129002
6
6
10
Tube
129003
8
6
10
Tube
129004
10
6
10
Tube
129005
12
6
10
Tube
129006
14
6
10
Tube
129007
2
6
10
Tape and reel
129008
4
6
10
Tape and reel
129009
6
6
10
Tape and reel
129010
8
6
10
Tape and reel
129011
10
6
10
Tape and reel
129012
12
6
10
Tape and reel
129013
14
6
10
Tape and reel
129014
2
6
100
Tube
129015
4
6
100
Tube
129016
6
6
100
Tube
129017
8
6
100
Tube
129018
Catalog E 074636
04/14
Edition 1
www.erni.com
17
2.54 mm Pin Headers
SINGLE ROW, RIGHT ANGLE, SMT
18
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
10
6
100
Tube
129019
12
6
100
Tube
129020
14
6
100
Tube
129021
2
6
100
Tape and reel
129022
4
6
100
Tape and reel
129023
6
6
100
Tape and reel
129024
8
6
100
Tape and reel
129025
10
6
100
Tape and reel
129026
12
6
100
Tape and reel
129027
14
6
100
Tape and reel
129028
2
3
10
Tube
129030
4
3
10
Tube
129031
6
3
10
Tube
129032
8
3
10
Tube
129033
10
3
10
Tube
129034
12
3
10
Tube
129035
14
3
10
Tube
129036
2
3
10
Tape and reel
129037
4
3
10
Tape and reel
129038
6
3
10
Tape and reel
129039
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
SINGLE ROW, RIGHT ANGLE, SMT
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
8
3
10
Tape and reel
129040
10
3
10
Tape and reel
129041
12
3
10
Tape and reel
129042
14
3
10
Tape and reel
129043
2
3
100
Tube
129044
4
3
100
Tube
129045
6
3
100
Tube
129046
8
3
100
Tube
129047
10
3
100
Tube
129048
12
3
100
Tube
129049
14
3
100
Tube
129050
2
3
100
Tape and reel
129051
4
3
100
Tape and reel
129052
6
3
100
Tape and reel
129053
8
3
100
Tape and reel
129054
10
3
100
Tape and reel
129055
12
3
100
Tape and reel
129056
14
3
100
Tape and reel
129057
Catalog E 074636
04/14
Edition 1
www.erni.com
19
2.54 mm Pin Headers
SINGLE ROW, RIGHT ANGLE, THR
PRODUCT SPECIFICATION • Single row pin headers
• THR termination
• Two different mating lengths
• Fully automatic assembly
DIMENSIONAL DRAWINGS Mating Length
Recommended Layout
All dimensions in mm.
20
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
SINGLE ROW, RIGHT ANGLE, THR
ORDERING INFORMATION No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
2
6
10
Tube
129265
4
6
10
Tube
129266
6
6
10
Tube
129267
8
6
10
Tube
129268
10
6
10
Tube
129269
12
6
10
Tube
129270
14
6
10
Tube
129271
2
6
10
Tape and reel
129272
4
6
10
Tape and reel
129273
6
6
10
Tape and reel
129274
8
6
10
Tape and reel
129275
10
6
10
Tape and reel
129276
12
6
10
Tape and reel
129277
14
6
10
Tape and reel
129278
2
6
100
Tube
129279
4
6
100
Tube
129280
6
6
100
Tube
129281
8
6
100
Tube
129282
Catalog E 074636
04/14
Edition 1
www.erni.com
21
2.54 mm Pin Headers
SINGLE ROW, RIGHT ANGLE, THR
22
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
10
6
100
Tube
129283
12
6
100
Tube
129284
14
6
100
Tube
129285
2
6
100
Tape and reel
129286
4
6
100
Tape and reel
129287
6
6
100
Tape and reel
129288
8
6
100
Tape and reel
129289
10
6
100
Tape and reel
129290
12
6
100
Tape and reel
129291
14
6
100
Tape and reel
129292
2
3
10
Tube
129294
4
3
10
Tube
129295
6
3
10
Tube
129296
8
3
10
Tube
129297
10
3
10
Tube
129298
12
3
10
Tube
129299
14
3
10
Tube
129300
2
3
10
Tape and reel
129301
4
3
10
Tape and reel
129302
6
3
10
Tape and reel
129303
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
SINGLE ROW, RIGHT ANGLE, THR
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
8
3
10
Tape and reel
129304
10
3
10
Tape and reel
129305
12
3
10
Tape and reel
129306
14
3
100
Tape and reel
129307
2
3
100
Tube
129308
4
3
100
Tube
129309
6
3
100
Tube
129310
8
3
100
Tube
129311
10
3
100
Tube
129312
12
3
100
Tube
129313
14
3
100
Tube
129314
2
3
100
Tape and reel
129315
4
3
100
Tape and reel
129316
6
3
100
Tape and reel
129317
8
3
100
Tape and reel
129318
10
3
100
Tape and reel
129319
12
3
100
Tape and reel
129320
14
3
100
Tape and reel
129321
Catalog E 074636
04/14
Edition 1
www.erni.com
23
2.54 mm Pin Headers
DUAL ROW, VERTICAL, SMT
PRODUCT SPECIFICATION • Dual row pin headers
• SMT termination
• With locating peg
• Two different mating lengths
• Fully automatic assembly
DIMENSIONAL DRAWINGS Mating Length
Recommended Layout
All dimensions in mm.
