HRW0702A Silicon Schottky Barrier Diode for Rectifying REJ03G0159-0600Z (Previous: ADE-208-109E) Rev.6.00 Jan.06.2004 Features • Low forward voltage drop and suitable for high efficiency rectifying. • MPAK Package is suitable for high density surface mounting and high speed assembly. Ordering Information Type No. Laser Mark Package Code HRW0702A S15 MPAK Pin Arrangement 3 2 1 (Top View) Rev.6.00, Jan.06.2004, page 1 of 5 1. NC 2. Anode 3. Cathode HRW0702A Absolute Maximum Ratings (Ta = 25°C) Item Symbol 1 Repetitive peak reverse voltage VRRM * Value Unit 20 V Forward current 1 IF * 700 mA Non-Repetitive peak forward current 1.4 A Non-Repetitive peak forward surge current IFM IFSM *2 5 A Junction temperature Tj 125 °C Storage temperature Tstg –55 to +125 °C Notes: 1. See from Fig.4 to Fig.6 2. 10 ms sine wave 1 pulse Electrical Characteristics (Ta = 25°C) Item Symbol Min Typ Max Unit Test Condition Forward voltage VF — — 0.43 V IF = 700 mA Reverse current IR — — 200 µA VR = 20 V Capacitance C — 120 — pF VR = 0 V, f = 1 MHz Thermal resistance Rth(j-a) — 340 — °C/W Polyimide board Note: 1. Polyimide board 3.0 1.5 1.5 0.8 20h×15w×0.8t 1.5 Rev.6.00, Jan.06.2004, page 2 of 5 Unit: mm *1 HRW0702A Main Characteristic 10–1 10 Pulse test Pulse test 10–2 Ta = 75°C Reverse current IR (A) Forward current IF (A) 1.0 10–1 Ta = 25°C –2 10 0 0.2 0.4 0.6 0.8 1.0 10–4 Ta = 25°C 10–6 0 5 10 15 20 25 Forward voltage VF (V) Reverse voltage VR (V) Fig.1 Forward current vs. Forward voltage Fig.2 Reverse current vs. Reverse voltage 100 f = 1MHz Pulse test Capacitance C (pF) Ta = 75°C 10–5 10–3 10–4 10–3 10 1.0 1.0 10 40 Reverse voltage VR (V) Fig.3 Capacitance vs. Reverse voltage Rev.6.00, Jan.06.2004, page 3 of 5 HRW0702A Forward power dissipation Pd (W) D=1/6 0.5 0A t T t D=— T D=1/3 sin(θ=180°) 0.4 Tj = 25°C D=1/2 0.3 DC 0.2 0.1 0 0V t 2.0 T t D=— T D=5/6 Tj = 125°C D=2/3 1.5 D=1/2 1.0 sin(θ=180°) 0.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 Reverse power dissipation Pd (W) 2.5 0.6 0 5 10 15 20 25 Forward current IF (A) Reverse voltage VR (V) Fig.4 Forward power dissipation vs. Forward current Fig.5 Reverse power dissipation vs. Reverse voltage Average rectified current IO (A) 0.8 VR=VRRM/2 Tj =125°C Rth(j−a)=340°C/W 0.6 DC 0.4 sin(θ=180°) 0.2 D=1/2 D=1/6 D=1/3 0 −25 0 25 50 75 100 125 Ambient temperature Ta (°C) Fig.6 Average rectified current vs. Ambient temperature Rev.6.00, Jan.06.2004, page 4 of 5 HRW0702A Package Dimensions As of January, 2003 1.9 ± 0.2 2.8 + 0.2 – 0.6 + 0.2 1.1 – 0.1 0.3 2.8 +– 0.1 0 – 0.1 (0.3) (0.95) (0.95) + 0.10 0.16 – 0.06 (0.65) 1.5 ± 0.15 0.10 3–0.4 +– 0.05 (0.65) Unit: mm Package Code JEDEC JEITA Mass (reference value) Rev.6.00, Jan.06.2004, page 5 of 5 MPAK — Conforms 0.011 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2003. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon 1.0