REVISIONS NO. DESCRIPTION DATE BY 2.0 • See Note 6 A 4.0 • See Note 1 Ø1.5+0.1/-0.0 0.30 ± 0.05 1.75 2.5 R0.3 MAX. 11.5 • See Note 6 Bo 24.0 ± 0.3 Ko K1 16.0 Ao SECTION A-A R0.5 Typical Ø1.50 MIN Notes: 1. 10 sprocket hole pitch cumulative tolerance ± 0.2 2. Camber not to exceed 1mm in 100mm 3. Material: Black Conductive Advantek Polystyrene 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. A Ao = 10.5 mm Bo = 14.6 mm Ko = 1.7 mm K1 = 1.1 mm - All Dimensions in Millimeters TOLERANCES Advantek Part Number TSOP40-D TSOP40 Carrier Tape SGS Tool (EXCEPT AS NOTED) A DECIMAL ± 0.1 FRACTIONAL ± ANGULAR DRAWN BY DESIGNED BY SDC SCALE MATERIAL 2:1 see Note 3 DATE DRAWING NO. 3/21/95 A0615-95-1 ± REV