U37F SERIES Engineering Bulletin Mar 2013 U37F Series Large Can Screw Terminals General Purpose U37 Grade High Ripple 350 to 500VDC Ratings RoHS Compliant 5,000 Hours Lifetime at 85C Up to 150,000 Hours Useful Life Summary of Specifications Screw terminals: high and low post, English and Metric thread. Capacitance range: 1,500 to 22,000µF. Voltage range: 350 to 500VDC. Category temperature range: 40C to 85C. Leakage current: 0.02CV(µA) or 5mA, whichever is smaller, after 5 minutes at 25C. Standard capacitance tolerance: 20% Nominal case size (DL): D = 50mm (2.000”) to 89mm (3.500”); L = 92mm (3.625”) to 219mm (8.625”). Rated lifetime: 5,000 hours at 85C with rated ripple current applied. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 1/ 7 U37F L ARGE CAN 85C The U37F series is a general purpose, screw mount U37 grade series specifically designed to provide the ripple current capability and long life required for high reliability inverter applications.The U37F has an endurance rating of 5,000 hours at 85C with the rated ripple current applied. The useful life can exceed 150,000 hours at 40C and 1.5x the ripple current. These capacitors are available in a variety of high current English or Metric thread terminals. Mounting options include a three-footed clamp or bottom threaded stud. Custom designs are also available. Engineering Bulletin Mar 2013 U37F Series U37F Specifications - Screw Terminals Item Characteristics Category Temperature Range 40 to 85C Rated Voltage Range 350 to 500VDC Capacitance Range 1,500 to 22,000F at 25C, 120Hz Capacitance Tolerance 20% ( M ) at 25C, 120Hz Leakage Current I 0.02CV (A ) or 5mA, whichever is smaller, after 5 minutes at 25C. Rated Ripple Current Multipliers Ambient Temperature (C ) Where I = Max. leakage current (A ), C = Nominal capacitance (F ) and V = Rated voltage ( V ) 45C 65C 85C 2.82 1.73 1.00 Frequency (Hz ) DC Rated Voltage 50Hz 120Hz 300Hz 1kHz 3kHz 10kHz 350 -500V 0.80 1.00 1.20 1.30 1.40 1.41 To determine maximum ripple current at a specified temperature and frequency, use the appropriate multiplier shown. However, do not use both the temperature and frequency multipliers together. Endurance (Load Life) The following specifications shall be satisfied when the capacitors are restored to 25C after subjecting them to DC voltage for 5,000 hours at 85C with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors. Capacitance change: ≤ 20% from initial measurement ESR change : ≤ 200% of initial specified limit Leakage current : ≤ initial specified limit Useful Life Shelf Life With specified standard voltage and ripple current applied, typical life as function of ambient temperature is listed below. 85C 6,500 hours max. 65C 23,800 hours max. 45C 124,700 hours max. Capacitance change: ≤ 30% from initial measurement ESR change : ≤ 300% of initial specified limit Leakage current : ≤ initial specified limit The following specifications shall be satisfied when the capacitors are restored to 25C after exposing them for 500 hours at 85C without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. U37F L ARGE CAN 85C Capacitance change: ≤ 20% from initial measurement ESR change : ≤ 200% of initial specified limit Leakage current : ≤ initial specified limit Vibration Rating Maximum Tightening