REV REVISIONS DRN CKD APP NEW RELEASE B UPDATED TOLERANCES; REVERSE CURRENT 100 WAS 20; INTENSITY ANGLE 116; ADDED METRIC UNITS. .380 [9,65] .150 #.015 [3,81 #,38] .190 [4,82] ECN NO A CE RED .280 [7,11] AE AJF KLJ DATE NO 1-26-07 NO 7-23-09 GREEN .122 [3,09] .150 [3,81] F .070 [1,78] PIN 1 .030 [0,76] .020 SQ NOM [0,5] TYP. 2 *.100±.010 [2,54 #,25] TYP (3) PLACES 3 ANODE (RED) .066-.069 [1,68-1,75] ANODE (GREEN) *.075 [1,91] .080 [2,03] *.075 [1,91] OPERATING CHARACTERISTICS AT 25 LED CHARACTERISTICS MIN LUMINOUS INTENSITY $C AMBIENT TYP. 2 MAX. TEST CONDITIONS mcd IF = 20 mA 2.5 V IF = 20 mA 100 µA VR = 4V nm IF = 20 mA DEGREES IF = 20 mA 4 2.0 2.1 FORWARD VOLTAGE REVERSE CURRENT 630 560 PEAK WAVELENGHT 2 X 1/2- INTENSITY ANGLE ABSOLUTE MAXIUM RATINGS AT 25 UNITS 116 75 mW DERATE LINEARLY FROM 25 $C .33 mA/$C CONTINUOUS FORWARD CURRENT 30 mA PEAK FORWRD CURRENT (D<1/20,t<1ms) PEAK REVERSE VOLTAGE LEAD SOLDERING TEMPERATURE, 5 SEC., 1/16" FROM BASE OPERATING TEMPERATURE STORAGE TEMPERATURE CATHODE (COMMON) *.100 [2,54] RoHS Compliant 551-3508F Part Numbers with the "F" suffix ending are RoHS Compliant. Packaging is marked with "RoHS Compliant" label or equivalent markings. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. .043 ±.002 [1,09 #,05] .063 ±.002 [1,6 #,05] NOTES: .075 ±.002 [1,91 #,05] $C AMBIENT POWER DISSIPATION 3 GREEN ANODE 2 COMMON CATHODE 1 RED ANODE .100 ±.002 [2,54 #,05] .075 ±.002 [1,91 #,05] 1. LEADS TO FIT INTO HOLES SPACED AS PER PATTERN. 2. BODY OF LED TO SNAP INTO HOUSING. RETENTION FORCE (F) APPLIED AS SHOWN TO BE 1.5 POUND MIN.. 3. "*" DENOTES CRITICAL DIMENSIONS. 4. DIALIGHT PART NUMBER: 551-3508F 5. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY, HANDLING AND STORAGE IN ACCORDANCE WITH 1PC-A-610. THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. RECOMMENDED PC BOARD HOLE PATTERN 100 mA 4 V SCALE: DRAWING SCALE 260$C ALL DIM'S IN: INCHES (MM) -30$ C to +85$C TOLERANCES: UNLESS OTHERWISE SPECIFIED -30$ C to +100$C ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES FRACTIONS: #1/64 DECIMALS (.XX): #.02 DECIMALS (.XXX): #.010 DECIMALS (.XXXX): #.0005 ANGLES: #1 $ REV DRAWING NUMBER C-17452 TITLE B 3mm BI-COLOR CBI 3 LEADED R/G RoHS COMPLIANT MATERIAL FINISH: 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 FSCM 83330 SHEET 1 OF 1 FAMILY TABLE: