M12 Right Angle Connectors ED. 05 | 07.2015 F u l l - S c a l e 5 - p i n Fe m a l e C o n n e c t o r Catalog E 074617 M12 - Right Angle Connectors GENERAL STANDARD SOLUTIONS M12 - Male and Female Connectors Design Features • extremely space saving due to be placed on PCB central axis • identical Layout for male and female version • 3 - 8 pin configuration • gold plated contacts • IP 65/67 mated and locked condition • suitable for potting after assembly due to optional O-Ring • male and female can be used with housings which provide integrated M12 threads • optional 360° shield ring 2 Catalog E 074617 • integrated brackets for 3 different frequently-used PCB thicknesses, 1.0 / 1.6 / 2.0 mm • cylindrical base version, which is also usable for M12 sensor pipes • high CTI-value of 600 for rough environmental applications • UL listed polymer plastic • early mate last break option for pin 5 • mating side according IEC 61076 – 2 – 101 • A-, B- and D-Coding • UL E84703 listed 07/15 Editon 5 www.erni.com M12 - Right Angle Connectors GENERAL STANDARD SOLUTIONS Processing Features • first M12 90° version which has full capability for automated pick and place assembly • T&R packaging • integrated pick & place area • pegs and integrated PCB support areas ensure a secure position while soldering • extremely robust due to pins soldered on top an bottom side of the PCB • lead-free reflow compatible • rear mounting of the final assembled PCB in a housing For technical data refer to ERNI document 225407 SENSOR PIPE SOLUTIONS This new development is an innovative product that have never been existed before. It completes the ERNI M12 connector range with a M12 male connector which targets specially the sensor industry, where mostly one single male connector is used for a device. To save cost and ensure high quality levels, the connector can be fully handled within a standard SMT assembly line. Mating side according IEC 61076 – 2 – 101. Design Features • extremely short version 14 mm length • specially designed for M12 sensor pipes • front mounting of final assembled PCB into the sensor pipe • sealing option with O-ring • versions with anti twist protection • additional features see standard version Catalog E 074617 07/15 Edition 5 www.erni.com 3 M12 - Right Angle Connectors ASSEMBLY AND SOLDER RECOMMENDATIONS PCB THICKNESS The connector has integrated PCB support points, which are able to adapt the 3 frequently-used PCB thicknesses. The thickest PCB could be 2.0 mm followed by the favorite 1.6 mm and further followed by the thinnest 1.0 mm. Note: Also other thicknesses in between of the mentioned range can be used, if the non centric position of the connector, in this case is taken into account. The support points have to be considered according the chosen PCB thickness, see drawing left hand side. The PCB has to be designed to provide those supports. For exact dimensions, mechanical CAD-files can be provided. ASSEMBLY PROCESS Printing of solder paste 4 Automated Assembly Bemerkungen • generally a certain mounting force is required Nozzle when using the THR solder process Pick&Place • Special-Nozzles may be necessary • machine capability must be checked upfront area Catalog E 074617 07/15 Editon 5 www.erni.com M12 - Right Angle Connectors DIMENSIONS AND ASSEMBLY RECOMMENDATION STANDARD M12 MALE (5-PIN) WITH ERNI LOCKING SHELL 7,5 mm Gewinde-Löcher / Thread holes 7,5 mm Standard-Löcher / Standard holes 1-4 mm M14x1 1-2 mm 14.1 Mutter / Nut Montageloch für Verdrehschutz / Assembly hole for twist protection 7,5 mm 1-2 mm 12.3 14.1 Mutter / Nut 21 min M12 FEMALE (5-PIN) WITH ERNI LOCKING SHELL 7,5 mm Gewinde-Löcher / Thread holes M14x1 1-4 mm 7,5 mm Standard-Löcher / Standard holes 14.1 1-2 mm Mutter / Nut Montageloch für Verdrehschutz / Assembly hole for twist protection 7,5 mm 14.1 12.3 1-2 mm Mutter / Nut 21 min See product drawing or recommendations for use the M12 90° connectors together with housings which have already an integrated M12 thread (ERNI document 225406). Catalog E 074617 07/15 Edition 5 www.erni.com 5 M12 - Right Angle Connectors ASSEMBLY EXAMPLE FOR