VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 FTDI Chip VM800BU Datasheet Embedded Video Engine Basic USB module General Purpose Multi Media Controller 1 Introduction The VM800BU is a USB controlled development module for FTDI’s FT800, which is used to develop and demonstrate the functionality of the FT800 Embedded Video Engine, EVE. This module interfaces with a system controller via a USB port, accessing an onboard FT232H bridge chip to connect to the FT800 SPI port. VM800BU modules support 3 different LCD panel size options and are designed for industrial or commercial environments with precision fitted bezels in either black (-BK) or pearl (-PL). VM800BU35A-xx is the 3.5” LCD VM800BU43A-xx is the 4.3” LCD VM800BU50A-xx is the 5.0” LCD 1.1 Features The VM800BU utilises the FTDI FT800 Embedded Video Engine, EVE. Graphic, audio and touch features of the FT800 chip can be accessed with the VM800BU. For a full list of the FT800’s features please see the FT800 datasheet. The VM800BU has the following features: Integrated QVGA resolution (3.5”) or WQVGA resolution (4.3”/5.0”) LCD display Integrated resistive touch screen LCD panel On board LCD backlight LED Driver On board audio power amplifier and micro speaker FT232H USB interface controller Flexible 5V power supply. Powering the VM800BU using either a 2.1mm power jack or USB Micro-B port Precision fitted bezel in black(-BK) or pearl (-PL) Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 2 Clearance No.: FTDI#404 Ordering Information Part No. Description VM800BU35A-BK VM800BU module, 3.5 inch TFT LCD display panel preinstalled, black bezel VM800BU43A-BK VM800BU module, 4.3 inch TFT LCD display panel preinstalled, black bezel VM800BU50A-BK VM800BU module, 5.0 inch TFT LCD display panel preinstalled, black bezel VM800BU35A-PL VM800BU module, 3.5 inch TFT LCD display panel preinstalled, pearl bezel VM800BU43A-PL VM800BU module, 4.3 inch TFT LCD display panel preinstalled, pearl bezel VM800BU50A-PL VM800BU module, 5.0 inch TFT LCD display panel preinstalled, pearl bezel VA-FC-1M-BKW Accessory - Flat USB A to Micro B Cable 1M- Black and White VA-FC-1M-BLW Accessory - Flat USB A to Micro B Cable 1M- Blue and White VA-FC-STYLUS1 Accessory - Resistive Touch Screen Pen Stylus Table 2-1 – Ordering information Note: 3.5” display resolution is 320 x 240 (QVGA). 4.3”/5.0” display resolution is 480 x 272 (WQVGA) 2 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 Table of Contents 1 Introduction ................................................................................... 1 1.1 Features ........................................................................................................ 1 2 Ordering Information ..................................................................... 2 3 Hardware Description ..................................................................... 4 3.1 VM800BU module .......................................................................................... 4 3.2 Physical Descriptions .................................................................................... 5 3.2.1 PCB layout ................................................................................................ 5 3.2.2 VM800BU Connectors ................................................................................. 6 4 Board Schematics ........................................................................... 8 5 Hardware Setup Guide .................................................................. 11 6 7 5.1 Power Configuration ................................................................................... 11 5.2 MPSSE Setup ............................................................................................... 11 Assembling the Bezel and Panel Mounting ................................... 13 6.1 3.5” Dimensions .......................................................................................... 14 6.2 4.3” Dimensions .......................................................................................... 15 6.3 5.0” Dimensions .......................................................................................... 16 Specifications ............................................................................... 17 7.1 8 Optical Specification ................................................................................... 17 Contact Information ..................................................................... 20 Appendix A - References ....................................................................................... 20 Appendix B - List of Figures and Tables ................................................................. 21 Appendix C – Revision History ............................................................................... 22 3 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 3 Clearance No.: FTDI#404 Hardware Description Please refer to section 3.2.2 for connector settings. Some VM800BU jumpers must be set to work properly with your system. 3.1 VM800BU module Figure 3-1 - VM800BU module profile 3.5” display version Figure 3-2 - VM800BU module profile 4.3” display version Figure 3-3 - VM800BU module profile 5” display version NOTE: Also available in pearl. The VM800BU module is intended for direct use into existing applications that require a display. This module is suitable for interfacing with a system that has a USB Host port. 4 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 The VM800BU module is available in multiple options: 3.5, 4.3 or 5.0 inch display options. The main functions of the VM800BU are as follows: Micro USB connector 2-pin connector for power supply 3.3V regulator: Takes 5V input and outputs 3.3V for on-board circuits LCD touch screen panel 3 stage audio filter and power amplifier 8Ω speaker Audio line out option FT232H enabled USB to SPI Bridge Precision fitted bezel 3.2 Physical Descriptions 3.2.1 PCB layout The VM800BU module PCB layouts are illustrated in Figure 3-4 and Figure 3-5. Boards are four-layer, approximately 1.6 mm thickness. Figure 3-4 - VM800BU module PCB view, 3.5” display version 5 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 Figure 3-5 - VM800BU module PCB view, 4.3” and 5” display version 3.2.2 VM800BU Connectors Connectors and jumpers are described in the following sections. CN1- Micro USB Receptacle This receptacle is for 5V input to power the board. This also has USB functionality. Pin No. Name Type 1 VBUS P 5V power supply 2 DM IO Connected to FT232HQ 3 DP IO Connected to FT232HQ 4 NC NA No connection 5 GND Table 3-1 – CN1 Pinout P Description Ground CN2- 2-pin power connector 2 pin connector for 5V/3.3V power input to the board. Alternative to Micro USB connector. Pin No. Name Type Description 1 VCC P 5V or 3.3V DC power supply 2 GND Table 3-2 – CN2 Pinout P Ground 6 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 J2 - Selection between Lineout and loop back into the power amplifier. Selection between audio lineout and loop back into the power amplifier. Jumper position Description Short pin 1-2 Table 3-3 – J2 Pin Options Audio amp enabled (default) JP1- Audio Amplifier Power Select This jumper provides the option to select the power supply voltage for the on-board power amplifier. Jumper position Description Short pin 1-2 3.3V selected (default) Short pin 2-3 Table 3-4 – JP1 Pin options 5V selected *This needs to be configured before audio can be heard. Default is 3.3V. Select 5V to increase the maximum volume for the speaker. JP2 – On board amplifier enable Solder connection not fitted by default. JP3 - On board amplifier mute Solder connection not fitted by default. Do not use. JP4 – VBUS ON Jumper fitted by default. SW1 – Power source select Jumper position Description Short pin 1-2 Board power from CN1 (default) Short pin 2-3 Table 3-5 – SW1 jumper options Board power from CN2 7 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 4 Clearance No.: FTDI#404 Board Schematics Figure 4-1 - VM800BU35A LCD Interface (3.5” Version) 8 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 Figure 4-2 - VM800BU43A/VM800BU50A LCD Interface (4.3”/5.0” Version) 9 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 Figure 4-3 – VM800BU SPI Interface and Power Input Figure 4-4 – VM800BU Audio Circuits 10 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 5 Clearance No.: FTDI#404 Hardware Setup Guide 5.1 Power Configuration There are 2 methods of powering the VM800BU board. 1) USB Power(5V) - Connect USB power through micro-USB cable to CN1 2) DC IN(5V) - Connect 5V to CN2 The following table summarise how to power the VM800BU board using the various methods. Power Method CN1 CN2 SW1 USB Power 5V N/C Short pin 1-2 DC IN(5V) N/C 5V Short pin 2-3 Table 5-1 - Board power configuration 5.2 MPSSE Setup To provide a quick start with the VM800BU development board, Windows based sample projects including source code are provided for users to get a touch and feel experience with the VM800BU. An overview of the process is provided in the following paragraphs with more details in AN_245_VM800CB_SampleAPP_PC_Introduction. MPSSE is a “multi purpose synchronous serial engine” interface available in some FTDI devices (e.g. FT2232D, FT232H, FT2232H and FT4232H). This engine allows users to bridge from a USB port to an I2C or SPI interface. Sample code is available for driving the FT800 over this interface with a FT232H device. 11 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 Figure 5-1 – VM800BU Connects to PC through USB. Hardware Setup Connect a USB cable (suggest FTDI accessory VA-FC-1M-BKW or VA-FC-1M-BLW) from the VM800BU USB port to the PC USB host port or self-powered hub port. The PC or hub will supply power to the VM800BU. Software Setup Launch the demo application based on MPSSE from the PC. The demo application notes can be found at following link: AN_245_VM800CB_SampleAPP_PC_Introduction The demo application examples can be downloaded at following link: http://www.ftdichip.com/Support/SoftwareExamples/FT800_Projects.htm 12 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 6 Clearance No.: FTDI#404 Assembling the Bezel and Panel Mounting Figure 6-1 - VM800BU Panel Mount (Front view) Figure 6-2 - VM800BU Panel Mount (Rear view) 13 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 6.1 3.5” Dimensions Figure 6-3 - VM800BU 3.5” panel mount dimensions 14 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 6.2 4.3” Dimensions Figure 6-4 - VM800BU 4.3” panel mount dimensions 15 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 6.3 5.0” Dimensions Figure 6-5 - VM800BU 5.0” panel mount dimensions 16 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 7 Clearance No.: FTDI#404 Specifications 7.1 Optical Specification Table 7-1 - 3.5” TFT Optical specification 17 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 Table 7-2 - 4.3” TFT Optical Specification 18 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 Table 7-3 - 5” TFT Optical Specification 19 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 8 Clearance No.: FTDI#404 Contact Information Head Office – Glasgow, UK Branch Office – Tigard, Oregon, USA Unit 1, 2 Seaward Place, Centurion Business Park Glasgow G41 1HH United Kingdom Tel: +44 (0) 141 429 2777 Fax: +44 (0) 141 429 2758 7130 SW Fir Loop Tigard, OR 97223 USA Tel: +1 (503) 547 0988 Fax: +1 (503) 547 0987 E-mail (Sales) E-mail (Support) E-mail (General Enquiries) E-Mail (Sales) E-Mail (Support) E-Mail (General Enquiries) [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Branch Office – Taipei, Taiwan Branch