Based LEDs for Transit Model Boards Based LE Ds SELECTOR GUIDE With the technological advancements in Light Emitting Diodes (LEDs) brightness can now rival the incandescent lamp when used in similar packages. These advancements have allowed for a new type of product called the Based LED - an LED with the fit and functionality of an incandescent light bulb. Dialight's line of based LEDs were designed with flexibility and efficiency in mind. S Longer life - up to 100,000 hrs S Energy savings - 90% less power required S High reliability - vibration and shock resistant S Multi-chip, Cluster, and Single Ultra-Bright Chip S AlInGaP and InGaN die technology S Polarized and non-polarized S Single and multi-voltage input SAMPLING OF PRODUCT BASE STYLE 6 12/14* 24/28* 120 CONFIG. RED GREEN YELLOW BLUE WHITE VDC VDC VDC VAC T 1 3/4 Bi-Pin Single Chip D D D D D D D D T2 Telephone Slide Single Chip D D D D D T 3 1/4 Miniature Screw (E10) Single Chip D D D D D D T 3 1/4 Miniature Bayonet (BA9S) Single Chip D D D D D D NONPOLARIZED POLARIZED 6-36 AC/DC D D D D D D D D D D D D LED Configuration: Single Chip - The single chip design consists of a single ultra-bright LED of the latest LED technology, AlInGaP or InGaN, which is mounted onto an incandescent base. Even though there is only one LED, this high intensity product can provide equivalent light output of the bulb it replaces. This design has a slightly narrower viewing angle than either the multi-chip or cluster, yet is one of the most cost-effective designs available. Polarity LEDs are diodes which allow current to flow in only one direction.If you are unfamiliar with the polarity of your circuit, a rectifying circuit must be used. Dialight's non-polarized based LEDs incorporate a full wave rectifier and all the necessary components to allow proper operation in any circuit providing the correct voltage is used. Maximizing Light Output In order to maximize the light output from a based LED, it is important to match the color of the lens cap to the emitting color of the LED. Unlike the incandescent lamp that emits light over the full spectrum, LEDs are monochromatic (emit one color). Since a lens cap is a filter, if not matched properly the overall light output may be substantially reduced. Dialight reserves the right to make changes at any time in order to supply the best product possible. MBELTMBX001_A 586 Series Single Chip BASED LED T 1 3/4 BI-PIN SPECIFICATIONS .612 ±.032 [ 15,55 ±0,81 ] .413 REF. [10,49] .150 ±.012 [ 3,81 ±0,3 ] .250 ±.020 [ 6,35 ±0,5 ] CATHODE (-) .122 ±.008 [ 3,1 ±0,2 ] .120 ±.015 [ 3,05 ±0,38 SEE NOTE 5 ANODE (+) .224 ±.005 [ 5,69 ±0,12 VOLT. ] S Operating Voltages: 6, 14, and 28 VDC S Operating temperature: -30oC to +80oC Storage temperature: -40oC to +85oC S A sampling of bulbs that can be replaced: 2314, 2323, 2324, 2325, 2335, 2337, 2342, 7327, 7328, 7330, 7349, 7377, 7380, 7381, 7382, 7387, 7876, and 7945* S ] * 3mm LED Measurements are typical Dimensions are inches [mm] Part Number 586-1301-101 586-1302-101 586-1303-101 586-1305-101 586-1306-101 586-1301-103 586-1302-103 586-1303-103 586-1305-103 586-1306-103 586-1301-105 586-1302-105 586-1303-105 586-1305-105 586-1306-105 Color Red Green Yellow Blue White Red Green Yellow Blue White Red Green Yellow Blue White May replace other incandescent lamps. See Dialight’s Incandescent Lamp/Based LED cross reference document for complete listing. Peak Wavelength nm Nominal Voltage Forward Current (TYP. - mA) Intensity (TYP. - mcd) 626 525 590 470 * 626 525 590 470 * 626 525 590 470 * 6 6 6 6 6 14 14 14 14 14 28 28 28 28 28 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 90 1700 110 500 635 90 1700 110 500 635 90 1700 110 500 635 * Color