24
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, VERTICAL, SMT
ORDERING INFORMATION No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
4
6
10
Tube
129191
6
6
10
Tube
129192
8
6
10
Tube
129193
10
6
10
Tube
129194
12
6
10
Tube
129195
14
6
10
Tube
129196
16
6
10
Tube
129197
18
6
10
Tube
129198
20
6
10
Tube
129199
4
6
10
Tape and reel
129200
6
6
10
Tape and reel
129201
8
6
10
Tape and reel
129202
10
6
10
Tape and reel
129203
12
6
10
Tape and reel
129204
14
6
10
Tape and reel
129205
16
6
10
Tape and reel
129206
18
6
10
Tape and reel
129207
20
6
10
Tape and reel
129208
Catalog E 074636
04/14
Edition 1
www.erni.com
25
2.54 mm Pin Headers
DUAL ROW, VERTICAL, SMT
26
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
4
6
100
Tube
129209
6
6
100
Tube
129210
8
6
100
Tube
129211
10
6
100
Tube
129212
12
6
100
Tube
129213
14
6
100
Tube
129214
16
6
100
Tube
129215
18
6
100
Tube
129216
20
6
100
Tube
129217
4
6
100
Tape and reel
129218
6
6
100
Tape and reel
129219
8
6
100
Tape and reel
129220
10
6
100
Tape and reel
129221
12
6
100
Tape and reel
129222
14
6
100
Tape and reel
129223
16
6
100
Tape and reel
129224
18
6
100
Tape and reel
129225
20
6
100
Tape and reel
129226
4
3
10
Tube
129228
6
3
10
Tube
129229
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, VERTICAL, SMT
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
8
3
10
Tube
129230
10
3
10
Tube
129231
12
3
10
Tube
129232
14
3
10
Tube
129233
16
3
10
Tube
129234
18
3
10
Tube
129235
20
3
10
Tube
129236
4
3
10
Tape and reel
129237
6
3
10
Tape and reel
129238
8
3
10
Tape and reel
129239
10
3
10
Tape and reel
129240
12
3
10
Tape and reel
129241
14
3
10
Tape and reel
129242
16
3
10
Tape and reel
129243
18
3
10
Tape and reel
129244
20
3
10
Tape and reel
129245
4
3
100
Tube
129246
6
3
100
Tube
129247
8
3
100
Tube
129248
10
3
100
Tube
129249
Catalog E 074636
04/14
Edition 1
www.erni.com
27
2.54 mm Pin Headers
DUAL ROW, VERTICAL, SMT
28
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
12
3
100
Tube
129250
14
3
100
Tube
129251
16
3
100
Tube
129252
18
3
100
Tube
129253
20
3
100
Tube
129254
4
3
100
Tape and reel
129255
6
3
100
Tape and reel
129256
8
3
100
Tape and reel
129257
10
3
100
Tape and reel
129258
12
3
100
Tape and reel
129259
14
3
100
Tape and reel
129260
16
3
100
Tape and reel
129261
18
3
100
Tape and reel
129262
20
3
100
Tape and reel
129263
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, VERTICAL, THR
PRODUCT SPECIFICATION • Dual row pin headers
• THR termination
• Two different mating lengths
• Fully automatic assembly
DIMENSIONAL DRAWINGS Mating Length
Recommended Layout
All dimensions in mm.
Catalog E 074636
04/14
Edition 1
www.erni.com
29
2.54 mm Pin Headers
DUAL ROW, VERTICAL, THR
ORDERING INFORMATION 30
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
4
6
10
Tube
129483
6
6
10
Tube
129484
8
6
10
Tube
129485
10
6
10
Tube
129486
12
6
10
Tube
129487
14
6
10
Tube
129488
16
6
10
Tube
129489
18
6
10
Tube
129490
20
6
10
Tube
129491
4
6
10
Tape and reel
129492
6
6
10
Tape and reel
129493
8
6
10
Tape and reel
129494
10
6
10
Tape and reel
129495
12
6
10
Tape and reel
129496
14
6
10
Tape and reel
129497
16
6
10
Tape and reel
129498
18
6
10
Tape and reel
129499
20
6
10
Tape and reel
129500
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, VERTICAL, THR
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
4
6
10
Poly bag
129501
6
6
10
Poly bag
129502
8
6
10
Poly bag
129503
10
6
10
Poly bag
129504
12
6
10
Poly bag
129505
14
6
10
Poly bag
129506
16
6
10
Poly bag
129507
18
6
10
Poly bag
129508
20
6
10
Poly bag
129509
4
6
100
Tube
129510
6
6
100
Tube
129511
8
6
100
Tube
129512
10
6
100
Tube
129513
12
6
100
Tube
129514
14
6
100
Tube
129515
16
6
100
Tube
129516
18
6
100
Tube
129517
20
6
100
Tube
129518
4
6
100
Tape and reel
129519
6
6
100
Tape and reel
129520
Catalog E 074636
04/14
Edition 1
www.erni.com
31
2.54 mm Pin Headers
DUAL ROW, VERTICAL, THR
32
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
8
6
100
Tape and reel
129521
10
6
100
Tape and reel
129522
12
6
100
Tape and reel
129523
14
6
100
Tape and reel
129524
16
6
100
Tape and reel
129525
18
6
100
Tape and reel
129526
20
6
100
Tape and reel
129527
4
6
100
Poly bag
129528
6
6
100
Poly bag
129529
8
6
100
Poly bag
129530
10
6
100
Poly bag
129531
12
6
100
Poly bag
129532
14
6
100
Poly bag
129533
16
6
100
Poly bag
129534
18
6
100
Poly bag
129535
20
6
100
Poly bag
129536
4
3
10
Tube
129538
6
3
10
Tube
129539
8
3
10
Tube
129540
10
3
10
Tube
129541
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, VERTICAL, THR
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
12
3
10
Tube
129542
14
3
10
Tube
129543
16
3
10
Tube
129544
18
3
10
Tube
129545
20
3
10
Tube
129546
4
3
10
Tape and reel
129547
6
3
10
Tape and reel
129548
8
3
10
Tape and reel
129549
10
3
10
Tape and reel
129550
12
3
10
Tape and reel
129551
14
3
10
Tape and reel
129552
16
3
10
Tape and reel
129553
18
3
10
Tape and reel
129554
20
3
10
Tape and reel
129555
4
3
10
Poly bag
129556
6
3
10
Poly bag
129557
8
3
10
Poly bag
129558
10
3
10
Poly bag
129559
12
3
10
Poly bag
129560
14
3
10
Poly bag
129561
Catalog E 074636
04/14
Edition 1
www.erni.com
33
2.54 mm Pin Headers
DUAL ROW, VERTICAL, THR
34
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
16
3
10
Poly bag
129562
18
3
10
Poly bag
129563
20
3
10
Poly bag
129564
4
3
100
Tube
129565
6
3
100
Tube
129566
8
3
100
Tube
129567
10
3
100
Tube
129568
12
3
100
Tube
129569
14
3
100
Tube
129570
16
3
100
Tube
129571
18
3
100
Tube
129572
20
3
100
Tube
129573
4
3
100
Tape and reel
129574
6
3
100
Tape and reel
129575
8
3
100
Tape and reel
129576
10
3
100
Tape and reel
129577
12
3
100
Tape and reel
129578
14
3
100
Tape and reel
129579
16
3
100
Tape and reel
129580
18
3
100
Tape and reel
129581
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, VERTICAL, THR
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
20
3
100
Tape and reel
129582
4
3
100
Poly bag
129583
6
3
100
Poly bag
129584
8
3
100
Poly bag
129585
10
3
100
Poly bag
129586
12
3
100
Poly bag
129587
14
3
100
Poly bag
129588
16
3
100
Poly bag
129589
18
3
100
Poly bag
129590
20
3
100
Poly bag
129591
Catalog E 074636
04/14
Edition 1
www.erni.com
35
2.54 mm Pin Headers
DUAL ROW, RIGHT ANGLE, SMT
PRODUCT SPECIFICATION • Dual row pin headers
• SMT termination
• With locating peg
• Two different mating lengths
• Fully automatic assembly
DIMENSIONAL DRAWINGS Mating Length
Recommended Layout
All dimensions in mm.
