REV. ECN NO. REVISIONS A LED CHIP .059 #.004 [1,5 #0,1 ] 2 CATHODE MARK .118 [3] .035 [0,89] TIME - SECONDS 1 1 TC D.C. N.O. 6-9-99 ADDED NOTES 6 AND 7. C ADDED "F" SUFFIX RoHS COMPLIANT P/Ns -402F, -407F, WITH RoHS REFLOW PROFILE D ADDED DOMINANT WAVELENGTH SPECS, TOLERANCES, TAPE AND REEL SPEC, LED SCHEMATIC AND NOTE 8. LED CHARACTERISTICS MIN. TYP. LUMINOUS INTENSITY 5.0 PEAK WAVELENGTH .173 #.002 [4,4 #0,05] .024 [0,61] DOMINANT WAVELENGTH .063 #.002 [1,6 #0,05 ] 2 597 MAX. TWC AJF KLJ NO 10-11-10 UNITS TEST CONDITIONS 9.0 mcd IF = 20 mA 605 nm 606 612 FORWARD VOLTAGE 2.2 2.5 2 X 1/2 - INTENSITY ANGLE 70 nm V IF = 20 mA DEGREE ABSOLUTE MAXIMUM RATINGS AT 25 C $ AMBIENT .051 [1,3] VALUE UNITS 75 mW POWER DISSIPATION .063 #.002 [1,6 #0,05 ] PEAK FORWARD CURRENT 70 mA CONTINUOUS FORWARD CURRENT 30 mA 0.42 mA/ $C LINEAR DERATING FROM 25 C $ RECOMMENDED SOLDER PAD LAYOUT PEAK REVERSE VOLTAGE (I SEE NOTE 2 PIN 2 4-22-94 OPERATING CHARACTERISTICS AT 25 C $ AMBIENT 2 .063 [1,6] DATE HG RoHS COMPLIANT 597-3201-40XF Part Numbers with the "F" suffix ending are RoHS Compliant. For example: 597-3201-402F Reel and bag packaging are marked with "RoHS Compliant" label or equivalent markings. These parts can be used with RoHS reflow profile. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. .079 [2,01] .071 [1,8] MC B LENS 1 DRN. CKD. APP. NEW RELEASE PIN 1 CATHODE A) 4 V REFLOW SOLDERING PRE-HEAT 120 C $ TO 150 C $, 60-120 SEC. (FOR 5 SEC.) 260 $C WAVE SOLDERING (FOR 5 SEC.) 260 $C SOLDER DIP (FOR 5 SEC.) 260 $C -30 TO +85 $C -40 TO +100 $C STORAGE TEMPERATURE .157 #.004 [4 #0,1 ] .069 #.004 [1,75 #0,1 ] CATHODE .071 [1,8] NOTES: .315 #.008 [8 #0,2 ] [ .138 #.002 [3,5 #0,05 ] .132 [3,35] 6. DEVICES POSITIONED ON REEL WITH CATHODE SIDE TOWARDS SPROCKET. 7. TAPE AND REEL LEDS MAY REQUIRE RE-TAPING AFTER 12 MONTHS. 8. PIN NUMBERS ARE FOR REFERENCE ONLY, DESIGNATION NON-EXISITENT ON PART. ] THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. SCALE: 10.000 4. SUFFIX -402F FOR 20 PCS ON A SAMPLE STRIP. 5. SUFFIX -407F FOR 7" DIA. REEL, .315" [8mm] WIDE TAPE, PACKAGED 2,500 PCS PER REEL. +.004 -.000 +0,1 1,5 -0,0 .059 1. DIE: GaAsP/GaP ORANGE. 3. DIALIGHT PART NUMBERS: 597-3201-40XF. = 100 OPERATING TEMPERATURE LED SCHEMATIC 2. SOLDER PADS: COPPER BASE, GOLD PLATED. R .079 #.002 [2 #0,05 ] .043 [1,1 ] CENTER HOLE SCALE 4.000 .157 #.004 [4 #0,1 ] TAPE AND REEL SPECIFICATION C-16213 TOLERANCES: UNLESS OTHERWISE SPECIFIED FRACTIONS: #1/64 DECIMALS (.XX): #.02 DECIMALS (.XXX): #.008 REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) TITLE D ORANGE SURFACE MOUNT LED MATERIAL ANGLES: #1 $ FINISH: 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 FSCM 83330 SHEET 1 OF 1 FAMILY TABLE: