Lighting Uniformity & ITE Conformity ITE COMPLIANT FEATURES / BENEFITS “XL” Series LED TRAFFIC SIGNALS All modules (including yellow) meet the ITE VTCSH-LED Circular Signal Supplement over the full temperature range of -40°C to +74°C EPACT 2005 compliant Robust Hi-Flux LED Technology Meets or exceeds ITE uniformity specifications (Better than 10-to-1) Expanded view radiation pattern suitable for span wire and steep grade applications Transient suppression exceeds ITE and NEMA specifications (Up to 6KV) Lowest wattage Red, Yellow, Green package on the market Meets or exceeds ITE moisture intrusion specifications Meets or exceeds ITE failed state impedance specifications Hard coated lenses for abrasion resistance SPECIFICATIONS Operating Voltage Range: 80VAC to 135VAC (120VAC nominal) Operating Temperature Range: -40°C to +74°C Turn-on / Turn-off Time < 75 msec Power Factor > 0.9 Total Harmonic Distortion < 20% Meets FCC Title 47, Subpart B, Section 15 regulations for electrical noise Failed State Impedance > 250K ohm within 300ms Conforms to MIL-STD-810F for blowing rain Conforms to MIL-STD-883, Test Method 2007, for mechanical vibration Conforms to MIL-STD-883, Test Method 1010, temperature cycling requirements LOWEST WATTAGE RED, YELLOW, GREEN PACKAGE ON THE MARKET Provided with quick connect terminals and spade adapters Written manufacturer’s warranty available on request All products traceable by serial number Luminance uniformity and color uniformity exceed ITE VTCSH-LED Circular Signal Supplement requirements Transient suppression exceeds ITE VTCSH-LED Circular Supplement requirements and meets the following standards: NEMA TS-2 Sec. 2.1.6 and Sec. 2.1.8 IEC 1000-4-5, 3KV, 2 ohm source impedance ANSI/IEEE C62, 41-2002; IEC 61000-4-12, 6KV, 200A, 100KHz ring wave Power supply is conformally coated for robust operation WE MEET THE NEW ITE REQUIREMENTS EVEN YELLOW AT 74°C Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDTS433XL001_E Lighting Uniformity & ITE Conformity ITE COMPLIANT “XL” Series LED TRAFFIC SIGNALS 8” (200MM) 120VAC SIGNAL MODULES Color Lens Type Dominant Wavelength (nm) Typical Wattage at 25°C Peak Minimum Maintained Luminous Intensity (cd) Meets ITE VTCSH LED Circular Signal Supplement 433-1110-003XL Red Tinted 625 6 165 433-3130-001XL Yellow Tinted 590 11 410 433-2120-001XL Green Tinted 500 8 215 433-2170-001XL Green Clear 500 8 215 Part Number 12” (300MM) 120VAC SIGNAL MODULES Color Lens Type Dominant Wavelength (nm) Typical Wattage at 25°C Peak Minimum Maintained Luminous Intensity (cd) 433-1210-003XL Red Tinted 625 8 365 433-3230-001XL Yellow Tinted 590 19 910 433-2220-001XL Green Tinted 500 9 475 433-2270-001XL Green Clear 500 9 475 Part Number Meets ITE VTCSH LED Circular Signal Supplement Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDTS433XL001_E