36
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, RIGHT ANGLE, SMT
ORDERING INFORMATION No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
4
6
10
Tube
129059
6
6
10
Tube
129060
8
6
10
Tube
129061
10
6
10
Tube
129062
12
6
10
Tube
129063
14
6
10
Tube
129064
16
6
10
Tube
129065
18
6
10
Tube
129066
20
6
10
Tube
129067
4
6
10
Tape and reel
129068
6
6
10
Tape and reel
129069
8
6
10
Tape and reel
129070
10
6
10
Tape and reel
129071
12
6
10
Tape and reel
129072
14
6
10
Tape and reel
129073
16
6
10
Tape and reel
129074
18
6
10
Tape and reel
129075
20
6
10
Tape and reel
129076
Catalog E 074636
04/14
Edition 1
www.erni.com
37
2.54 mm Pin Headers
DUAL ROW, RIGHT ANGLE, SMT
38
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
4
6
100
Tube
129077
6
6
100
Tube
129078
8
6
100
Tube
129079
10
6
100
Tube
129080
12
6
100
Tube
129081
14
6
100
Tube
129082
16
6
100
Tube
129083
18
6
100
Tube
129084
20
6
100
Tube
129085
4
6
100
Tape and reel
129086
6
6
100
Tape and reel
129087
8
6
100
Tape and reel
129088
10
6
100
Tape and reel
129089
12
6
100
Tape and reel
129090
14
6
100
Tape and reel
129091
16
6
100
Tape and reel
129092
18
6
100
Tape and reel
129093
20
6
100
Tape and reel
129094
4
3
10
Tube
129096
6
3
10
Tube
129097
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, RIGHT ANGLE, SMT
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
8
3
10
Tube
129098
10
3
10
Tube
129099
12
3
10
Tube
129100
14
3
10
Tube
129101
16
3
10
Tube
129102
18
3
10
Tube
129103
20
3
10
Tube
129104
4
3
10
Tape and reel
129105
6
3
10
Tape and reel
129106
8
3
10
Tape and reel
129107
10
3
10
Tape and reel
129108
12
3
10
Tape and reel
129109
14
3
10
Tape and reel
129110
16
3
10
Tape and reel
129111
18
3
10
Tape and reel
129112
20
3
10
Tape and reel
129113
4
3
100
Tube
129114
6
3
100
Tube
129115
8
3
100
Tube
129116
10
3
100
Tube
129117
Catalog E 074636
04/14
Edition 1
www.erni.com
39
2.54 mm Pin Headers
DUAL ROW, RIGHT ANGLE, SMT
40
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
12
3
100
Tube
129118
14
3
100
Tube
129119
16
3
100
Tube
129120
18
3
100
Tube
129121
20
3
100
Tube
129122
4
3
100
Tape and reel
129123
6
3
100
Tape and reel
129124
8
3
100
Tape and reel
129125
10
3
100
Tape and reel
129126
12
3
100
Tape and reel
129127
14
3
100
Tape and reel
129128
16
3
100
Tape and reel
129129
18
3
100
Tape and reel
129130
20
3
100
Tape and reel
129131
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, RIGHT ANGLE, THR
PRODUCT SPECIFICATION • Dual row pin headers
• THR termination
• Two different mating lengths
• Fully automatic assembly
Mating Length
DIMENSIONAL DRAWINGS Recommended Layout
All dimensions in mm.