Torque 10 -55Hz, 10g sinusoidal in three axes, 2 hours per axis. Terminal Code Typical Inductance (nH) at 1MHz Custom Designs HL HP Thread Size 10 - 32 NF- 2B CD CP CH 1/4 - 28 M5x0.8 - 6H CA NF- 2B CS M6x1- 6H 3 Threads Engaged 2.0 N · m ( 18.0 in · lb) 4.0 N · m ( 35.0 in · lb) 6 Threads Engaged 2.8 N · m ( 25.0 in · lb) 6.2 N · m ( 55.0 in · lb) Terminal Code Case Diameter (mm ) HP HL CD CP CH CA CS Ø 50.8 — — NA NA NA NA NA Ø 63.5 — — — — — — — Ø 76.2 30 30 25 20 25 20 25 Ø 89.0 30 30 25 20 25 20 25 Custom CV values per case size and termination type may be available upon request. Contact appropriate representative with specific requirements. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. 2/7 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com Engineering Bulletin Mar 2013 U37F Series U37F Useful Life 3.0 The life expectancy of a capacitor is shown as a function of ambient temperature and ripple current load. 2.5 2.0 6 ,5 1.5 00 hrs 0 10, 25 50, hrs rs rs rs hrs 0h 00 ,00 000 00 h 00 h 0.5 0 100, 1.0 0 150, Ir/ Ir (rated) ratio Useful Life: 6,500 Hours at 85C 0.0 40 45 50 55 60 65 70 75 80 85 Ambient temperature (°C) Diagram of Dimensions - Screw Terminals Unit: mm (inches) Large Can / Screw Terminals Case Dimensions and Standard Box Quantities ØD 2.0 (0.080) L 1.0 (0.040) F 0.25 (0.010) Standard Box Quantity CB7 CD0 50.8 (2.000) 117 (4.625) 130 (5.125) 22.2 (0.875) 49 63.5 (2.500) 92 (3.625) 105 (4.125) 117 (4.625) 130 (5.125) 143 (5.625) 28.6 (1.125) 20 76.2 (3.000) 0092 (3.625) 105 (4.125) 117 (4.625) 143 (5.625) 181 (7.125) 219 (8.625) 31.8 (1.250) 92 (3.625) 105 (4.125) 117 (4.625) 143 (5.625) 155 (6.125) 190 (7.500) 219 (8.625) 31.8 (1.250) D92 DA5 DB7 DD0 DE3 Vent F Case Size Code E92 EA5 EB7 EE3 EJ1 EM9 S T F92 FA5 FB7 FE3 FF5 FK0 FM9 J L 09 05 H Note: In some cases, the color of the sleeve may change slightly due to the operating conditions, however, the discoloration will not impair capacitor function. Insulating End Disk D Terminal Specifications Terminal Code HP HL CD CP CH CA CS Available Case Diameter ØD ØD Code mm (inches) C C D–E D–F D–F D–F D–F 50.8 (2.000) 50.8 (2.000) 63.5 – 76.2 (2.500 – 3.000) 63.5 – 89.0 (2.500 – 3.500) 63.5 – 89.0 (2.500 – 3.500) 63.5 – 89.0 (2.500 – 3.500) 63.5 – 89.0 (2.500 – 3.500) Thread Size Minimum Thread Depth 10 - 32 NF- 2B M5x0.8 - 6H M5x0.8 - 6H 1/4 - 28 NF- 2B 1/ - 28 NF- 2B 4 M6x1- 6H M6x1- 6H 9.5 (0.375) 09.5 (0.375) 08.5 (0.335) 08.7 (0.344) 11.9 (0.468) 08.7 (0.344) 11.9 (0.468) H ØS ØT J 0.5 (0.020) 2.0 (0.080) 0.25 (0.010) 0.25 (0.010) 6.4 (0.250) 6.4 (0.250) 5.0 (0.200) 2.4 (0.093) 6.4 (0.250) 2.4 (0.093) 6.4 (0.250) LJ LJ LJ LJ LJ LJ LJ 08.0 (0.313) 8.0 (0.313) 13.0 (0.512) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 11.1 (0.438) 11.1 (0.438) 18.8 (0.740) — — — — Mounting Hardware is optional. Refer to hardware specifications on the following page. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 3/7 U37F L ARGE CAN 85C Black Insulating Sleeve (see note) 89.0 (3.500) 16 Engineering Bulletin Mar 2013 U37F Series Mounting Hardware - Screw Terminals Type C: Three-Footed Clamp Unit: mm (inches) 360 3 30 455 15 D A B T J G K 5.10.5 (2 holes) (0.2010.020) R Clamp: Zinc with silver trivalent chromate post treatment. S Hardware: Screw, washer and hexagon nut included with each clamp. Type C: Clamp Dimensions G J K R S T A B 1.0 (0.040) 1.0 (0.040) 1.0 (0.040) 0.5 (0.020) 0.5 (0.020) 1.0 (0.040) 1.0 (0.040) 0.5 (0.020) Mounting Code Case ØD C 50.8 (2.000) 31.8 (1.250) 36.5 (1.437) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 0.8 (0.032) C 63.5 (2.500) 38.1 (1.500) 42.9 (1.689) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 0.8 (0.032) C 76.2 (3.000) 44.5 (1.750) 49.2 (1.937) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 1.0 (0.040) C 89.0 (3.500) 50.8 (2.000) 56.5 (2.224) 16.0 (0.630) 4.5 (0.177) 8.0 (0.313) 21.0 (0.827) 9.0 (0.354) 1.0 (0.040) U37F L ARGE CAN 85C Type S: Stud Mounting Q M N P T Mounting Nut - Order Separately The insulated plastic mounting nut is not included with stud mount capacitor orders. It must be ordered separately. See available part numbers below. D Type S: Stud Dimensions 4/7 Insulated Plastic Hex Nut R K Mounting Nut Dimensions Mounting Code P 1.0 (0.040) T Thread Size Part Number ØK 2.0 (0.080) M 1.0 (0.040) N 1.0 (0.040) ØQ 1.0 (0.040) R 1.0 (0.040) S 16.0 (0.630) M12 50-8D 30.0 (1.181) 19.0 (0.748) 18.0 (0.709) 22.0 (0.866) 1.40 (0.055) 50-8E 38.0 (1.496) 19.0 (0.748) 18.0 (0.709) 30.0 (1.181) 1.40 (0.055) United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com Engineering Bulletin Mar 2013 U37F Series Part Numbering System for U37F Series When ordering, always specify complete 18-field global part number. 18 Fields 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E 3 7 F 4 0 1 C P N 1 0 3 M E J 1 M 9 8 7 6 5 4 1 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 5/7 U37F 2 Capacitance. Fields 11, 12 and 13. Expressed in Microfarads. The first two digits are significant figures inserted in fields 11 and 12, and the third digit inserted in field 13 indicates the number of zeros for capacitance of 10F or more. R indicates the decimal point for capacitance less than 10F (e.g. 1R0 = 1.0F; 100 = 10F; 101 = 100F; 102 = 1,000F; 103 = 10,000F ). Mounting Hardware. Field 10. N = None. C = Three-footed clamp. S = Stud mount. The mounting nut is not included with stud mount orders. It must be ordered separately. Terminal Type. Fields 8 and 9. HP = High post 10-32 NF- 2B screw thread. HL = High post M5x0.8 screw thread. CD = UTE M5x0.8 screw thread. CP = Low post 1/4 -28 NF-2B screw thread. CH = High post 1/4 -28 NF-2B screw thread. CA = Low post M6x1 screw thread. CS = High post M6x1 screw thread. DC Rated Voltage. Fields 5, 6 and 7. Expressed in Volts. The first two digits are significant figures inserted in fields 5 and 6, and the third digit inserted in field 7 indicates the number of zeros for rated voltage of 10VDC or more. R indicates the decimal point for rated voltage less than 10VDC (e.g. 4R0 = 4.0VDC; 400 = 40VDC; 401 = 400VDC). Series Name. Fields 2, 3 and 4. Enter the 3-letter/digit series name in fields 2, 3 and 4. If the series name is only 2 letters/digits, place a dash in field 4. For a series name with more than 3 letters/digits, refer to the individual series for the appropriate 3-field series name. Capacitor Type. Field 1. Aluminum Electrolytic Capacitor (Polar). L ARGE CAN 85C 3 Supplement Code. Field 18. C = PET insulation with end disk (Ø 50.8mm only). M = Pb-free PVC insulation with end disk. S = Polyolefin insulation with end disk. Case Size. Fields 15, 16 and 17. The single letter diameter code is inserted in field 15. C = Ø 50.8mm ( Ø 2.000”) D = Ø 63.5mm ( Ø 2.500”) E = Ø 76.2mm ( Ø 3.000”) F = Ø 89.0mm ( Ø 3.500”) The double character length code is inserted in fields 16 and 17. For lengths ≤ 99mm, insert the actual length rounded to nearest millimeter. For lengths of 100mm or more, insert the appropriate alpha numeric code as indicated below. 