SENSOR PIPE REAR MOUNTING SENSOR PIPE PCB mounting direction FRONT MOUNTING SENSOR PIPE PCB mounting direction 6 Catalog E 074617 07/15 Editon 5 www.erni.com M12 - Right Angle Connectors LAYOUT, SHIELDING, PACKAGING AND SEALING OPTIONS LAYOUT RECOMMENDATION Sensor Pipe Application Standard Application Unshielded version Shielded version Solder paste Solder paste with solder Preform 5-pin version please refer to document 225321; 8-pin version refer to document 225508 SHIELDING The optional shield ring is soldered with two pins to the pcb. Electrical contact to the locking shell is given by three contact tongues placed at the outer contour of the shield ring. PACKAGING Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 250 Stück - Packaging unit: 250 pcs integrated Pick & Place are 44,5 150 330 Catalog E 074617 07/15 Edition 5 www.erni.com 7 M12 - Right Angle Connectors LAYOUT, SHIELDING, PACKAGING AND SEALING OPTIONS SEALING OPTIONS M12 90° MALE CONNECTORS O-Ring sealing; locking shell / customer housing O-Ring sealing; connector / locking shell Minimal air gap at the stopping edge for resin, if potting is applied SEALING OPTIONS M12 90°FEMALE CONNECTORS Identical to male version; but an additional O-Ring is needed for sealing the connector interface acc. IEC-Standard. 8 Catalog E 074617 07/15 Editon 5 www.erni.com M12 - Right Angle Connectors MALE CONNECTORS FOR STANDARD APPLICATIONS END ASSEMBLY REAR MOUNT • • • • • right angle male rear mount with or without O-Ring 3, 4, 5 and 8-pin shielded and unshielded versions Part Number Part Number unshielded shielded no 225259 225261 1, 2, 3, 4 no 225252 225255 A 1, 2, 3, 4 yes – 235171 4 D 1, 2, 3, 4 no 225263 225264 5 A 1, 2, 3, 4, 5 no 225251 225254 5 A 1, 2, 3, 4, 5 yes 225456 235165 5 A 1, 2, 3, 4, 5v no 225253 225256 5 B 1, 2, 3, 4, 5 no 225258 225260 8 A 1, 2, 3, 4, 5, 6, 7, 8 no 225294 225295 8 A 1, 2, 3, 4, 5, 6, 7, 8 yes 225454 235045 No. of Pins Coding Loaded Pins O-Ring 3 B 2, 4, 5 4 A 4 v = early mate last break Catalog E 074617 07/15 Edition 5 www.erni.com 9 M12 - Right Angle Connectors MALE CONNECTORS FOR STANDARD APPLICATIONS END ASSEMBLY REAR MOUNT AND ADDITIONAL ANTI TWIST PROTECTION No. of Pins Coding Loaded Pins O-Ring 8 A 1, 2, 3, 4, 5, 6, 7, 8 yes Part Number Part Number unshielded shielded 225614 – Used with locking shell 235635. OPTIONAL ACCESSORIES 10 Description Usage Part Number O-Ring, 7.2 x 0.8, Viton sealing option between connector and locking shell 225360 M12Locking shell for male connectors 225361 M12 Locking shell for male connectors with anti twist protection 235635 O-Ring, 14 x 1 sealing option between housing and locking shell 834899 M12 Protection cap for male connectors 374342 Catalog E 074617 07/15 Editon 5 www.erni.com M12 - Right Angle Connectors MALE CONNECTORS FOR STANDARD APPLICATIONS END ASSEMBLY REAR MOUNT, DI TYPE • • • • • right angle male rear mount, DI with or without O-Ring 4, 5 and 8-pin shielded and unshielded versions Part Number Part Number unshielded shielded no 225267 225270 1, 2, 3, 4 yes 235042 – by customer 1, 2, 3, 4, 5 no 225266 225269 5 by customer 1, 2, 3, 4, 5v no 225268 225271 8 by customer 1, 2, 3, 4, 5, 6, 7, 8 no 225297 225298 No. of Pins Coding Loaded Pins O-Ring 4 by customer 1, 2, 3, 4 4 by customer 5 v = early mate last break OPTIONAL ACCESSORIES Description Usage Part Number O-Ring, 7.2 x 0.8, Viton Sealing option between connector and customer housing 225360 O-Ring can be used in reflow solder process. Catalog E 074617 07/15 Edition 5 www.erni.com 11 M12 - Right Angle Connectors MALE CONNECTORS FOR SENSOR PIPE APPLICATIONS END ASSEMBLY FRONT MOUNT • • • • • right angle male front mount with O-Ring 3, 4, 5 and 8-pin shielded and unshielded versions Part Number Part Number unshielded shielded yes 225244 225248 1, 2, 3, 4 yes 225243 225247 A 1, 2, 3, 4, 5 yes 225242 225246 5 A 1, 2, 3, 4, 5v yes 225245 225249 8 A 1, 2, 3, 4, 5, 6, 7, 8 yes 225291 225292 No. of Pins Coding Loaded Pins O-Ring 3 A 1, 3, 4 4 A 5 v = early mate last break OPTIONAL ACCESSORIES 12 Description Usage Part Number M12 Protection cap for male connectors 374342 Catalog