MicroSpeed Power Modules ® www.erni.com Catalog Katalog D E 074587 074518 Ausgabe 09/08 3, 03/05 www.erni.com Edition 1 1 www.erni.com Catalog E 074587 09/08 Edition 1 MicroSpeed® Power Modules Table of Contents General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Mating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Board-to-Board Height Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical and Mechanical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Male Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Female Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Catalog E 074587 09/08 Edition 1 www.erni.com 1 MicroSpeed® Power Modules General This complementary range of Power Module connectors, with 2.0 mm contact pitch, fulfils the need for miniaturized and high reliability power systems, and offers a large number of options for mezzanine applications. One of its unique features is its high current-carrying capacity in comparison to its small size. Therefore, the system is ideally suited for use with small, high performance devices such as CPUs, drives, LCD panels, etc. Providing a variety of height versions of the male and female connectors, the Power Module series enables stacking heights from 5 mm to 20 mm. Subsequently, almost every need for different PCB arrangements can be addressed. Another major advantage is the multiple-connector mating capability, which allows the mating of more than one connector pair at the same time. The SMT connectors meet all the needs of fast automatic assembly machines. They are manufactured and 100% inline quality checked by machine to ensure high coplanarity and optimized soldering. The layout is designed with an optimal solder pad size to guarantee high retention forces. The integrated 3-point double beam female contact ensures durable low-contact resistance over the whole lifecycle. 2Catalog E 074587 The contacts are post plated, leaving no bare edges in the contact and solder areas. The connectors are equipped with polarized positioning pegs, and the connector plating is lead free, complying with the European RoHS directive. 09/08 Edition 1 www.erni.com MicroSpeed® Power Modules Mating Conditions Allowed misalignment tolerances longitudinal and transverse axes ±0.7 mm 0,7 0,7 4° Allowed angular inclination tolerances longitudinal: ±4°; transverse: ±2° 2° 5,0 - 20,0 1,5 Wipe length 1.5 mm / Board-to-Board distance 5-20 mm (including wipe length up to 21.5 mm) All dimensions in mm. Catalog E 074587 09/08 Edition 1 www.erni.com 3 MicroSpeed® Power Modules Board-to-Board Height Configurations Male Female Height Part Number SMD Part Number THR Height Part Number SMD Part Number THR Boart-to-Board Height 1 mm 214357 214916 4 mm 214356 214912 5 mm 2 mm 214550 214917 4 mm 214356 214912 6 mm 1 mm 214357 214916 6 mm 214547 214913 7 mm 2 mm 214550 214917 6 mm 214547 214913 8 mm 1 mm 214357 214916 8 mm 214548 214914 9 mm 2 mm 214550 214917 8 mm 214548 214914 10 mm 1 mm 214357 214916 10 mm 214549 214915 11 mm 2 mm 214550 214917 10 mm 214549 214915 12 mm 9 mm 214551 214918 4 mm 214356 214912 13 mm 10 mm 214552 214919 4 mm 214356 214912 14 mm 9 mm 214551 214918 6 mm 214547 214913 15 mm 10 mm 214552 214919 6 mm 214547 214913 16 mm 9 mm 214551 214918 8 mm 214548 214914 17 mm 10 mm 214552 214919 8 mm 214548 214914 18 mm 9 mm 214551 214918 10 mm 214549 214915 19 mm 10 mm 214552 214919 10 mm 214549 214915 20 mm 4Catalog E 074587 09/08 Edition 1 www.erni.com MicroSpeed® Power Modules Electrical and Mechanical Characteristics Number of Pins Technical data Climate category Temperature range Current rating Air – and creepage distance Voltage rating Dielectric strength Contact resistance Insulation resistance Vibration, sine Contact disturbance (while vibration test) Mechanical operation (mating cycles) Insertion and withdrawal force Gauge retention force Catalog E 074587 DIN EN 60068-1 test b Shock, halfsine Contact disturbance (while shock test) Standard IEC 60512 test 4a IEC 60512 test 2a IEC 60512 test 3a IEC 60512 test 6d IEC 60512 test 2e IEC 60512 test 6c IEC 60512 test 2e IEC 60512 test 9a IEC 60512 test 13b IEC 60512 test 16e 09/08 Female Connectors 5 5 -55/125/56 -55/125/56 IEC60664 Male Connectors -55/125 °C 20 °C 70 °C ≤ 4 mΩ ≥ 104 MΩ 50 g 11 ms ≤ 1µs 10 - 2000 Hz 20 g ≤ 1 µs 50 g 11 ms ≤ 1µs ≥ 500 mating cycles ≥ 500 mating cycles ≤ 4 mΩ ≥ 104 MΩ 10 - 2000 Hz 20 g ≤ 1 µs 100 °C per contact 6.6 A 5.0 A 3.4 A shields parallel 10.0 A 7.2 A 4.8 A contact - contact 1.5 mm contact - contact 1.5 mm contact - ground 0.9 mm contact - ground 0.9 mm The permissible operating voltages depend on the customer application and on the applicable or specified safety requirements. Insulation coordination according to IEC 60664-1 has to be regarded for the complete electrical device. Therefore, the maximum creepage and clearance distances of the mated connectors are specified for consideration as a part of the whole current path. In practice, reductions in creepage or clearance distances may occur due to the conductive pattern of the printed board or the wiring used, and have to be taken into account separately. As a result the creepage and clearance distances for the application may be reduced compared to those of the connector. contact - contact 750 Vrms contact - contact 750 Vrms contact - shield 750 Vrms contact - shield 750 Vrms -55/125 °C ≤ 20 N ≥ 0.5 N Edition 1 ≤ 20 N ≥ 0.5 N www.erni.com 5 MicroSpeed® Power Modules Electrical and Mechanical Characteristics Number of Pins Process-conditions Soldering temperature max. Hand soldering temperature max. Dip soldering temperature max. Reflow soldering temperature max. Standard IEC 68-2-20 Coplanarity Housing Materials Plastic material CTI value UL flame rating UL file Contact Materials Base material Mating area Termination area Environment compatibility Recycling JEDEC J-STD-020C IEC 60112 Male Connectors 5 3.5 s at 350 °C 10 s at 260 °C 20 - 40 s at 260 °C < 0.1 mm LCP 175 UL 94 V-0 E83005 Cu alloy Female Connectors 5 3.5 s at 350 °C 10 s at 260 °C 20 - 40 s at 260 °C < 0.1 mm LCP 175 UL 94 V-0 E83005 Cu alloy gold plating no flame-retardent additives, no toxic additives allows easy recycling Sn 6Catalog E 074587 09/08 gold plating Sn Edition 1 www.erni.com MicroSpeed® Power Modules Packaging Verpackt in Gurtverpackung - Tape on Reel Packaging Male Connectors Verpackungseinheit: 420 Stück - Packaging unit: 420 pcs Abspulrichtung - Reel off Direction 4 16 32 a1 100 32,5 330 Verpackt in Gurtverpackung - Tape on Reel Packaging Female Connectors Verpackungseinheit: 420 Stück - Packaging unit: 420 pcs Abspulrichtung - Reel off Direction a1 16 32 4 100 32,5 330 All dimensions in mm. Catalog E 074587 09/08 Edition 1 www.erni.com 7 MicroSpeed® Power Modules Male Connectors • Current carrying capacity up to 10 A for both shields • Current up to 6.6 A (20°) per pin • Partial contact loading is possible • Board-to-Board heights 5-20 mm • Shield contacts available as SMT or THR version Dimensional Drawing Connectors with SMT Ground Pins 5,85 12,15 8,95 4,6 Ansaughaube B A C 1,5 hood 0,6 0,8 0,65 0,5 11 1 mm 2 mm 9 mm 10 mm ohne Angsaughaube 12,15 Steckhöhe Stacking Height without hood a5 2 6,95 4,80 6,30 7,95 5,80 7,30 14,95 12,80 14,30 15,95 13,80 15,30 A B C a1 4x2=8 Leiterplatten-Layout / PCB-Layout 11 3x3=9 3 0,8 0,7 2,6 4,45 0,65 0,9 0,75 0,85 0,8 0,85 2 1,5 4x2=8 All dimensions in mm. 8Catalog E 074587 09/08 Edition 1 www.erni.com MicroSpeed® Power Modules Male Connectors Dimensional Drawing Connectors with THR Ground Pins 12,15 5,85 8,95 Angsaughaube 4,6 1,2 B A C 1,5 hood 0,6 11 Steckhöhe Stacking Height 6,60 5,40 3,80 8,60 7,40 5,80 10,60 9,40 7,80 12,60 11,40 9,80 A B C 0,15 0,65 0,5 4 mm 6 mm 8 mm 10 mm 0,8 ohne Angsaughaube 12,15 without hood 2 a5 a1 4x2=8 Leiterplatten-Layout / PCB-Layout 11 3x3=9 1 3 0,6 ±0,05 0,7 4,5 0,8 2 1,5 1 0,275 1,375 2,6 4,25 0,75 0,9 4x2=8 All dimensions in mm. Catalog E 074587 09/08 Edition 1 www.erni.com 9 MicroSpeed® Power Modules Male Connectors Ordering Information Number Termination of Pins Unmated Stacking Height Packaging 5 SMT 1 mm Tape&Reel/420 pcs 214357 5 SMT/THR 1 mm Tape&Reel/420 pcs 214916 5 SMT 2 mm Tape&Reel/420 pcs 214550 5 SMT/THR 2 mm Tape&Reel/420 pcs 214917 10Catalog E 074587 09/08 Edition 1 Part Number www.erni.com MicroSpeed® Power Modules Male Connectors Ordering Information Number