92 = 92mm (3.625”) A5 = 105mm (4.125”) B7 = 117mm (4.625”) D0 = 130mm (5.125”) E3 = 143mm (5.625”) F5 = 155mm (6.125”) J1 = 181mm (7.125”) K0 = 190mm (7.500”) M9 = 219mm (8.625”) Capacitance Tolerance. Field 14. M = 20% Engineering Bulletin Mar 2013 U37F Series Standard Voltage Ratings - Screw Terminals Rated Voltage (WVDC) 350 Volts 400 Volts Surge 400 Volts U37F L ARGE CAN 85C 450 Volts Surge 420 Volts 470 Volts Surge Capacitance (µF ) Global Part Number† Nominal Case Size* DL ( mm ) Case Size Code Maximum ESR ( mΩ ) at 25C, 120Hz Rated Ripple Current (A rms) at 85C 120Hz 300Hz >3kHz 3,300 3,900 3,300 3,900 4,700 5,600 5,600 4,700 5,600 6,800 8,200 12,000 15,000 6,800 8,200 10,000 12,000 15,000 18,000 22,000 E37F351HPN332MCB7M E37F351HPN392MCD0M E37F351CPN332MD92M E37F351CPN392MDA5M E37F351CPN472MDB7M E37F351CPN562MDD0M E37F351CPN562MDE3M E37F351CPN472ME92M E37F351CPN562MEA5M E37F351CPN682MEB7M E37F351CPN822MEE3M E37F351CPN123MEJ1M E37F351CPN153MEM9M E37F351CPN682MF92M E37F351CPN822MFA5M E37F351CPN103MFB7M E37F351CPN123MFE3M E37F351CPN153MFF5M E37F351CPN183MFK0M E37F351CPN223MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 28 23 28 23 19 16 16 20 17 14 12 8 6 14 12 10 8 6 5 4 10.8 12.2 11.2 12.7 14.5 16.4 17.0 14.5 16.5 18.9 22.2 29.4 35.4 19.1 21.8 25.0 29.3 33.8 40.0 46.7 12.9 14.6 13.4 15.2 17.4 19.7 20.4 17.4 19.8 22.6 26.7 35.2 42.5 22.9 26.2 30.0 35.2 40.5 47.9 56.0 15.1 17.0 15.6 17.7 20.3 22.9 23.7 20.2 23.1 26.4 31.1 41.1 49.6 26.7 30.5 35.0 41.1 47.3 55.9 65.4 2,700 3,300 2,700 3,300 3,900 4,700 4,700 3,900 5,600 5,600 8,200 10,000 12,000 5,600 6,800 8,200 10,000 12,000 15,000 18,000 E37F401HPN272MCB7M E37F401HPN332MCD0M E37F401CPN272MD92M E37F401CPN332MDA5M E37F401CPN392MDB7M E37F401CPN472MDD0M E37F401CPN472MDE3M E37F401CPN392ME92M E37F401CPN562MEA5M E37F401CPN562MEB7M E37F401CPN822MEE3M E37F401CPN103MEJ1M E37F401CPN123MEM9M E37F401CPN562MF92M E37F401CPN682MFA5M E37F401CPN822MFB7M E37F401CPN103MFE3M E37F401CPN123MFF5M E37F401CPN153MFK0M E37F401CPN183MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 30 26 30 25 21 19 17 21 17 15 12 9 7 15 12 11 8 7 6 5 10.4 11.6 10.7 12.3 13.8 15.3 16.8 14.3 16.4 18.4 22.3 28.2 34.0 18.6 21.2 23.8 28.9 31.4 38.3 43.9 12.5 13.9 12.9 14.7 16.5 18.3 20.1 17.2 19.6 22.0 26.8 33.8 40.8 22.3 25.5 28.6 34.7 37.7 45.9 52.7 14.6 16.2 15.0 17.2 19.3 21.4 23.5 20.0 22.9 25.7 31.3 39.5 47.6 26.1 29.7 33.4 40.5 44.0 53.6 61.5 2,700 3,300 2,700 3,300 3,900 3,900 4,700 3,900 4,700 5,600 6,800 10,000 12,000 5,600 6,800 E37F421HPN272MCB7M E37F421HPN332MCD0M E37F421CPN272MD92M E37F421CPN332MDA5M E37F421CPN392MDB7M E37F421CPN392MDD0M E37F421CPN472MDE3M E37F421CPN392ME92M E37F421CPN472MEA5M E37F421CPN562MEB7M E37F421CPN682MEE3M E37F421CPN103MEJ1M E37F421CPN123MEM9M E37F421CPN562MF92M E37F421CPN682MFA5M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 34 28 34 28 23 23 19 24 20 17 14 10 8 17 14 9.8 11.2 10.1 11.7 13.2 13.7 15.5 13.2 15.1 17.1 20.2 26.8 31.7 17.3 19.9 11.7 13.4 12.1 14.0 15.8 16.4 18.6 15.8 18.1 20.5 24.3 32.2 38.0 20.8 23.8 13.7 15.7 14.1 16.3 18.5 19.1 21.8 18.4 21.1 24.0 28.3 37.5 44.4 24.2 27.8 † For terminal, mounting and construction options, refer to the part numbering system for descriptions and codes. * Refer to diagram of dimensions for detailed case size specifications. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. 6/7 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com Engineering Bulletin Mar 2013 U37F Series Standard Voltage Ratings - Screw Terminals Rated Voltage (WVDC) 420 Volts 470 Volts Surge 450 Volts 500 Volts Surge 500 Volts 550 Volts Surge Capacitance (µF ) Global Part Number† Nominal Case Size* DL ( mm ) Case Size Code Maximum ESR ( mΩ ) at 25C, 120Hz Rated Ripple Current (A rms) at 85C 120Hz 300Hz >3kHz 89 117 89 143 89 155 89 190 89 219 FB7 FE3 FF5 FK0 FM9 12 10 8 6 5 22.7 26.8 30.3 36.5 42.2 27.2 32.1 36.3 43.8 50.7 31.7 37.5 42.4 51.1 59.1 2,700 2,700 2,200 2,700 3,300 3,900 4,700 3,900 4,700 5,600 6,800 8,200 12,000 5,600 6,800 6,800 8,200 12,000 15,000 15,000 E37F451HPN272MCB7M E37F451HPN272MCD0M E37F451CPN222MD92M E37F451CPN272MDA5M E37F451CPN332MDB7M E37F451CPN392MDD0M E37F451CPN472MDE3M E37F451CPN392ME92M E37F451CPN472MEA5M E37F451CPN562MEB7M E37F451CPN682MEE3M E37F451CPN822MEJ1M E37F451CPN123MEM9M E37F451CPN562MF92M E37F451CPN682MFA5M E37F451CPN682MFB7M E37F451CPN822MFE3M E37F451CPN123MFF5M E37F451CPN153MFK0M E37F451CPN153MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 34 34 42 34 28 23 19 24 20 17 14 12 8 17 14 14 12 8 6 6 9.8 10.1 9.1 10.5 12.1 13.7 15.5 13.2 15.1 17.1 20.2 24.3 31.7 17.3 19.9 20.6 24.3 30.2 36.5 38.6 11.7 12.1 10.9 12.7 14.6 16.4 18.6 15.8 18.1 20.5 24.3 29.1 38.0 20.8 23.8 24.8 29.1 36.3 43.8 46.3 13.7 14.2 12.8 14.8 17.0 19.1 21.8 18.4 21.1 24.0 28.3 34.0 44.4 24.2 27.8 28.9 34.0 42.3 51.1 54.0 1,500 1,800 1,800 2,200 2,700 3,300 3,300 2,700 3,300 3,900 5,600 6,800 8,200 3,900 4,700 5,600 6,800 8,200 10,000 12,000 E37F501HPN152MCB7M E37F501HPN182MCD0M E37F501CPN182MD92M E37F501CPN222MDA5M E37F501CPN272MDB7M E37F501CPN332MDD0M E37F501CPN332MDE3M E37F501CPN272ME92M E37F501CPN332MEA5M E37F501CPN392MEB7M E37F501CPN562MEE3M E37F501CPN682MEJ1M E37F501CPN822MEM9M E37F501CPN392MF92M E37F501CPN472MFA5M E37F501CPN562MFB7M E37F501CPN682MFE3M E37F501CPN822MFF5M E37F501CPN103MFK0M E37F501CPN123MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 63 55 52 43 37 32 29 36 30 25 20 15 12 25 21 18 14 13 10 8 7.2 8.0 8.2 9.4 10.5 11.7 12.8 10.9 12.5 14.0 17.1 21.5 26.0 14.2 16.2 18.2 22.1 24.0 29.2 33.5 8.6 9.6 9.8 11.2 12.6 14.0 15.4 13.1 15.0 16.8 20.5 25.8 31.2 17.1 19.5 21.8 26.5 28.8 35.1 40.2 10.1 11.2 11.5 13.1 14.7 16.3 17.9 15.3 17.5 19.6 23.9 30.1 36.3 19.9 22.7 25.5 30.9 33.6 40.9 46.9 † For terminal, mounting and construction options, refer to the part numbering system for descriptions and codes. * Refer to diagram of dimensions for detailed case size specifications. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 7/ 7 U37F E37F421CPN822MFB7M E37F421CPN103MFE3M E37F421CPN123MFF5M E37F421CPN153MFK0M E37F421CPN183MFM9M L ARGE CAN 85C 8,200 10,000 12,000 15,000 18,000