Office – Shanghai, China 2F, No. 516, Sec. 1, NeiHu Road Taipei 114 Taiwan , R.O.C. Tel: +886 (2) 8797 1330 Fax: +886 (2) 8751 9737 Room 1103, No. 666 West Huaihai Road, Shanghai, 200052 China Tel: +86 (21) 6235 1596 Fax: +86 (21) 6235 1595 E-mail (Sales) E-mail (Support) E-mail (General Enquiries) E-mail (Sales) E-mail (Support) E-mail (General Enquiries) [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Web Site http://ftdichip.com Distributor and Sales Representatives Please visit the Sales Network page of the FTDI Web site for the contact details of our distributor(s) and sales representative(s) in your country. System and equipment manufacturers and designers are responsible to ensure that their systems, and any Future Technology Devices International Ltd (FTDI) devices incorporated in their systems, meet all applicable safety, regulatory and system-level performance requirements. All application-related information in this document (including application descriptions, suggested FTDI devices and other materials) is provided for reference only. While FTDI has taken care to assure it is accurate, this information is subject to customer confirmation, and FTDI disclaims all liability for system designs and for any applications assistance provided by FTDI. Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify a nd hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. This document is subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor any part of the information contained in, or the product described in this document, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. Future Technology Devices International Ltd, Un it 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH, United Kingdom. Scotland Registered Company Number: SC136640 20 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 Appendix A - References FT800 datasheet: DS_FT800_Embedded_Video_Engine FT800 software programming guide: FT800_Programmer_Guide FT800 sample application notes: AN_245_VM800CB_SampleAPP_PC_Introduction FT800 Software examples: http://www.ftdichip.com/Support/SoftwareExamples/FT800_Projects.htm D2xx Programmers Guide: http://www.ftdichip.com/Support/Documents/ProgramGuides/D2XX_Programmer's_Guide(FT_000071).p df AN_108: Command Processor for MPSSE and MCU Host Bus Emulation Modes http://www.ftdichip.com/Support/Documents/AppNotes/AN_108_Command_Processor_for_MPSSE_and_ MCU_Host_Bus_Emulation_Modes.pdf User Guide for libMPSSE – SPI http://www.ftdichip.com/Support/Documents/AppNotes/AN_178_User_Guide_For_LibMPSSE-SPI.pdf 20 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 Appendix B - List of Figures and Tables List of Figures Figure 3-1 - VM800BU module profile 3.5” display version ......................................... 4 Figure 3-2 - VM800BU module profile 4.3” display version ......................................... 4 Figure 3-3 - VM800BU module profile 5” display version ............................................ 4 Figure 3-4 - VM800BU module PCB view, 3.5” display version ................................... 5 Figure 3-5 - VM800BU module PCB view, 4.3” and 5” display version ........................ 6 Figure 4-1 - VM800BU35A LCD Interface (3.5” Version) ............................................ 8 Figure 4-2 - VM800BU43A/VM800BU50A LCD Interface (4.3”/5.0” Version) ............. 9 Figure 4-3 – VM800BU SPI Interface and Power Input ............................................. 10 Figure 4-4 – VM800BU Audio Circuits ....................................................................... 10 Figure 5-1 – VM800BU Connects to PC through USB. ................................................ 12 Figure 6-1 - VM800BU Panel Mount (Front view) ..................................................... 13 Figure 6-2 - VM800BU Panel Mount (Rear view) ....................................................... 13 Figure 6-3 - VM800BU 3.5” panel mount dimensions ................................................ 14 Figure 6-4 - VM800BU 4.3” panel mount dimensions ................................................ 15 Figure 6-5 - VM800BU 5.0” panel mount dimensions................................................ 16 List of Tables Table 2-1 – Ordering information ............................................................................... 2 Table 3-1 – CN1 Pinout ............................................................................................... 6 Table 3-2 – CN2 Pinout ............................................................................................... 6 Table 3-3 – J2 Pin Options .......................................................................................... 7 Table 3-4 – JP1 Pin options ........................................................................................ 7 Table 3-5 – SW1 jumper options ................................................................................ 7 Table 5-1 - Board power configuration ..................................................................... 11 Table 7-1 - 3.5” TFT Optical specification ................................................................. 17 Table 7-2 - 4.3” TFT Optical Specification ................................................................. 18 Table 7-3 - 5” TFT Optical Specification .................................................................... 19 21 Copyright © 2014 Future Technology Devices International Limited VM800BU Datasheet Version 1.0 Document Reference No.: FT_001026 Clearance No.: FTDI#404 Appendix C – Revision History Document Title: DS_VM800BU EVE Document Reference No.: FT_001026 Clearance No.: FTDI#404 Product Page: http://www.ftdichip.com/eve.htm Document Feedback: Send Feedback Version 1.0 Initial Datasheet released 29/07/14 22 Copyright © 2014 Future Technology Devices International Limited