Catalog E 074636
04/14
Edition 1
www.erni.com
41
2.54 mm Pin Headers
DUAL ROW, RIGHT ANGLE, THR
ORDERING INFORMATION 42
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
4
6
10
Tube
129323
6
6
10
Tube
129324
8
6
10
Tube
129325
10
6
10
Tube
129326
12
6
10
Tube
129327
14
6
10
Tube
129328
16
6
10
Tube
129329
18
6
10
Tube
129330
20
6
10
Tube
129331
4
6
10
Tape and reel
129332
6
6
10
Tape and reel
129333
8
6
10
Tape and reel
129334
10
6
10
Tape and reel
129335
12
6
10
Tape and reel
129336
14
6
10
Tape and reel
129337
16
6
10
Tape and reel
129338
18
6
10
Tape and reel
129339
20
6
10
Tape and reel
129340
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, RIGHT ANGLE, THR
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
4
6
100
Tube
129341
6
6
100
Tube
129342
8
6
100
Tube
129343
10
6
100
Tube
129344
12
6
100
Tube
129345
14
6
100
Tube
129346
16
6
100
Tube
129347
18
6
100
Tube
129348
20
6
100
Tube
129349
4
6
100
Tape and reel
129350
6
6
100
Tape and reel
129351
8
6
100
Tape and reel
129352
10
6
100
Tape and reel
129353
12
6
100
Tape and reel
129354
14
6
100
Tape and reel
129355
16
6
100
Tape and reel
129356
18
6
100
Tape and reel
129357
20
6
100
Tape and reel
129358
4
3
10
Tube
129360
6
3
10
Tube
129361
Catalog E 074636
04/14
Edition 1
www.erni.com
43
2.54 mm Pin Headers
DUAL ROW, RIGHT ANGLE, THR
44
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
8
3
10
Tube
129362
10
3
10
Tube
129363
12
3
10
Tube
129364
14
3
10
Tube
129365
16
3
10
Tube
129366
18
3
10
Tube
129367
20
3
10
Tube
129368
4
3
10
Tape and reel
129369
6
3
10
Tape and reel
129370
8
3
10
Tape and reel
129371
10
3
10
Tape and reel
129372
12
3
10
Tape and reel
129373
14
3
10
Tape and reel
129374
16
3
10
Tape and reel
129375
18
3
10
Tape and reel
129376
20
3
10
Tape and reel
129377
4
3
100
Tube
129378
6
3
100
Tube
129379
8
3
100
Tube
129380
10
3
100
Tube
129381
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
DUAL ROW, RIGHT ANGLE, THR
No. of Pins
Mating Length (mm)
Mating Cycles (min.)
Packaging
Part Number
12
3
100
Tube
129382
14
3
100
Tube
129383
16
3
100
Tube
129384
18
3
100
Tube
129385
20
3
100
Tube
129386
4
3
100
Tape and reel
129387
6
3
100
Tape and reel
129388
8
3
100
Tape and reel
129389
10
3
100
Tape and reel
129390
12
3
100
Tape and reel
129391
14
3
100
Tape and reel
129392
16
3
100
Tape and reel
129393
18
3
100
Tape and reel
129394
20
3
100
Tape and reel
129395
Catalog E 074636
04/14
Edition 1
www.erni.com
45
2.54 mm Pin Headers
PART NUMBER INDEX
46
Part Number
Page
Part Number
Page
129001
17
129027
18
129002
17
129028
18
129003
17
129030
18
129004
17
129031
18
129005
17
129032
18
129006
17
129033
18
129007
17
129034
18
129008
17
129035
18
129009
17
129036
18
129010
17
129037
18
129011
17
129038
18
129012
17
129039
18
129013
17
129040
19
129014
17
129041
19
129015
17
129042
19
129016
17
129043
19
129017
17
129044
19
129018
17
129045
19
129019
18
129046
19
129020
18
129047
19
129021
18
129048
19
129022
18
129049
19
129023
18
129050
19
129024
18
129051
19
129025
18
129052
19
129026
18
129053
19
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
PART NUMBER INDEX
Catalog E 074636
Part Number
Page
Part Number
Page
129054
19
129081
38
129055
19
129082
38
129056
19
129083
38
129057
19
129084
38
129059
37
129085
38
129060
37
129086
38
129061
37
129087
38
129062
37
129088
38
129063
37
129089
38
129064
37
129090
38
129065
37
129091
38
129066
37
129092
38
129067
37
129093
38
129068
37
129094
38
129069
37
129096
38
129070
37
129097
38
129071
37
129098
39
129072
37
129099
39
129073
37
129100
39
129074
37
129101
39
129075
37
129102
39
129076
37
129103
39
129077
38
129104
39
129078
38
129105
39
129079
38
129106
39
129080
38
129107
39
04/14
Edition 1
www.erni.com
47
2.54 mm Pin Headers
PART NUMBER INDEX
48
Part Number
Page
Part Number
Page
129108
39
129135
7
129109
39
129136
7
129110
39
129137
7
129111
39
129138
7
129112
39
129139
7
129113
39
129140
7
129114
39
129141
7
129115
39
129142
7
129116
39
129143
7
129117
39
129144
7
129118
40
129145
7
129119
40
129146
7
129120
40
129147
7
129121
40
129148
7
129122
40
129149
7
129123
40
129150
7
129124
40
129151
8
129125
40
129152
8
129126
40
129153
8
129127
40
129154
8
129128
40
129155
8
129129
40
129156
8
129130
40
129157
8
129131
40
129158
8
129133
7
129159
8
129134
7
129160
8
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
PART NUMBER INDEX
Catalog E 074636
Part Number
Page
Part Number
Page
129162
8
129188
9
129163
8
129189
9
129164
8
129191
25
129165
8
129192
25
129166
8
129193
25
129167
8
129194
25
129168
8
129195
25
129169
8
129196
25
129170
8
129197
25
129171
8
129198
25
129172
9
129199
25
129173
9
129200
25
129174
9
129201
25
129175
9
129202
25
129176
9
129203
25
129177
9
129204
25
129178
9
129205
25
129179
9
129206
25
129180
9
129207
25
129181
9
129208
25
129182
9
129209
26
129183
9
129210
26
129184
9
129211
26
129185
9
129212
26
129186
9
129213
26
129187
9
129214
26
04/14
Edition 1
www.erni.com
49
2.54 mm Pin Headers
PART NUMBER INDEX
50
Part Number
Page
Part Number
Page
129215
26
129242
27
129216
26
129243
27
129217
26
129244
27
129218
26
129245
27
129219
26
129246
27
129220
26
129247
27
129221
26
129248
27
129222
26
129249
27
129223
26
129250
28
129224
26
129251
28
129225
26
129252
28
129226
26
129253
28
129228
26
129254
28
129229
26
129255
28
129230
27
129256
28
129231
27
129257
28
129232
27
129258
28
129233
27
129259
28
129234
27
129260
28
129235
27
129261
28
129236
27
129262
28
129237
27
129263
28
129238
27
129265
21
129239
27
129266
21
129240
27
129267
21
129241
27
129268
21
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
PART NUMBER INDEX
Catalog E 074636
Part Number
Page
Part Number
Page
129269
21
129296
22
129270
21
129297
22
129271
21
129298
22
129272
21
129299
22
129273
21
129300
22
129274
21
129301
22
129275
21
129302
22
129276
21
129303
22
129277
21
129304
23
129278
21
129305
23
129279
21
129306
23
129280
21
129307
23
129281
21
129308
23
129282
21
129309
23
129283
22
129310
23
129284
22
129311
23
129285
22
129312
23
129286
22
129313
23
129287
22
129314
23
129288
22
129315
23
129289
22
129316
23
129290
22
129317
23
129291
22
129318
23
129292
22
129319
23
129294
22
129320
23
129295
22
129321
23
04/14
Edition 1
www.erni.com
51
2.54 mm Pin Headers
PART NUMBER INDEX
52
Part Number
Page
Part Number
Page
129323
42
129349
43
129324
42
129350
43
129325
42
129351
43
129326
42
129352
43
129327
42
129353
43
129328
42
129354
43
129329
42
129355
43
129330
42
129356
43
129331
42
129357
43
129332
42
129358
43
129333
42
129360
43
129334
42
129361
43
129335
42
129362
44
129336
42
129363
44
129337
42
129364
44
129338
42
129365
44
129339
42
129366
44
129340
42
129367
44
129341
43
129368
44
129342
43
129369
44
129343
43
129370
44
129344
43
129371
44
129345
43
129372
44
129346
43
129373
44
129347
43
129374
44
129348
43
129375
44
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
PART NUMBER INDEX
Catalog E 074636
Part Number
Page
Part Number
Page
129376
44
129403
11
129377
44
129404
11
129378
44
129405
11
129379
44
129406
11
129380
44
129407
11
129381
44
129408
11
129382
45
129409
11
129383
45
129410
11
129384
45
129411
11
129385
45
129412
11
129386
45
129413
