MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Bi-polar, 105℃ KME-BP Series ・Standard Bi-polar type ・Endurance : 1,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105℃ Rated Voltage Range Capacitance Tolerance Leakage Current 6.3 to 100Vdc ±20% (M) (at 20℃, 120Hz) I=0.06CV or 10µA, whichever is greater. (at 20℃ after 2 minutes) I=0.03CV or 3µA, whichever is greater. (at 20℃ after 5 minutes) Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Rated voltage (Vdc) 0.24 0.24 0.20 0.20 0.16 0.14 0.12 0.12 0.10 tanδ(Max.) When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Rated voltage (Vdc) 2 2 2 2 2 2 2 4 3 Z(-25℃)/Z(+20℃) 3 3 3 3 3 6 4 10 8 Z(-40℃)/Z(+20℃) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 1,000 hours at 105℃, however the polarization shall be reversed every 250 hours. Rated voltage 6.3 to 16Vdc 25 to 100Vdc Capacitance change ≦±25% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 16Vdc 25 to 100Vdc Capacitance change ≦±25% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 Code : E φD' φd Sleeve (PET : Brown) F±0.5 ●Terminal L' 15min. 4min. (φ5 to φ10) Vent (except φ5) φD φd F φD' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 (φ12.5 to φ18) Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 B KME A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0µF:1R0,10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 134 CAT. No. E1001N MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Bi-polar, 105℃ KME-BPSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 Cap (µF) Rated ripple Case size current tanδ (mArms/ φD×L(mm) 105℃,120Hz) 33 47 100 220 330 470 1,000 2,200 3,300 4,700 6,800 22 33 47 100 220 330 470 1,000 2,200 3,300 4,700 10 22 33 47 100 220 330 470 1,000 2,200 3,300 10 22 33 47 100 220 330 470 1,000 2,200 4.7 10 22 33 47 5×11 5×11 6.3×11 8×11.5 8×11.5 10×12.5 10×20 12.5×25 16×25 16×31.5 18×35.5 5×11 5×11 5×11 6.3×11 8×11.5 10×16 10×16 12.5×20 16×25 16×31.5 18×35.5 5×11 5×11 5×11 6.3×11 8×11.5 10×12.5 10×16 10×20 12.5×25 16×31.5 18×35.5 5×11 6.3×11 6.3×11 6.3×11 8×11.5 10×16 12.5×20 12.5×20 16×25 18×35.5 5×11 5×11 6.3×11 8×11.5 8×11.5 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.22 0.24 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.22 0.16 0.16 0.16 0.16 0.16 45 54 90 150 185 260 460 820 1,110 1,430 1,830 37 45 54 90 150 240 290 510 910 1,200 1,520 27 40 49 67 110 195 265 345 605 1,070 1,400 27 46 56 67 110 215 320 380 670 1,140 21 30 51 72 86 WV (Vdc) Part No. BKME6R3E□□330ME11D BKME6R3E□□470ME11D BKME6R3E□□101MF11D BKME6R3E□□221MHB5D BKME6R3E□□331MHB5D BKME6R3E□□471MJC5S BKME6R3E□□102MJ20S BKME6R3E□□222MK25S BKME6R3E□□332ML25S BKME6R3E□□472MLN3S BKME6R3E□□682MMP1S BKME100E□□220ME11D BKME100E□□330ME11D BKME100E□□470ME11D BKME100E□□101MF11D BKME100E□□221MHB5D BKME100E□□331MJ16S BKME100E□□471MJ16S BKME100E□□102MK20S BKME100E□□222ML25S BKME100E□□332MLN3S BKME100E□□472MMP1S BKME160E□□100ME11D BKME160E□□220ME11D BKME160E□□330ME11D BKME160E□□470MF11D BKME160E□□101MHB5D BKME160E□□221MJC5S BKME160E□□331MJ16S BKME160E□□471MJ20S BKME160E□□102MK25S BKME160E□□222MLN3S BKME160E□□332MMP1S BKME250E□□100ME11D BKME250E□□220MF11D BKME250E□□330MF11D BKME250E□□470MF11D BKME250E□□101MHB5D BKME250E□□221MJ16S BKME250E□□331MK20S BKME250E□□471MK20S BKME250E□□102ML25S BKME250E□□222MMP1S BKME350E□□4R7ME11D BKME350E□□100ME11D BKME350E□□220MF11D BKME350E□□330MHB5D BKME350E□□470MHB5D Cap (µF) 100 220 35 330 470 1,000 1.0 2.2 3.3 4.7 10 22 50 33 47 100 220 330 470 3.3 4.7 10 22 33 63 47 100 220 330 470 2.2 3.3 4.7 10 22 80 33 47 100 220 330 1.0 2.2 3.3 4.7 10 100 22 33 47 100 220 Rated ripple Case size current tanδ (mArms/ φD×L(mm) 105℃,120Hz) 10×16 12.5×20 12.5×20 12.5×25 16×31.5 5×11 5×11 5×11 5×11 6.3×11 8×11.5 8×11.5 10×12.5 10×20 12.5×25 16×25 16×31.5 5×11 6.3×11 6.3×11 8×11.5 10×12.5 10×16 12.5×20 16×25 16×31.5 18×35.5 5×11 6.3×11 6.3×11 8×11.5 10×16 10×16 10×20 12.5×25 16×31.5 18×35.5 5×11 6.3×11 6.3×11 6.3×11 8×11.5 10×16 12.5×20 12.5×20 16×25 18×35.5 0.16 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 160 290 350 465 805 10 15 18 22 37 63 77 105 190 340 460 590 20 24 40 68 98 130 225 405 535 680 16 23 27 46 89 105 140 245 435 570 12 20 25 30 50 97 140 170 300 510 Part No. BKME350E□□101MJ16S BKME350E□□221MK20S BKME350E□□331MK20S BKME350E□□471MK25S BKME350E□□102MLN3S BKME500E□□1R0ME11D BKME500E□□2R2ME11D BKME500E□□3R3ME11D BKME500E□□4R7ME11D BKME500E□□100MF11D BKME500E□□220MHB5D BKME500E□□330MHB5D BKME500E□□470MJC5S BKME500E□□101MJ20S BKME500E□□221MK25S BKME500E□□331ML25S BKME500E□□471MLN3S BKME630E□□3R3ME11D BKME630E□□4R7MF11D BKME630E□□100MF11D BKME630E□□220MHB5D BKME630E□□330MJC5S BKME630E□□470MJ16S BKME630E□□101MK20S BKME630E□□221ML25S BKME630E□□331MLN3S BKME630E□□471MMP1S BKME800E□□2R2ME11D BKME800E□□3R3MF11D BKME800E□□4R7MF11D BKME800E□□100MHB5D BKME800E□□220MJ16S BKME800E□□330MJ16S BKME800E□□470MJ20S BKME800E□□101MK25S BKME800E□□221MLN3S BKME800E□□331MMP1S BKME101E□□1R0ME11D BKME101E□□2R2MF11D BKME101E□□3R3MF11D BKME101E□□4R7MF11D BKME101E□□100MHB5D BKME101E□□220MJ16S BKME101E□□330MK20S BKME101E□□470MK20S BKME101E□□101ML25S BKME101E□□221MMP1S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ●Frequency Capacitance (µF) Multipliers Frequency (Hz) 1.0 to 4.7 10 to 47 100 to 1,000 2,200 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 135 CAT. No. E1001N