MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GXL Long life, 125℃ GXL Series ・Long-Life version of GXE series ・For automobile modules and other high temperature applications ・Endurance with ripple current : 5,000 hours at 125℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant Longer life GXE P189 ◆SPECIFICATIONS Characteristics Items Category Temperature Range -40 to +125℃ Rated Voltage Range 10 to 50Vdc (at 20℃, 120Hz) Capacitance Tolerance ±20% (M) Leakage Current I=0.03CV or 4µA, whichever is greater. (at 20℃, 1 minute) Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 50V 35V 25V 16V 10V Dissipation Factor (tanδ) (at 20℃, 120Hz) tanδ(Max.) 0.10 0.12 0.14 0.16 0.20 50V 35V 25V 16V 10V Low Temperature Rated voltage (Vdc) Characteristics Z(-25℃)/Z(+20℃) 2 2 2 2 3 (Max. Impedance Ratio) (at 120Hz) Z(-40℃)/Z(+20℃) 4 4 4 4 6 The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated Endurance ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 125℃. ≦±30% of the initial value Capacitance change D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without Shelf Life voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] Code : E φD' φd Sleeve (PET : Orange) F±0.5 ●Terminal L' Vent 15min. 4min. (φ10) φD φd F φD' L' 10 0.6 5.0 φD+0.5max. L+1.5max. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GX L AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 1,000µF:102) Lead forming·taping code Terminal code Voltage code (ex. 10V:100, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 191 CAT. No. E1001N MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, 125℃ GXLSeries ◆STANDARD RATINGS WV (Vdc) 10 16 25 35 50 Cap (µF) Case size φD×L(mm) 330 470 1,000 220 330 470 220 330 470 100 220 330 100 220 10 ×12.5 10 ×12.5 10 × 20 10 ×12.5 10 ×12.5 10 ×16 10 ×12.5 10× 16 10 ×20 10 ×12.5 10 ×16 10 ×20 10 ×12.5 10 ×20 Impedance (Ωmax/20℃, 100kHz) 0.17 0.17 0.094 0.17 0.17 0.12 0.17 0.12 0.094 0.17 0.12 0.094 0.30 0.19 Rated ripple current (mArms/125℃, 100kHz) 800 800 1,300 800 800 1,050 800 1,050 1,300 800 1,050 1,300 590 970 Part No. EGXL100E□□331MJC5S EGXL100E□□471MJC5S EGXL100E□□102MJ20S EGXL160E□□221MJC5S EGXL160E□□331MJC5S EGXL160E□□471MJ16S EGXL250E□□221MJC5S EGXL250E□□331MJ16S EGXL250E□□471MJ20S EGXL350E□□101MJC5S EGXL350E□□221MJ16S EGXL350E□□331MJ20S EGXL500E□□101MJC5S EGXL500E□□221MJ20S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ●Frequency Capacitance(µF) Multipliers Frequency(Hz) 100 220 to 470 1,000 120 0.40 0.50 0.60 1k 0.75 0.85 0.87 10k 0.90 0.94 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 192 CAT. No. E1001N