ROHM RF101A2S

RF101A2S
Diodes
Fast recovery diode
RF101A2S
zApplications
General rectification
zDimensions (Unit : mm)
CATHODE BAND (BLUE)
φ0.6±0.1
①
②
7
zFeatures
1) Cylindrical mold type. (MSR)
2) Ultra Low VF.
3) Ultra high switching.
4) Low switching loss.
5) High ESD.
3.0±0.2
29±1
29±1
φ2.5±0.2
ROHM : MSR
①
②
Manufacture Date
zTaping specifications (Unit : mm)
zConstruction
Silicon epitaxial planar
IVORY
H2
BLUE
A
H2
記号
Mark
E
B
C
Stabdard dimension
寸法規格値(mm)
value (mm)
T-31 52.4±1.5
A
T-32 26.0+0.4
-0
B
5.0±0.5
C
0.5MAX
D
0
E
50.4±0.4
F
0.3MAX
H1
6.0±0.5
H2
5.0±0.5
L1-L2
0.6MAX
*H1(6mm):BROWN
L2
L1
F
H1
H1
D
cf : cumulative pitch tolerance w ith 20 pitch than ±1.5mm
注) 累積ピッチの許容差は20ピッチで±1.5mm以下とする
zAbsolute maximum ratings (Ta=25°C)
Parameter
Reverse voltage (repetitive)
Reverse voltage (DC)
Average rectified forward current(*1)
Forward current surge peak (60Hz・1cyc)
Junction temperature
Storage temperature
Limits
200
200
1
20
150
-55 to +150
Symbol
VRM
VR
Io
IFSM
Tj
Tstg
(*1)Mounting on epoxi board. 180°Half sine wave
zElectrical characteristic (Ta=25°C)
Parameter
Symbol
VF
Forward voltage
IR
Reverse current
Reverse recovery time
trr
Min.
-
Typ.
0.815
0.01
12
Max.
0.87
10
25
Unit
V
µA
ns
Unit
V
V
A
A
℃
℃
Conditions
IF=1.0A
VR=200V
IF=0.5A,IR=1A,Irr=0.25*IR
Rev.C
1/3
RF101A2S
Diodes
zElectrical characteristic curves
1
Ta=150℃
10000
100
Ta=125℃
Ta=125℃
Ta=75℃
0.01
Ta=25℃
Ta=-25℃
Ta=75℃
100
Ta=25℃
10
Ta=-25℃
1
0.1
0
1
0
100 200 300 400 500 600 700 800 900
FORWARD VOLTAGE:VF(mV)
VF-IF CHARACTERISTICS
50
100
150
REVERSE VOLTAGE:VR(V)
VR-IR CHARACTERISTICS
200
100
Ta=25℃
IF=1A
n=30pcs
830
820
AVE:818.6mV
810
800
Ta=25℃
VR=200V
n=30pcs
80
60
50
40
30
AVE:11.1nA
20
70
60
50
40
AVE:51.4pF
30
20
10
10
0
0
Ct DISPERSION MAP
1000
30
8.3ms
100
50
AVE:63.0A
Ta=25℃
IF=0.5A
IR=1A
Irr=0.25*IR
n=10pcs
25
20
PEAK SURGE
FORWARD CURRENT:IFSM(A)
RESERVE RECOVERY TIME:trr(ns)
1cyc
Ifsm
15
10
AVE:12.2ns
5
Ifsm
8.3ms 8.3ms
1cyc
100
0
0
30
Ta=25℃
f=1MHz
VR=0V
n=10pcs
80
IR DISPERSION MAP
200
25
90
70
VF DISPERSION MAP
150
5
10
15
20
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
100
90
REVERSE CURRENT:IR(nA)
840
0
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
850
PEAK SURGE
FORWARD CURRENT:IFSM(A)
10
0.01
0.001
FORWARD VOLTAGE:VF(mV)
1000
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
0.1
REVERSE CURRENT:IR(nA)
FORWARD CURRENT:IF(A)
f=1MHz
f=1MHz
Ta=150℃
10
1
1
trr DISPERSION MAP
IFSM DISPERSION MAP
10
100
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
Mounted on epoxy board
1000
1000
2
t
100
10
1
10
TIME:t(ms)
IFSM-t CHARACTERISTICS
100
Rth(j-a)
IM=1mA
100
time(s)
td=300us
Rth(j-l)
Rth(j-c)
10
1
0.001
DC
1.5
FORWARD POWER
DISSIPATION:Pf(W)
Ifsm
TRANSIENT
THAERMAL IMPEDANCE:Rth (℃/W)
PEAK SURGE
FORWARD CURRENT:IFSM(A)
IF=0.5A
D=1/2
Sin(θ=180)
1
0.5
0
0.01
0.1
1
10
100
TIME:t(s)
Rth-t CHARACTERISTICS
1000
0
0.5
1
1.5
2
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
Io-Pf CHARACTERISTICS
Rev.C
2/3
RF101A2S
Diodes
30
3
2
DC
t
t
V
VR
D=t/
D=t/T
VR=100V
T
T Tj=150℃
D=1/2
1
Sin(θ=180)
0
0
25
50
75
0A0
0V0
Io
100
125
AMBIENT TEMPERATURE:Ta(℃)
Derating Curve゙(Io-Ta)
150
Io
t
t
2
DC
VR
D=t/T
T VR=100V
T Tj=150℃
D=1/2
1
Sin(θ=180)
No break at 30kV
ELECTROSTATIC
DISCHARGE TEST ESD(KV)
0A
0V
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
3
25
20
AVE:22.6kV
15
10
5
0
0
0
25
50
75
100
CASE TEMPARATURE:Tc(℃)
Derating Curve(Io-Tc)
125
150
C=200pF
R=0Ω
C=100pF
R=1.5kΩ
ESD DISPERSION MAP
Rev.C
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0