11
129387
45
129414
11
129388
45
129415
12
129389
45
129416
12
129390
45
129417
12
129391
45
129418
12
129392
45
129419
12
129393
45
129420
12
129394
45
129421
12
129395
45
129422
12
129397
11
129423
12
129398
11
129424
12
129399
11
129425
12
129400
11
129426
12
129401
11
129427
12
129402
11
129428
12
04/14
Edition 1
www.erni.com
53
2.54 mm Pin Headers
PART NUMBER INDEX
54
Part Number
Page
Part Number
Page
129429
12
129456
14
129430
12
129457
14
129431
12
129458
14
129432
12
129459
14
129433
12
129460
14
129434
12
129461
14
129435
13
129462
14
129436
13
129463
14
129437
13
129464
14
129438
13
129465
14
129440
13
129466
14
129441
13
129467
14
129442
13
129468
14
129443
13
129469
14
129444
13
129470
14
129445
13
129471
14
129446
13
129472
14
129447
13
129473
14
129448
13
129474
14
129449
13
129475
14
129450
13
129476
15
129451
13
129477
15
129452
13
129478
15
129453
13
129479
15
129454
13
129480
15
129455
13
129481
15
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
PART NUMBER INDEX
Catalog E 074636
Part Number
Page
Part Number
Page
129483
30
129509
31
129484
30
129510
31
129485
30
129511
31
129486
30
129512
31
129487
30
129513
31
129488
30
129514
31
129489
30
129515
31
129490
30
129516
31
129491
30
129517
31
129492
30
129518
31
129493
30
129519
31
129494
30
129520
31
129495
30
129521
32
129496
30
129522
32
129497
30
129523
32
129498
30
129524
32
129499
30
129525
32
129500
30
129526
32
129501
31
129527
32
129502
31
129528
32
129503
31
129529
32
129504
31
129530
32
129505
31
129531
32
129506
31
129532
32
129507
31
129533
32
129508
31
129534
32
04/14
Edition 1
www.erni.com
55
2.54 mm Pin Headers
PART NUMBER INDEX
56
Part Number
Page
Part Number
Page
129535
32
129562
34
129536
32
129563
34
129538
32
129564
34
129539
32
129565
34
129540
32
129566
34
129541
32
129567
34
129542
33
129568
34
129543
33
129569
34
129544
33
129570
34
129545
33
129571
34
129546
33
129572
34
129547
33
129573
34
129548
33
129574
34
129549
33
129575
34
129550
33
129576
34
129551
33
129577
34
129552
33
129578
34
129553
33
129579
34
129554
33
129580
34
129555
33
129581
34
129556
33
129582
35
129557
33
129583
35
129558
33
129584
35
129559
33
129585
35
129560
33
129586
35
129561
33
129587
35
Catalog E 074636
04/14
Edition 1
www.erni.com
2.54 mm Pin Headers
PART NUMBER INDEX
Catalog E 074636
Part Number
Page
Part Number
Page
129588
35
129590
35
129589
35
129591
35
04/14
Edition 1
www.erni.com
57
2.54 mm Pin Headers
THE ERNI-GROUP
OUR MANUFACTURING LOCATIONS
Germany
China
USA
Thailand
Switzerland
58
Catalog E 074636
04/14
Edition 1
www.erni.com
ERNI Electronics GmbH & Co. KG
Europe South America Africa Japan
Seestrasse 9
73099 Adelberg
Germany
Tel +49 7166 50-0
Fax +49 7166 50-282
[email protected]
www.erni.com
ERNI Electronics, Inc.
North America Canada Mexico
2201 Westwood Ave
Richmond, VA 23230/USA
Tel +1 804 228-4100
Fax +1 804 228-4099
[email protected]
ERNI Asia Holding Pte Ltd.
Asia Australia New Zealand
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625
Tel +65 6 555 5885
Fax +65 6 555 5995
[email protected]
© ERNI Electronics GmbH & Co. KG 2014 • Printed in Germany • A policy of continuous improvement is followed and the right to
alter any published data without notice is reserved.
ERNI ®, ERNI WoR&D ®, Act. Connect. Perfect ®, MicroCon ®, MicroStac ®, MicroSpeed ®, MiniBridge ®, MiniMez ®, MaxiBridge ®,
ERmet ®, ERmet ZD ®, ERmet ZDplus ®, ERmet ZD HD ®, ERbic ®, ERNIPRESS ®, INTERact ®, BLUEcontact ® and WHITEspeed ® are
trademarks (registered or applied for in various countries) of ERNI Electronics GmbH & Co. KG.