coordinates: x = .320, y = .320 Dialight reserves the right to make changes at any time in order to supply the best product possible. MBELTMBX001_A 586 Series Single Chip BASED LED T2 TELEPHONE SLIDE (ANSI #1) SPECIFICATIONS [42.67] 42.67 1.68 [1.68] 5.00 [.197] [5.00] .197 Measurements are typical S Operating voltage: 24 VDC S Non-polarized* S Operating temperature: -30oC to +85oC S Storage temperature: -40oC to +100oC S Replaces incandescent lamps: ANSI #1 and #8 ** Contact factory for ANSI #2 and #3 Dimensions are inches [mm] * If the socket’s polarity is unknown, Dialight recommends using a non-polarized lamp. ** May replace other incandescent lamps. Peak Wavelength nm Forward Current (TYP. - mA) Intensity (TYP. - mcd) 24 25 600 525 24 25 5000 Yellow 592 24 25 1700 586-3505-204 Blue 470 24 25 1500 586-3506-204 White * 24 25 5600 Part Number Color 586-3501-204 Red 622 586-3502-204 Green 586-3503-204 Nominal Voltage * Color Coordinates: x = 0.290, y = 0.305 Dialight reserves the right to make changes at any time in order to supply the best product possible. MBELTMBX001_A 586 Series Single Chip BASED LED T 3 1/4 MINIATURE BAYONET (BA9S) POLARIZED Part Number Color 586-2401-101 586-2402-101 586-2403-101 586-2405-101 586-2406-101 586-2401-103 586-2402-103 586-2403-103 586-2405-103 586-2406-103 586-2401-105 586-2402-105 586-2403-105 586-2405-105 586-2406-105 Red Green Yellow Blue White Red Green Yellow Blue White Red Green Yellow Blue White Peak Forward Can be used in Wavelength Nominal Current Intensity place of Multi-Chip (nm) Voltage (TYP .- mA) (TYP. - mcd) Part Number 630 525 592 470 * 630 525 592 470 * 630 525 592 470 * 6 6 6 6 6 14 14 14 14 14 28 28 28 28 28 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 1050 1650 1275 487 825 1050 1650 1275 487 825 1050 1650 1275 487 825 585-4111 585-4311 585-4411 585-4113 585-4313 585-4413 585-4115 585-4315 585-4415 - SPECIFICATIONS Tinted Color Lens Measurements are typical *Color Coordinates: x = 0.330, y = 0.365 Dimensions are inches [mm] NON-POLARIZED Part Number Color 586-2401-201 586-2402-201 586-2403-201 586-2405-201 586-2406-201 586-2401-203 586-2402-203 586-2403-203 586-2405-203 586-2406-203 586-2401-205 586-2402-205 586-2403-205 586-2405-205 586-2406-205 Red Green Yellow Blue White Red Green Yellow Blue White Red Green Yellow Blue White Peak Forward Can be used in Wavelength Nominal Current Intensity place of Multi-Chip (nm) Voltage (TYP .- mA) (TYP. - mcd) Part Number 630 525 592 470 * 630 525 592 470 * 630 525 592 470 * 6 6 6 6 6 14 14 14 14 14 28 28 28 28 28 15 15 15 15 15 15 15 15 15 15 7.5 7.5 7.5 7.5 7.5 1050 1650 1275 487 825 1050 1650 1275 487 825 525 825 637 243 412 585-4121 585-4321 585-4421 585-4123 585-4323 585-4423 585-4125 585-4325 585-4425 - S Operating Voltages: 6, 14, and 28 VDC S Polarized and non-polarized available* S Operating temperature: -30oC to +85oC Storage temperature: -40oC to +100oC S A sampling of bulbs that can be replaced: 44, 47, 313, 755,1815, 1819, 1847, 1850, 1866, 1889, 1891, 1892, 1893 and 1895** S * If the socket’s polarity is unknown, Dialight recommends using a non-polarized lamp. ** May replace other incandescent lamps. See Dialight’s Incandescent Lamp/Based LED cross reference document for complete listing. *Color Coordinates: x = 0.330, y = 0.365 Dialight reserves the right to make changes at any time in order to supply the best product possible. MBELTMBX001_A 586 Series Single Chip BASED LED T 3 1/4 MINIATURE SCREW (E10) SPECIFICATIONS S Operating voltages: 6, 14, and 28 VDC S Non-polarized* S Operating temperature: -30oC to +85oC Storage temperature: -40oC to +100oC S A sampling of bulbs that can be replaced: 40, 46, 1481, 1487, 1821** S * If the socket’s polarity is unknown, Dialight recommends using a non-polarized lamp. ** May replace other incandescent lamps. Measurements are typical Dimensions are inches [mm] Part Number Color 586-2701-201 586-2702-201 586-2703-201 586-2705-201 586-2706-201 586-2701-201 586-2702-203 586-2703-203 586-2705-203 586-2706-203 586-2701-205 586-2702-205 586-2703-205 586-2705-205 586-2706-205 Red Green Yellow Blue White Red Green Yellow Blue White Red Green Yellow Blue White See Dialight’s Incandescent Lamp/Based LED cross reference document for complete listing. Peak Wavelength nm Nominal Voltage Forward Current (TYP. - mA) 630 525 592 470 * 630 525 592 470 * 630 525 592 470 * 6 6 6 6 6 14 14 14 14 14 28 28 28 28 28 15 15 15 15 15 15 15 15 15 15 7.5 7.5 7.5 7.5 7.5 Intensity (TYP. - mcd) * Color coordinates: x = .320, y = .320 Dialight reserves the right to make changes at any time in order to supply the best product possible. MBELTMBX001_A 1050 1650 1275 487 825 1050 1650 1275 487 825 525 825 637 243 412 UNDERSTANDING BASED LEDS COST COMPARISON BETWEEN LED AND INCANDESCENT BULBS A COMPARISON BETWEEN LED AND INCANDESCENT 20 INCANDESCENT Generate heat to produce light Typical 100K hours of life Typical 2K hours of operation Semiconductor based light Light source being burned away Constant current Subject to inrush current Epoxy encapsulation is rugged under exposure to shock and vibration Susceptible to catastrophic failures 15 * Light produced through luminescence Up to 90% less power required Uses high power Responds 0.2 seconds faster Slow response Low maintenance Frequent maintenance COST IN DOLLARS LED 10 5 0 500 1500 1000 HOURS IN USE Based LED 2000 2500 Incandescent Bulbs *Cost includes -replacement of bulb, labor, and energy savings PRODUCT FAMILY With the technological advancements in Light Emitting Diodes (LEDs) brightness can now rival the incandescent lamp when used in similar packages. These advancements have created a new type of product called the based LED - an LED with the functionality of an incandescent bulb. The following styles are currently available in red, green, yellow, blue and white: S T 1 3/4 Midget Flange S T 1 3/4 Bi-Pin S T 1 3/4 Wedge (T5) S T 2 Telephone Slide S T 3 1/4 Miniature Bayonet (BA9S) S T 3 1/4 Miniature Screw (E10) S T 3 1/4 Wedge (T10) S 15mm SC Bayonet (BA15S) Dialight’s line of based LEDs continues to grow. Please visit our website for more information. www.dialight.com MBELTMBX001_A LED Indicators For Railroad Applications Based on the demand from rail car manufacturers and transit authorities, Dialight now offers a collection of products specifically designed to accomodate the needs of the railroad industry. All of these products utilize the latest LED technology, are highly durable, and are direct replacements for incandescent lighting. 556 Series LED Panel Mount Indicators This series has been expanded to include 37.5 VDC, 74 VDC, and 125 VDC, providing for a smooth transition from incandescent to LED technology. These are our most popular LED indicators, and are used in a variety of applications. 556 Series Exterior Door Indicators The 556 Series LEDs have been repackaged in aluminum housings, for use as Exterior Door Indicators. These highly durable units are available with one, two, or three indicators, in any combination of colors. The units are fully customizable to your application. 5 1/2 Inch LED Marker Light Dialight is currently engineering a rear LED Marker Light. Like our other indicators, this product will offer a long life and energy savings in a durable package. Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 USA Tel: 1-732-919-3119 • Fax: 1-732-751-5778 www.dialight.com A Roxboro Group Company MBELTMBX001_A