Termination of Pins Unmated Stacking Height Packaging 5 SMT 9 mm Tape&Reel/240 pcs 214551 5 SMT/THR 9 mm Tape&Reel/240 pcs 214918 5 SMT 10 mm Tape&Reel/240 pcs 214552 5 SMT/THR 10 mm Tape&Reel/240 pcs 214919 Catalog E 074587 09/08 Edition 1 www.erni.com Part Number 11 MicroSpeed® Power Modules Female Connectors • Current carrying capacity up to 10 A for both shields • Current up to 6.6 A (20°) per pin • Partial contact loading is possible • Board-to-Board heights 5-20 mm • Shield contacts available as SMT or THR version Dimensional Drawing Connectors with SMT Ground Pins 11,55 5,5 Ansaughaube hood 4,15 C A B 6,5 4 mm 6 mm 8 mm 10 mm 0,6 0,8 0,5 5,40 3,80 8,10 7,40 5,80 10,10 9,40 7,80 12,10 11,40 9,80 B C A 0,7 Steckhöhe Stacking Height 6,10 11,013 3,85 11,55 4x2=8 a1 a5 Leiterplatten-Layout / PCB-Layout 11 3x3=9 0,85 3 0,8 0,9 0,75 2,6 4,45 0,65 0,7 0,8 2 1,5 0,85 4x2=8 All dimensions in mm. 12Catalog E 074587 09/08 Edition 1 www.erni.com MicroSpeed® Power Modules Female Connectors Dimensional Drawing Connectors with THR Ground Pins 11,55 5,5 4,15 Ansaughaube hood 0,7 C A B 6,5 Steckhöhe Stacking Height 0,8 0,5 6,60 5,40 3,80 8,60 7,40 5,80 10,60 9,40 7,80 12,60 11,40 9,80 A B C 0,7 0,6 4 mm 6 mm 8 mm 10 mm 11,013 3,85 11,55 4x2=8 a1 a5 Leiterplatten-Layout / PCB-Layout 11 3x3=9 1 3 0,7 0,6 ±0,05 4,5 0,75 2,6 0,9 0,8 2 1,5 1 4x2=8 All dimensions in mm. Catalog E 074587 09/08 Edition 1 www.erni.com 13 MicroSpeed® Power Modules Female Connectors Ordering Information Number Termination of Pins Unmated Stacking Height Packaging 5 SMT 4 mm Tape&Reel/420 pcs 214356 5 SMT/THR 4 mm Tape&Reel/420 pcs 214912 5 SMT 6 mm Tape&Reel/420 pcs 214547 5 SMT/THR 6 mm Tape&Reel/420 pcs 214913 14Catalog E 074587 09/08 Edition 1 Part Number www.erni.com MicroSpeed® Power Modules Female Connectors Ordering Information Number Termination of Pins Unmated Stacking Height Packaging 5 SMT 8 mm Tape&Reel/300 pcs 214548 5 SMT/THR 8 mm Tape&Reel/300 pcs 214914 5 SMT 10 mm Tape&Reel/300 pcs 214549 5 SMT/THR 10 mm Tape&Reel/300 pcs 214915 Catalog E 074587 09/08 Edition 1 www.erni.com Part Number 15 MicroSpeed® Power Modules Part Number Index Part Number Page 214356 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 214357 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 214547 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 214548 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 214549 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 214550 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 214551 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 214552 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 214912 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 214913 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 214914 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 214915 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 214916 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 214917 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 214918 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 214919 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 16Catalog E 074587 09/08 Edition 1 www.erni.com Member www.erni.com Catalog Katalog D E 074587 074518 Ausgabe 09/08 3, 03/05 www.erni.com Edition 1 17 ERNI Electronics GmbH & Co. KG Seestrasse 9 73099 Adelberg/Germany Tel +49 7166 50-0 Fax +49 7166 50-282 [email protected] Europe ERNI Electronics, Inc. 2201 Westwood Ave Richmond, VA 23230/USA Tel +1 804 228-4100 Fax +1 804 228-4099 [email protected] North America ERNI Asia Holding Pte Ltd. Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore 569625 Tel +65 6 555 5885 Fax +65 6 555 5995 [email protected] Asia South America Australia Africa Japan Canada Mexico New Zealand www.erni.com © ERNI Electronics GmbH & Co. KG 2008 • Printed in Germany. A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. ERNI ®, MicroStac ®, MicroSpeed ®, MiniBridge ®, MaxiBridge ®, ERmet ®, ERmet ZD ®, ERbic ® and ERNIPRESS ® are trademarks (registered or applied for in various countries) of ERNI Electronics GmbH & Co. KG. 18 Katalog D Catalog E 074587 074518 Ausgabe 09/08 3, 03/05 www.erni.com Edition 1