E 074617 07/15 Editon 5 www.erni.com M12 - Right Angle Connectors MALE CONNECTORS FOR SENSOR PIPE APPLICATIONS END ASSEMBLY FRONT MOUNT, ANTI TWIST VERSION Part Number Part Number unshielded shielded yes 225517 225520 1, 2, 3, 4 yes 225516 225519 A 1, 2, 3, 4, 5 yes 225515 225518 A 1, 2, 3, 4, 5, 6, 7, 8 yes 225521 225522 Part Number Part Number unshielded shielded 225459 – No. of Pins Coding Loaded Pins O-Ring 3 A 1, 3, 4 4 A 5 8 END ASSEMBLY FRONT MOUNT, SNAP-IN VERSION No. of Pins Coding Loaded Pins O-Ring 5 A 1, 2, 3, 4, 5 yes Catalog E 074617 07/15 Edition 5 www.erni.com 13 M12 - Right Angle Connectors FEMALE CONNECTORS FOR STANDARD APPLICATIONS END ASSEMBLY REAR MOUNT • • • • • 14 right angle female rear mount with or without O-Ring 3, 4, 5 and 8-pin shielded and unshielded versions Part Number Part Number unshielded shielded no 225279 225281 1, 2, 3, 4 no 225274 225276 A 1, 2, 3, 4 yes 225458 – 4 D 1, 2, 3, 4 no 225283 225284 5 A 1, 2, 3, 4, 5 no 225273 225275 5 A 1, 2, 3, 4, 5 yes 225457 235164 5 B 1, 2, 3, 4, 5 no 225278 225280 8 A 1, 2, 3, 4, 5, 6, 7, 8 no 225300 225301 8 A 1, 2, 3, 4, 5, 6, 7, 8 yes 225455 – No. of Pins Coding Loaded Pins O-Ring 3 B 2, 4, 5 4 A 4 Catalog E 074617 07/15 Editon 5 www.erni.com M12 - Right Angle Connectors FEMALE CONNECTORS FOR STANDARD APPLICATIONS END ASSEMBLY REAR MOUNT AND ADDITIONAL ANTI TWIST PROTECTION No. of Pins Coding Loaded Pins O-Ring 8 A 1, 2, 3, 4, 5, 6, 7, 8 yes Part Number Part Number unshielded shielded 225615 – Used with locking shell 235636. OPTIONAL ACCESSORIES Description Usage Part Number O-Ring, 7.2 x 0.8, Viton sealing option between connector and locking shell 225360 O-Ring, 7 x 1, Viton sealing option cable side 835284 O-Ring, 8.1 x 1.6, Viton sealing option cable side alternativ 225588 M12 Locking shell for female connectors 225362 M12 Locking shell for female connectors with anti twist protection 235636 O-Ring, 14 x 1 sealing option between housing and locking shell 834899 M12 Protection cap for female connectors 347343 Catalog E 074617 07/15 Edition 5 www.erni.com 15 M12 - Right Angle Connectors FEMALE CONNECTORS FOR STANDARD APPLICATIONS END ASSEMBLY REAR MOUNT, DI TYP • • • • • right angle female rear mount, DI with or without O-Ring 4, 5 and 8-pin shielded and unshielded versions Part Number Part Number unshielded shielded no 225287 225289 1, 2, 3, 4, 5 no 225286 225288 1, 2, 3, 4, 5, 6, 7, 8 no 225303 225304 No. of Pins Coding Loaded Pins O-Ring 4 by customer 1, 2, 3, 4 5 by customer 8 by customer OPTIONAL ACCESSORIES Description Usage Part Number O-Ring, 7.2 x 0.8, Viton sealing option between connector and customer housing 225360 O-Ring, 7 x 1, Viton sealing option cable side 835284 O-Ring 225360 can be used in reflow solder process. 16 Catalog E 074617 07/15 Editon 5 www.erni.com M12 - Right Angle Connectors ASSEMBLY PROCESS IMAGES PCB with solder paste PCB with solder paste and Pre-Form Multiple printed pcb in assembly machine Connector placed into solder paste Male solder joints Female solder joints Catalog E 074617 07/15 Edition 5 www.erni.com 17 M12 - Right Angle Connectors ASSEMBLY PRODUCT IMAGES 18 Catalog E 074617 07/15 Editon 5 www.erni.com ERNI Electronics GmbH & Co. KG Seestrasse 9 73099 Adelberg Deutschland Tel +49 7166 50-0 Fax +49 7166 50-282 [email protected] Europe South America Africa Japan www.erni.com ERNI Electronics, Inc. North America Canada Mexico 2201 Westwood Ave Richmond, VA 23230/USA Tel +1 804 228-4100 Fax +1 804 228-4099 [email protected] ERNI Asia Holding Pte Ltd. Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore 569625 Tel +65 6 555 5885 Fax +65 6 555 5995 [email protected] Asia Australia New Zealand © ERNI Electronics GmbH & Co. KG 2015 • Printed in Germany • A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. ERNI ®, ERNI WoR&D ®, Act. Connect. Perfect ®, MicroCon ®, MicroStac ®, MicroSpeed ®, MiniBridge ®, MaxiBridge ®, ERmet ®, ERmet ZD ®, ERmet ZDplus ®, ERmet ZD HD ®, ERbic ®, ERNIPRESS ®, INTERact ®, BLUEcontact ® and WHITEspeed ® are trademarks (registered or applied for in various countries) of ERNI Electronics GmbH & Co. KG.